Our range of mono pulverizers is used for grinding different types of spices, salt, coffee, sugar, fresh fruits, vegetables, herbs, tobacco, leaves, oil cake, cattle and poultry feeds and other food products. These mono pulverizers are widely demanded by clients and have superior characteristics that includes:

• Compact size
• Dust free operation
• Ideal for dry as well as wet-pulpy crushing
• Highly effective as well as non stop continuous crushing
• Single pieces crushing chamber with no separate joints of fabrication for outlet
• Increased production leading to faster return on the investments
• Hardened & fully machines beaters
• No wastage of product
• Causes no pollution

Model	TW-1	TW-2
Chamber size	6 Inch x 3 Inch	8 Inch x 2 Inch
DIA X WIDTH	152mm X 75mm	200 mm X 50 mm
Motor (HP) 1.5	1.5	1.5
Grinding Speed (RPM)	2880	2880

Avail from us, a wide array of mini pulverizers that is designed to offer effective and continuous grinding. These products are applicable for various spices, fresh fruits, garlic, coffee, sugar, fruit pulp, herbs, vegetables, poultry feeds, custard powder, icing sugar, instant food and various other allied food. These mini pulverizers are known for their superior features that are:

• Increased production
• No wastage of product
• Single pieces grinding chamber no separate joints of fabrication for out late
• Rotating parts are balanced for reducing friction loss & noise
• Four numbers beaters are from special steel & single piece (without joints ) are hardened &
• Dust free operation
• No pollution hazards

The technical specifications includes:
 

Model	TW-4	TW-5	TW-6
Chamber size	8 Inch X 3 Inch	10 Inch X 4 Inch	12 Inch X 4 Inch
DIA X WIDTH	200 mm x 75 mm	250 mm x 100 mm	300 mm x 100 mm
Motor (HP)	2 to 3	5 to 7.5	7.5 to 10
Grinding Speed(RPM)	5000	5000	5000

Designed to give maximum output to our clients, our range of mini pulverizer with water circulating system is suitable for effective as well as continuous grinding. These mini pulverizer with water circulating system have chamber, water chamber & outlet that helps in avoiding joints for leakage of water as well as spreading of powder. These machines are used in grinding different kinds of spices, fresh ginger, salt, coffee, fruits, vegetables, herbs, roots, bark & leaves, cattle & poultry feeds, custard powder, food colors and various other products. The various features include:

• Four numbers beaters are from special steel & single piece (without joints ) are hardened & balanced are sledding to pirated overload
• Heavy duty channel stand & anti vibrating basements
• Suitable for Dry & Wet pulpy grinding
• Rotating parts are balanced for reducing friction losses & noise
• Dust free operation
• No wastage of product
• No pollution hazards

Model	TW-4SUPER	TW-5 SUPER	TW-6SUPER
DIA X WIDTH IN INCH	8 X 4	10 X 4	12 X 4
Motor (HP)	2 To 3	5 To 7.5	7.5 To 10
Grinding Speed (RPM)	4500	5000	5000

We offer our clients with multi chamber pulverizers that comes with a second chamber used for fine grinding. These machines do not have any separate joints between out late & crushing chamber. Our multi chamber pulverizers comes with back loading type system that helps in easy cleaning. The various features of our range of multi chamber pulverizers includes:

Model	TW-84	TW-124
Chamber size	8 Inch X 4 Inch	12 Inch X 4 Inch
DIA X WIDTH	200 mm x 100 mm	300 mm x 100 mm
Motor (HP)	3 to 5	7.5 to 10
Grinding Speed(RPM)	5000	5000

The Techno Wings Impact Pulverizers meets most capacity requirements. It lend themselves to a wide degree of adjustment with finesse of the finished products ranging from about 60 mesh to bulk passing through 300 mesh depending to a considerable extent on the particular materials being handled.

Advantages of Techno Wings Impact Pulverizers includes:

• It combines Grinding, Classifying and conveying all in one single unit
• It grinds with easy, economy and safety offering a wide range of particle  sizing of any non-abrasive material, hard or soft from granular to finest dust up to 300 meshes

Operations:

The Techno Wings Impact Pulverizers consists of an encased rotor carrying  swing hammers, whizzed classifier for finesse regulation and  pressure gradient creator mounted on a  solid shaft. Raw material from the feed  hopper enters manually or automatically roll feeder and as the feeder and as
 the feeder pockets rotate spills into the grinding chamber. The impact to the hammers on the feed material against the liner plates reduces it into fine  powder. The ground material carried towards the whizzed classifier for clarification and the finesse regulators (whizzed classifier) and returns to the  grinding chamber for further grinding reject the oversize particles. Classified  material then conveyed into the cyclone for collection and bagging. A dust collector is also provided in the system for  ensuring dustless operation and no loss of ground powder.

Techno Wings Hammer Mill

Our ranges of Techno wings brand hammer mills are available in various  sizes. These hammer mills are recommended for powdering grains,  chemicals, herbs, minerals, spices, cattle feed, chemicals, oil cake, tea,  coffee, crude drugs, molding powder, dry soap, charcoal, etc. These  machines known for the different features that includes:

• Improved crushing efficiency
• Minimized power consummations by the way of fiction
•  lose.
• Low temperature
• Hammer Mill's Operation

The materials to be ground into the crushing chamber of hammer mill from feed hopper by gravity or through an  auto feeder (optional) the beaters inside the drum accelerate the material to a very high speed to the toothed liner  placed at the upper half of the crushing chamber. Shearing pulverizes the material. The ground materials  continuously sucked by a centrifugal blower through screens placed at the bottom periphery of the crushing  chamber and conveyed through a pipe into the cyclone dust collector for bagging. Excess air filtered through a  cotton balloon. Particle size varied using screens with different size hole.

Product Features:

• Construction of Hammer Mill  is made from heavy duty Mild Steel fabricated body
• Grinding Chamber lined with serrated wear
•  plates protects the body from wear and tear
• Grinding done by a set  of swinging blades or Hammers on a balanced rotor
• A screen classifier  forms the lower half of the grinding chamber

For Super Model

For Standard / Economical model,

• Standard Accessories
• Machine & Motor pulley
• Two Numbers Cotton Balloons.
• Three numbers of Screen
• Motor Rail
• Optional Accessories at extra Cost
• All Contacting parts in Stainless Steel.
• Electric Motor, Starter, Ampere meter, Wire
• V Belts
• TCT tips bras sing on Rotor Blade for batter life of the blades.
• Model No. Chamber Size Type Capacity Per/Hour HP
• TW-48E 4" X 8" Economic 20-25 Kg. 2
• TW-510E 5" X 10" Economic 30-35 Kg. 3
• TW-612S 6" X 12" Super 50 Kg. 5
• TW-612E 6" X 12" Economic 60 Kg. 5
• TW-714S 7" X 14" Super 100 Kg. 10
• TW-714E 7" X 14" Economic 70 Kg. 10
• TW-1016S 10" X 16" Super 200 Kg. 20
• TW-1020S 10" X 20 Super 250 Kg. 25
• TW-1224S 12" X 24" Super 400 Kg. 40
• TW-1326S 13" X 26" Super 800 Kg 50
• The Rotor & Blower driven by single shaft there is
•  single speed of rotor and blower.
• Blower driven on a separate shaft with the help of a ‘V’
•  Belt adjustable drive from the rotor shaft.

We manufacture and export pounding machines. The pounding machines are ideal for making powder of food grains and Ayurvedic medicines in traditional methods.
These pounding machines are known for their superior quality and long working life. The various features of our machines includes:

• Cam lever arrangements for extra power to hammer
• Heavy c I khul
• Automatic stirrer in the chamber to shift the materials while hammering. Specially designed liver to lock un lock the hammering process. Sieving can be done while hammering is locked/ stopped
• Flywheel with pulley
• Easy smooth operations
• Less noise
• Grinding is carried out in a cool atmospheric temperature, which guarantee against any thermal degradation of product quality & flavors
• Dust free operation
• No wastage of product
• No pollutions hazards
• Low maintenance
• Saves recurring costs

The different specifications of our pounding machines include:

Model no	TW-101	TW-201
Hammers	Two	FOUR
Hammers Diameter	50 mm	50 mm
Hammers Lengths	1200 mm	1200 mm
Cam	Two ( Made from steel cast iron)	Four (made From Steel cast iron)
Drive	V- belt type	V- belt type
Power Supply	1 Horse Power X 1550 R.P.M.	1.5 Horse Power X 1440 R.P.M.
Flywheel with pulley	425 mm	425 mm

Jas Enterprises offers masala mills, which grinds Maize, Spices, Cattle Feed, and Poultry Feed etc. It provided with a set of three numbers of perforated round holes screens, one brush for cleaning the machine. Is also has 3 Meter Cable with a Plug and fitted with ampere meter and Miniature Circuit breaker for overload protection for motor. Also equipped with beaters, these masala mills are fully machined and balanced. Its feature includes dust free operation; does not waste product and cause no pollution  hazards. Another feature of this mill is that effective and continuous crushing leads to increased productio and faster return on investments.

The different types of standard accessories that are supply with our Masala (spices) mills are:

• A set of three Nos. perforated round hole screens are supply with the machine
• 3-meter cable with plug with Miniature Circuit Breaker or Starter will be fit for overload protection for motor.
• 2 Number Cotton Balloon
• Electric motor as per model number.

Features:

• Model No Jas 1302 Jas 1305 Jas 1310
• Chamber Size 12 “ X 06 12 X 06 12 X 12
• Motor H.P.( KW) 2 ( 1.75 KW) 5 (3.75 KW) 10 (7.5 KW)
• RPM 2880 2880 2880
• Size of machine 115 X40X68 CM
• 88 KGs. Approx
• 137 X 54X89 Cm
• 200Kgs.(Approx

Operation

The flow of material from the Feeding Hopper is regulating by means of side handle easily to suit the load.

Rotor with four cutters runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner  fitted inside the top half of the crushing chamber, leaving a gap of 1/8" between the liner teeth and the tips of the  rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a  high speed of 2880 rotations per minute. After the required size reduction, the material will pass through the  screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate  size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber  forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a  Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be  used)

Servicing Guidelines:

Open the cover of chamber all grinding parts clean with a brush in couple of minute and the Pulverizer is ready  for next crushing. If required, the grinding chamber can also be wash with water. Remove the cotton balloon and  the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The  grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes  as the draft of the fresh air sucked into the grinder will dry it. The beater when worm out removed and reserved  by removing the cur clip lock holding to the rotor pins. When both the edges are worm out, they sharpened on  an emery stone, to be use as new. In addition, when completely warn out, replaced the equal weight and refitted.