Jay Industries

Offering milling cum drilling machine:
We are leading manufacturer of drilling machines since 1982.
Drill Cap in M.S. : 25
End Mill Cap in M.S. : 20
Tapping Cap in M.S. : 20
Column Diameter : 90
Spindle Taper Bore : MT-3
Spindle Center To Column : 206
Auto feed Range : Fine Feed
Spindle Speed(RPM x Steps) : 8 / 80- 2600
Longitudinal Travel : 400
Cross Travel : 225 Max/Min.
Dist. from Spindle nose to table : 150
Electric Motor : 1 HP V-Belt : B-46
Over All Dimension of the Machine (L x W x H) : 25 x 15 x 46 Weight (without Stand): 285 Kg.

Offering Sensitive Bench Type Drilling Machine: - Drill Cap in M.S. : 25 - Drilling Cap. in C.I.: 32 - Tapping Cap in M.S.: 15 - Column Diameter : 90 - Spindle Taper Bore: MT-3 - Spindle Center To Column: 206 - Auto feed Range: Fine Feed - Spindle Speed(RPM x Steps): 100-2650 x8 - Diameter of RAM: 72 - Spindle Travel: 160 - Max/Min. Dist. from Spindle nose to table: 560 - Table Size: 325 x 325 Square - Dist. From spindle nose to base: 950 - Electric Motor: 1HP - V-Belt: B-46 - Machine Measurement (LxBxH): 500 x 304 x 1600.

We are offering Milling Cum Drilling Machine with following specifications :

- Capacity in mild steel : 50
- No. of spindle speeds : 50 to 1250 RPM
- Working Area of Base : 870 x 600
- Spindle center to column : 460
- Max. travel of spindle : 260
- Max. dist. spindle nose to table : 630
- Max. dist. spindle nose to base : 230-900
- Spindle nose Bore Fitting : M.T.5
- Table : 625 x 465
- Diameter to Ram : 90
- Size of Base : 760 x 1290 x 190
- Diameter of column : 165
- Total height of the machine : 2240
- Drill Head Motor : 3HP, 960 RPM
- RPM : 1 HP, 1440 RPM
- Lifting Motor Vee Belt : A 23
- Gross Weight : 1200Kgs.
- Net weight : 970 Kgs.
- No. Of Auto Feed
1) 0.05
2) 0.10
3) 0.15.

Offering Pillar Type Drilling Machine.

JAY brand Drilling machine having Rigid Ribs which provides Extra Rigidity and vibration free operation to machine.

It has 110mm Column Dia. and 78mm Ram Dia. Drilling Cap. in M.S.40mm

• Spindle made up with EN-8 Steel and rolls on Taper Bearings upper and lower side.
• Gears are made up with Graded Steel which provide Silent drilling operation and also durability.
• Extra Ribs in Head and Base place of the machine which provides Rigidity to machine.

Our Product Ranges: Pillar Type Drilling machines, Radial Drilling machines, Milling Cum Drilling Cum Tapping machines, Baby Magnetic Drilling machines, Flex Arm Tapping machine.

Offering Milling Cum Drilling Machine.

Offer JAY brand Drilling cum milling cum tapping machine, 3 in 1 machine.Having Longitudinal Travel upto 455 and Cross travel 380.

• Both Slides travels on Rigid Base Slide which provides high accuracy and vibration free operation.
• DRO provides exact location of the job where you wish to drill, tap or mill.
• we Provides Threaded spindle with safety nut which protect chuck or mill cutter to detach from spindle.
• Gears Made up of Graded Steel which provides SILENT operation.
• Hardened RAM and PINION for smooth and rigid operation.
• Machine made up by Centrifugal Cast Iron.

Offering double column radial drilling machine :
Description dc ? 410 drilling in mild steel 42 (1 5/8?) drilling in cast iron 50 rough boring in mild steel 60 tapping in mild steel 25 spindle taper mt-4 / mt-5 spindle travel 225 spindle speed (rpm x steps) 12 steps 60, 90, 115, 165, 200, 290, 340, 480, 575, 825, 1005, 1510 diameter of ram (quill) 78 no. of spindle auto feed ranges (mm/rev) 6 steps 0.1, 0.15, 0.20, 0.27, 0.33, 0.52 max / min distance spindle nose to base 1225 /450 vertical travel of arm 775 max / min distance spindle center to 1025 / 275 column horizontal travel of arm 750 max drilling radius 1137 machine measurement (l x b x h ) 1600 x 850 x 2270 diameter of column 225 work table 500 x 450 x 400 coolant tank 770 x 430 x 145 50 liters drill head motor 2 hp(1.5 kw) 960/1440 rpm elevating motor 0.75 hp(0.56 kw) 960 rpm.

-We are offering Tapping Drilling Machine with following features :
-Drilling capacity : 40 mm
-Pillar diameter : 170 mm
-Spindle nose to table distance : 705 mm
-Distance from spindle nose to base distance : 995 mm
-Distance from spindle center to pillar surface : 790 mm (max)
-Taper in spindle mt
-4-Number of speed : 8
-Speed Range of Speed (rpm) : 70 to 2000
-Work Table Size (in mm) : 380x300x300
-Base size (Machined Area) : 735 x 1240 mm
-Overall Base Size : 745 x 1260 mm
-Spindle Travel : 215 mm
-Pillar Length : 1490 mm
-Overall height with pulley guard : 1960 mm
-V-Belt section b :
-45" & a-24"
-Weight (Approx.) : 800 Kgs.
-Motor : 1440 rpm
-3 Phase 440 volts : 1.5 hp & 0.5 hp
-Shipping Wooden Case Inner Size L x W x H (in mm) : 1300 x 940 x 2100.

Manufacturer of pillar type drilling machines, radial drilling machines, milling cum drilling machines, tapping machines and bench drilling machines.