Jay Hanuma Engineering Works

H.V.COIL WINDING MACHINE UPTO 1000KVA

 Speed all gear head suitable for making section coil with round winding for transformer coil daya 450m.m with reversable wire guide and wire setting scale (auto) cut off at per set number of turns to have and smooth starting is a belt tensning arrangment with  convently be opperated by hand and foot paddle.

 Renge of wires               :10to26 SWG maximum coil diametre   :350Mm

Layer width                    :15 to250mm

Windingspeeds               :120,180,360 r.p.m

Hight of centres over floor: 1000 mm

Motor                              :1H.P/three 

1.Technical specifications:Max carrying capacity between centre – 2000 kgs (incl former)Centre height of machine over floor – 1000 mmCentre distance between faceplate & Tailstock centre – 1500 mmSize of faceplate – 400 mmType of Tailstock – Swing away type, Size of centre on Tailstock – MT4Min/Max dia of insulated conductors wound – 1 – 5.25 mm (Please specify individual wire dia to be used)Max cross section of strip conductor – 14 x 4 mm, 2 in parallelMax size of coil to be wound – Dia 550 x 1200 mm longWinding speed – 15 -45 & 60 -180 rpm, infinitely variable in both rangesMotor Power – 5 HP MOTOR MAKE (Crompton Greavs) Machine will be completed withelectrical control panel with AC VVF drive, and conductor layering arrangement for both Round & Strip conductor. Machine equipped with mechanical brake on main spindle, foot pedal and preset type electrical revolution counter. Supply complete with Bobbin stand and tension arrangement for single Round conductor and max two no Strip conductor complete.

Vacuum Oven (Heating Chamber)

 ·  VacuumCapacitycontinuously     0.5Torr

·    ElectricalHeatingcapacity          80to100k.w

·    Temperature                            90to100^oC

·     Construction  By M.S.sheet

·       Wallsthickness                       150mm

·       Chamber will be door type and fully sealed by gasket/ Woolen felt.

·        Door clamping facility will be provided.

·        Constuction will be water leek proob weld.

·        Hot air circulation by bilower

·        Finished with Approved aluminium paint

  2-Rotary Oil Sealed Vacuum Pump will be provide:

 ·         Pump                                 7500

·         Motor H.P                           7.5 H.P

·        Make                                  Prominent model psz-7500

 Note: Cooling Water Supply at ambient temperature for the VacucmPumps shall be provided by you.

 3.         Trolley

            Trolley runs on rail will be provided with the ovan and movement of trolley in and out of the ovan shall be by means of crane existing in your factory.

 4.         Electric Heaters

 Heater will be provided on side walls and bottom wall of the ovan. These heaters inside of pipeline will be mounted inside of bottom and side walls. Hot oil will be circulated through these pipes.

Electrical heaters of 80 to 100 k.w capacity will be placed inside these pipes.Thermostats and a Dial Thermometers will be provided on this Heat Exchanger for temperature control. A Safety Thermostat will be provided.

 A Pressure Safety Valve will be provided. The tempreture 90 to100^oC.

 A centrifugal pump will be provided for circulation of oil through pipeline and heat exchanger. The pipeline will be thermally insulated to minimise loss of heat. Quantity of Heat Transfer Oil required for first filling will be supplied by the customer.

 5  .       Electrical Control Panel

 

Collepsable formers have three type
1. Wedge type
2. Umbrella type
3. Disc Type

Former made wood and abs materials.