Oil Additives

We are offering Oil Additives. These oil additives are recommended for long lasting and high performance.

Gear Oil Additives

It has been specially formulated to give excellent antiwear and extreme pressure properties along with thermal, oxidation and rust characteristics (covering copper and copper alloys) to cover a broad range of applications of gear oil applications. Gear Oil Additives (EP) should be blended with highly refined base stocks to meet API GL4, GL5, GL2 and IS 8406 (1993) when blended in suitable base stock & desired viscosity grades.

Performance:

Lubricants formulated with this additive package work for heavy duty enclosed gear drives with splash and circulatory type lubrication systems under heavy shock load conditions. It also gives dependable performance for continuous service at operating temperature upto 160 °C. Our Gear Oil Additives (EP) is also useful for antifriction bearings subjected to heavy shock loads.

Specifications	Typical Values
Color	Amber liquid
Viscosity @ 100 oC., cSt., min	7
Flash Point, COC oC, min.	110
Sp. Gravity @ 27 oC	0.91
Nitrogen Content %, min	1
Sulphur content % wt., min	22
Phosphorus % wt., min	0.8

Dosage: To formulate suitable grades in group i base oils.

API GL 4 (AUTOMOTIVE GEAR OIL)            2.0
API GL 5 (AUTOMOTIVE GEAR OIL)            4.0
IS   8406 (INDUSTRIAL GEAR OIL)            1.5

Send Enquiry

Hydraulic Oil Additives

Hydraulic oil Additives (Multipurpose Antiwear ) -

Hydraulic Oil Additives has been formulated to give excellent hydraulic fluid characteristics to cover a broad range of applications. The product should be blended with highly refined base stocks to achieve the following desired results.

Specifications	Typical Values
Color	Amber liquid
Viscosity @ 100 oC.,cSt	12
Flash Point, COC oC, min	115
Sp. Gravity @ 27 oC	0.95
Chemical reactivity with other gases	Inert
Zinc Content WT %	4.3

Performance: By adding 0.75 to 1.0 % w/w in ISO VG grades of oils the following performance results are obtained:

Note: Additionally 100 – 300 ppm of defoamer could be added to meet the foaming characteristics.

MEETS FOLLOWING INTERNATIONAL SPECIFICATIONS:

DIN 51524 P II; BIS 10522; US STEEL 127; CINCINNATI P68, P69, P70 ETC.

Send Enquiry

Heavy Duty Engine Oil Additives

It has been designed for formulating heavy duty diesel engine lubricants meeting API CD/CF (Multigrades and Monogrades) performance levels.

Performance Package
Performance Level	API CF ( 9 TBN)
Treat Rate % wt.	6
Viscosity Index Improver	Non Dispersant V.I. Improver
Base Stocks	Group I base oils
SAE Viscosity Grades	15W-40, 20W-40, 20W-50, 10W, 20W, 30W, 30, 40, 50

Engine Test containing 6.00 % wt E.O.A. in group I base oils and Non Dispersant V.I. Improvers is characterized by excellent piston deposits control and low bearing weight loss in CRC L – 38. DI package can be used in following treat rates to achieve the following credentials.

API Performance	SAE Grades	Dosage % w/w	Base oils used
API CD	Multigrade	5.5	Group I
API CD	Monograde	5.25	Group I
API CC	Multi/Monograde	3	Group I
API CB	Monograde	2.7	Group I

Multigrade: SAE 15W-40, 20W-40, 20W-50.
Monogrades: SAE 20W, 30, 40, 50

Typical Properties: s been designed for formulating heavy duty diesel engine lubricants / Engine Oil Additives meeting API CD/CF (Multigrades and Monogrades) performance levels.

Performance Package
Performance Level	API CF ( 9 TBN)
Treat Rate % wt.	6
Viscosity Index Improver	Non Dispersant V.I. Improver
Base Stocks	Group I base oils
SAE Viscosity Grades	15W-40, 20W-40, 20W-50, 10W, 20W, 30W, 30, 40, 50

API Performance	SAE Grades	Dosage % w/w	Base oils used
API CD	Multigrade	5.5	Group I
API CD	Monograde	5.25	Group I
API CC	Multi/Monograde	3	Group I
API CB	Monograde	2.7	Group I

Multigrade: SAE 15W-40, 20W-40, 20W-50.
Monogrades: SAE 20W, 30, 40, 50

Typical Properties:

Specification	Typical values	Test Method
Density @ 25 °C, gm/cm3	1	ASTM D 4052
Flash Point °C (PM), min	170	ASTM D 92
Viscosity at 100 °C, cSt.	75	ASTM D 445
Total Base Number (TBN)	145	ASTMD 2896