We offer a range of emulsifiers and industrial cutting oil used for industrial purpose. Our range included :
Cutting Emulsifier Oil
This is a versatile high performance Cutting Emulsifier Oil. This is general purpose emulsifier. Which is soluble in lubricating base stock.
Approximately 18-20 % emulsifier is mixed in a suitable oil as per application need, however for best performance napthenic oil is preferable which would give better emulsion for longer duration. Required quantity of oil to be added in water with vigorous stirring. This gives stable emulsion (Normally 5 to 10 % Emulsion is used). Meets IS - 1115 - 1986 Specification. Specifications:
Orchard Spray Emulsifier Oil is emulsifier oil blended from high quality base oils and specially selected additives. The oil has an excellent wetting property and is compatible with most of the insecticides. Also the oil does not have any toxic influence on the surroundings.
Application:
Orchard spray oil is used in the form of oil-in-water (recommended dosage is 2 to 4 % of oil in water) and the emulsion is sprayed to control different type of insects. The oil is specially recommended for the protection of apple trees from San Jose scale. Performance Level:
It has unique property of easy emulsification and remains uniform over a wide range of temperature. The emulsion dissolves the waxy protective shield of the insect and cuts off air supply by forming an envelop of oil film.
1. PHYSICAL AND CHEMICAL PROPERTIES of TBN Booster - 300 TBN
This is a brownish red liquid and non-toxic. The flash point is 190. It can react with strong oxidants. SPECIFICATIONS
CHARACTER
LIMITS
TYPICAL
CALCIUM CONTENT %WT
2.8 – 3.0
2.9
SULFAR % WT
2.6 – 3.7
3.2
TOTAL BASE NUMBER
25 – 30
29
SOAP CONTENT
38 – 42
40
OIL CONTENT % WT
60
52
FLASH POINT COC ° C
200
>200
COLOR ASTM DD
4.5
--
WATER CONTENT, MAX
0.5
0.23
VISCOSITY @ 100° C, cSt
45
57
APPLICATIONS:-
The product TBN Booster - 300 TBN has the advantages of excellent neutralization power & high temperature detergency and rust preventive property. It can be mainly used for blending high and medium grade lubricating oil used in internal combustion engines, marines and the engines which use fuel with high sulfur content so that lacquer and carbon residue deposits accumulated in the combustion chamber of the engines are not only greatly reduced, but also the cleanliness of the pistons can be maintained.
Corrosion to the engine parts by acidic matters also can be prevented and its service time can be prolonged. Better compounding synergistic effect can be obtained with the addition of ashless dispersant, anti-oxidant and corrosion inhibitor. The quantity of the product to be added into lubricating oil is from 1.5% to 3.0% in formulating engine oil and 5 to 10 % in formulating Marine engine oils.
© Jay Aar Enterprises. All Rights Reserved (Terms of Use)
