The elastomer liners of Slim-seal and Aqua-seal wafer-type butterfly valves are moulded directly on to the body and vulcanized in-situ. These integrally moulded liners last the entire life of the valve and require no maintenance.

Slimseal and Aquaseal are fit-and-forget valves, designed to outperform valves with loose liners.

Salient Features

* Longer life
* Bubble-tight sealing
* Low torque
* Assured sealing to atmosphere
* Easy installation

Type	Pressure rating	Units	Size Range
Slimseal	PN 16	Inches	2-24
Slimseal	PN 16	mm	50-600
Aquaseal	PN 10	Inches	2-12
Aquaseal	PN 10	mm	50-300

Materials of Construction
Slimseal - BS1452 Gr.250, BS2789 Gr.420/12, WCB, BS1400 AB2, CF8, CF8M, other materials available on demand.
Aquaseal - BS1452 Gr.200

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Helicoil Free Running Inserts

We are offering Helicoil Free Running Inserts.
HeliCoil standard range is available in Stainless Steel AISI-304/ DTD734, metric series ranges from M1.6, M2 to M56 & in unified series from UNC / UNF 1-64 to 1-1/2 inch. HeliCoil is also available in strip feed or reel mounted form, HeliCoil in strip feed form are best suited for significantly reducing the installation time using power tool for installation of inserts.
HeliCoil Inserts or Wire Thread Inserts are made of cold rolled 18-8 grade Stainless Steel to AS7245 , MIL-I-8846 & DTD734 specifications. This wire is cold rolled to a diamond cross section producing an ultimate tensile strength of approximately 1375-1725 MPa, mirror like surface finish of 2-4 Microns and flank hardness of RC 43-50 which is far in excess of the usual tapped materials and best suited for most of the industrial needs. HeliCoil Inserts can also be supplied in other materials such as SS-316, Inconel X-750, Titanium Alloys, Nimonic 90, Nitronic 60, Phosphorus Bronze, Beryllium Copper and with special coating and plating requirements such as Cadmium plating, Silver plating, Zinc plating, Nickel plating and dry film lubricants, Anti- Corrosion/ Salt spray resistant coatings.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Pipe Fittings

Pipe fittings :
Offering forged pipe fittings, carbon steel forged fittings, nickel : stainless steel : ASTM A 182 GGADE : F 304, 304L, 304H, 316, 316L, 316TI, 310, 310S, 321, 321H, 317, 347, 347H carbon steel : ASTM A 105, A187, (IBR & non IBR) alloy steel : ASTM A 182, grade F1, F11, F22, F5, F9, F91 (IBR & non IBR) nickel alloys : monel 400 & 500, inconel 600 & 625, incolloy more.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Torque Screwdrivers ( Norbar Make )

Norbar's new range of Torque Screwdrivers embodies the values of the TT Series brand: accuracy, ease of use and comfort in use. With an accuracy that exceeds the requirement of ISO6789 (+/-6% for tools up to 10 N·m). Furthermore, they are engineered to retain this accuracy over many thousands of tightened cycles. Available in N·m, lbf.in or production 'P' Type models.

Torque Range - 1.5N.m to 6N.m

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Toggle Clamps

Toggle Clamps (Vertical Flange Base Toggle Clamps)

Our company is renowned Supplier of Vertical Flange Base Toggle Clamps in Mumbai. The Vertical Flange Base Toggle Clamps have a flanged base with holes for mounting on the fixture plate Handle remains in vertical position in clamping. We provide high-quality Vertical Flange Base Toggle Clamps to our clientele.

Features of Vertical Flange Base Toggle Clamps

Standard Hex. Head clamping spindle assembly is provided as standard accessory with all above clamps
U-arms models are provided with 2 nos. u-flanged washers also along with clamping spindle assembly
The SF series have a solid down bar which has fixed guide bush at its end for the spindle assembly
The UB series have a 'U' bar arm which enables one or more spindles to be moved into any desired position along the arm

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Hydraulic Hose Pipe and Fittings

Offering Hydraulic Hose Pipe and Fittings:
The Rubber/Hydraulic Hose Pipes and Fittings are widely appreciated by our clients for unmatched quality and performance. These are manufactured using superior quality material that are sourced from the reliable vendors of the market. Owing to the excellent properties, these are widely demanded in various industries. We offer customized rubber/hydraulic hose pipes and fittings in accordance with the clients specification at the competitive prices.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Torque Wrenches ( NORBAR )

Norbar manufacture an extensive range of high quality torque wrenches to cover torque values from 1 N·m to 2000 N·m. They are designed and manufactured to exceed international standards for accuracy.

In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.

All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 550 N·m.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

MS / SS / CS / HDPE Flanges

We offer an extensive range of MS / SS /C Steel / HDPE Flanges, which is offered in various technical specifications to meet the variegated demands of the clients. It is manufactured in compliance with standards and quality norms set by the industry. We offer flanges in high grade material to ensure safety while transition to the clients.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

CP Fire Hose

Item Code: Droplet

With the help of our expert professionals, we have been able to offer Droplet CP Fire Hose. These controlled percolation flexible fire hoses are marked with IS: 8423-1994 and manufactured using droplet brand C.P synthetic fabric. Owing to their features like extra strength, excellent shelf life and durability, these hoses are widely demanded by the customers.

Features:

Extra Strength, excellent shelf life and durability.
Jacket of hose is made of high grade 100% synthetic yarns for extra strength and excellent shelf life and durability
Light weight and flexible fire fighting hose with controlled percolation to protect the jacket from the effect of heat and flame
Resistance to heat and mildew
Ability to withstand high operating pressure
Standard length: 7.5, 10, 15, 22.5, 30 meters

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

CI / SS / MS / CS Ball Valve

Offering CI / SS / CS / Gunmetal Gate Valve:

The Cast Steel/Forged ball Valve is designed by our experts in varied specifications to match the clients' expectation and needs. It is widely appreciated by the clients owing to the excellent performance and high tensile strength. The valve is manufactured using quality tested material and machinery.
Technical Specification:

Model: NVIL 5
M.O.C: A105/F304/F316
Design: 3Pc. Scr./S.W
Rating: 800# to 1500#
Size: 15MM TO 50MM
Model: NVIL
M.O.C: WCB/I.C.
Design: 3Pc. Scr./S.W
Rating: 150# to 300#
Size: 15MM TO 50MM

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Hydraulic Hose Pipe & Fittings

We are offering Hydraulic Hose Pipe & Fittings.

The Rubber/Hydraulic Hose Pipes and Fittings are widely appreciated by our clients for unmatched quality and performance. These are manufactured using superior quality material that are sourced from the reliable vendors of the market. Owing to the excellent properties, these are widely demanded in various industries. We offer customized rubber/hydraulic hose pipes and fittings in accordance with the clients specification at the competitive prices.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Mould Clamps

Our company is a well-known Supplier of Mould Clamps in Mumbai. We supply a wide range of Mould Clamps. Our range of Mould Clamps includes the U Type Special Mould Clamps and the Mould Clamp With Heavy Support. The Mould Clamps supplied by our company are used for Plastic Injection Moulding & Pressure Die Casting machines.
Features of Mould Clamps

Front portion of the clamp holds the mould
No spacer packings are required at the rear of the Mould Clamps since the body is sell positioning
Special swivel washer rests on the curved grooves and the centre distance is easily set
Flange nut is tightened on the special washer
Supplied complete with Studs/T-bolts/Swivel Washer, Flange Nut

Uses of Mould Clamp : Useful for clamping of moulds on plastic injections moulding machines and pressure die casting machines and other low height clampings on presses etc.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Broach Cutters

We are providing our customers with an extensive range of Broach Cutters. The offered products are manufactured by making use of supreme quality raw material and technically advanced machinery. Besides, these products match up the set quality standards, which demonstrate the high standard of the same. Our products are widely admired by patrons for their below cited features:

High tensile strength
Longer functional life
Easy and effectual operations
Rust resistant
Abrasion resistant

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

HDPE Pipe Fittings

Offering HDPE Pipe Fittings:
HDPE Pipe Fittings are extensively used for Jointing and Welding purposes of pipes and pipe ends. We have carved a niche as one of the key Industrial HDPE Pipe Fittings manufacturers and Suppliers based in India.High Density Polyethylene Pipe Fittings offered by us are available in a variety of sizes and dimensions. High quality plastic is used in the production to assure the durability of the High Density Polyethylene Pipe Fittings.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Reversible Angle Drill

Offering Kobe 10mm Reversible Angle Drill Dar1510 :
0mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm
Specifications:1/4" NPT air inlet thread for 10mm air hose. 90PSI air pressure. 4CFM* air consumption. 3/8" - 24 spindle thread.
Overall length 178mm.
*Based on a 15 second cycle per minute average use.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

HDPE Ball Valves

Offering HDPE Ball Valves:
Customized as per the specifications of our clients, our wide range of HDPE Ball Valves is in wide demand across the globe. Procured from reliable vendors spread across the globe, our range is in compliance with various industrial standards.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Mould Clamp

Our company is a reputed Supplier of Mould Clamp With Heavy Support in Mumbai. We provide high-quality Mould Clamp With Heavy Support on a timely basis. This ensures that our company meets the demands of its clients effectively. The Mould Clamp With Heavy Support is used for presses, Plastic Moulding Machines, Milling/Drilling Machines and in the design of Jibs & Fixtures.

Features/Uses of Mould Clamp With Heavy Support

Ideally suited to hold mould on injection moulding machines & die plates on press platen
Counter height adjustment provided by heavy duty support with hex and round base and lock-nut
Clamp with support screw. Lock Nut-T-Bolt/Stud, Hex hi-nut, washer

Other Information

Packaging Details: Specifications
Item Code Model Bolt Size A B D x L S T Support Bolt
10401 PMCH - 12115 M 12 24 38 14 x 115 65 15 M 16 x 55
10402 PMCH - 16130 M 16 31 48 18 x 130 70 20 M 20 x 60
10403 PMCH - 16160 M 16 31 48 18 x 160 90 20 M 20 x 60
10404 PMCH - 20140 M 20 38 60 22 x 140 70 20 M 24 x 60
10405 PMCH - 20160 M 20 38 60 22 x 160 90 20 M 24 x 60
10406 PMCH - 20200 M 20 42 60 22 x 200 110 20 M 24 x 100
10407 PMCH - 24200 M 24 45 75 26 x 200 105 22 M 24 x 100

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

CI / SS / CS / Gunmetal Gate Valve

Offering CI / SS / CS / Gunmetal Gate Valve:

The Forged Flanged End Gate/Globe/Check Valve offered by us is widely demanded by the clients across the country. It is appreciated for user friendly features like corrosion resistance, quality and performance. Owing to these features, the valve is applicable in various industries.
Technical Specification:

Model: NVIL 13
M.O.C: A105/F304/F316/F22/LF2
End: Scr./S.W./B.W.
Design: Bolted Bonnet/ Seal Weld bonnet
Rating: 150# to 1500#
Size: 15MM TO 50MM

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Fire Hose Type 'B'

Offering Fire Hose Type 'B'.
Item Code: Torrent-Armor

Our customers can avail from us a wide range of Torrent-Armor Fire Hose Type 'B', which is manufactured as per IS:636 Type 'B'. These non percolating flexible fire hoses are manufactured using 100% synthetic yarn with nitrile rubber extrusion via weave, which provide 'unified contraction'. For low friction loss, these hoses have smooth inner surface. Additionally, for high abrasion resistance & ease of handling, these hoses are provided with external cover with ribs.

Features :

The hose is resistant to different types of attack: abrasion, oils, acids, chemicals, cracking, heat, adverse weather conditions, delamination, kinking, ozone, petroleum
High abrasion resistance
Ribbed for hose protection & ease of handling
Minimum maintenance, easy to clean & requires no drying after use
Long life flexible & compact
Standard Length: 15, 18, 22.5, 30 meters
Available in blue, yellow & black colors

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Precision Measuring Instruments & Tools Spares

Offering Spares for Precision Measuring Instruments & Tools.
Available ex-stock full range of original spare parts & Accessories of MITUTOYO Measuring Instruments Mitutoyo spare parts & are having two decades of experience & Expertise Superior quality Indian spares also available ex-stock We also stock full range of special purpose & nonstandard measuring instruments of Mitutoyo & other reputed brands like M & W, KRISTEEL-SHINWA, BAKER, HIP etc. Repairing jobs of both Mechanical & Digimatic Instruments are also undertaken.

Offer Date: 07-MAY-13

Send Response

Your Name:*

E-Mail:*

Website:

Company Name:

Country:

Phone:*

Mobile:

Please Fill in Your response here:*

Enter the code shown on image:*

Jay Bee Enterprise/ Neel Industries
Mr. Sanjiv Shah (Proprietor)
General Tube House, No. 53, Bhajipala Lane, 2nd Floor, Nagdevi Street, Masjid Bunder West
Mumbai - 400 003, Maharashtra, India

Contact via E-mail

Contact via SMS