JAYAM Electronics
JAYAM Electronics




Home

Profile

Products

Contact Us



Showcase Gallery

Home » Products » Experimental Kits


Experimental Kits

  • Microprocessor and Microcontroller kit’s
  • VLSI Trainer kit’s
  • Embedded Trainer kit’s
  • Digital Electronics kit’s
  • Power Electronics kit’s
  • Measurement and Instruments kit’s
  • Electronic Devices trainer kits
  • Communication Engineering kits
  • Control of Electrical Machines Lab kits
  • Industrial Electronics kits 
  • Digital IC Trainer kits

Experimental Kits
16 Characters LCD Interface Board


16 Characters LCD Interface Board

  • 4x4 Matrix 16 Key Keyboard
  • LCD Display of 2 lines and 16 Characters / line
  • Closed wooden cabinet





DC Motor Interface Board

  • Speed control circuit using PWM technique and Small DC motor
  • Duty cycle input and H Bridge output for driving DC Motor
  • Control switches to give control inputs (direction and speed)
  • Closed wooden cabinet



DC Motor Interface Board




Lift Control Interface


Lift Control Interface

  • 3 floors (Ground plus two floors) Plastic model
  • Floor request switches and Floor sensing switches
  • Cabin - stepper motor with controller with forward and reverse control
  • Proper termination to wire inputs and outputs 





VLSI Kit Model: VLSI-200

SPARTAN3 (XC3S200-TQ144) 200,000-gates, Up to 97 user-defined I/O signals,

            Memory: 2MB – PROM, Clock: 24MHz crystal

            Write simple VHDL Codes for

 

                Addition, Subtraction, Multiplication, Division and implement on FPGA kit, 8 Bit Digital output using LED’s, 8 Bit Digital inputs using Toggle switches, Relay interface, Buzzer interface, 4×4 Matrix Keyboard interface, 7 Segment LED display interface, LCD display to display a text message, Write a VHDL code & implement on FPGA kit for MUX & DEMUX, Write a VHDL Program & implement on FPGA kit for Encoder Decoder & Shift



VLSI Kit Model: VLSI-200




VLSI Kit Model: VLSI-500


VLSI Kit Model: VLSI-500

XILINX Spartan-3E FPGA (XC3S500E-TQP208) 500,000-gates

            Up to 120 user-defined I/O signals

            Memory: 2MB – PROM

            Clock: 24MHz crystal Oscillator

            2X16 LCD

            6 Nos. 7Segment Display

            4X4 Matrix Key

            16 Nos. Input switch With Indicator

            8 Nos. Output states LED

            Built in Power supply

 

            Write simple VHDL Codes for

 

                Addition, Subtraction, Multiplication, Division and implement on FPGA kit, 8 Bit Digital output using LED’s, 8 Bit Digital inputs using Toggle switches, Relay interface, Buzzer interface, 4x4 Matrix keyboard interface, RTC interface, Stepper Motor interface, DC Motor interface, Write a VHDL code & implement on FPGA kit for MUX & DEMUX, Write a VHDL Program & implement on, FPGA kit for Encoder Decoder & Shift





VHDL Code

  • Vhdl Code For Stepper Motor Interface Kit
  • Half and full step can be controlled
  • Connect 8051 Micro controller kit
  • ½ kg PMDC motor
  • Clock wise and anti clock wise rotation can be controlled
  • Speed can be controlled by this controller 



VHDL Code




Traffic Light Control Interface Kit


Traffic Light Control Interface Kit

  • Square traffic light display signal controller
  • East, west, north, south post are defined on the PCB for the square
  • For each post four LEDs are provided in form of Red, Yellow and Green 





LCD Display To Display A Text Message Kit

  • 16 x 2 LCD Display
  • Two 16 rows alphanumeric characters
  • Backlight display 



LCD Display To Display A Text Message Kit




ARM Controller Kit Model: ARM1210


ARM Controller Kit Model: ARM1210

  • LPC 2148 controller / 32 bit Microcontroller
  • 512kb Flash
  • USB Communication
  • UART Communication
  • JTAG Communication
  • External EPROM 64K
  • 10 bit ADC & DAC
  • PWM
  • Buzzer, Relay
  • Low power Real Time Clock (RTC)
  • USB cable
 
  • LCD module
  • 7 segment display module
  • Digital Input
  • Digital Output module
  • 4 x 4 matrix module
  • I²C interface module
  • Inbuilt Power Supply 





Arm Controller Mother Board

  • RS232 for serial communication
  • LPC 2148 controller
  • 16/32 bit microcontroller
  • 10 bit ADC & DAC
  • 512kb flash
  • Low power Real Time Clock (RTC)
  • Serial - USB cable 



Arm Controller Mother Board




Arm Controller With LCD Module


Arm Controller With LCD Module

  • 2X16 character
  • 8 Digital inputs
  • PWM signal with X-on time and Y-off time
  • 10-bit ADC with 10 turn potentiometer
  • Serial - USB cable
  • In-built Power Supply 





Arm Controller With 7 Segment Module

  • 7-segment LED display (multiplexed x 4)
  • 8 Digital inputs
  • Serial - USB cable
  • In-built Power Supply 



Arm Controller With 7 Segment Module




Arm Controller With IO Module


Arm Controller With IO Module

  • 8 Digital inputs
  • 8 Digital outputs
  • Relay interface (DPDT)
  • Buzzer interface
  • Serial - USB cable
  • In-built Power Supply 





Arm Controller With Graphical LCD Module

  • 128 x 64E graphical LCD
  • Interfacing with temperature sensor
  • Serial - USB cable
  • In-built Power Supply 



Arm Controller With Graphical LCD Module




Arm Controller With 4 X 4 Matrix Module


Arm Controller With 4 X 4 Matrix Module

  • 16 Digital inputs
  • 10 Digital outputs
  • Serial - USB cable
  • In-built Power Supply 





Arm Controller With Stepper Motor Interface Module

  • 7.5° step rotation
  • Speed indicator (LED)
  • Serial - USB cable
  • In-built Power Supply 



Arm Controller With Stepper Motor Interface Module




Line Synchronized, Ramp And Pedestal UJT Trigger Circuit


Line Synchronized, Ramp And Pedestal UJT Trigger Circuit

Line Synchronized, Ramp And Pedestal UJT Trigger Circuit With Ac Load Experiment Trainer Kit

  • Power supply : 0-18V AC, 0-24V AC
  • Pulse Transformer 1 No.
  • 2Nos. of  SCR for Power Circuit 





Full Controlled Bridge With R Load Experiment Trainer Kit

  • Single Phase Half And Full Controlled Bridge With R Load Experiment Trainer Kit
  • Power supply : 0-24V AC / 2A, 0-±12V DC
  • Inbuilt firing circuit
  • Inbuilt power circuit
  • Inbuilt R Load
  • 4Nos. of  SCR, 2Nos. of power diode
  • 1No. fly wheel diode
  • Patching for Half & Full control bridge



Full Controlled Bridge With R Load Experiment Trainer Kit




Triac Experiment Trainer Kit


Triac Experiment Trainer Kit

Lamp Control Circuit Using Diac And Triac Experiment Trainer Kit

  • Inbuilt 110V AC
  • Variable control circuit
  • Inbuilt 40W Lamp 





SCR Commutation Circuit Kit

  • Power supply : 0-24V DC/1A, 0-26V/1A, 0-24V AC
  • 6 type of SCR Commutation
  • SCR Firing Circuit inbuilt
  • Wood Box (Closed Type)
  • Input : 230V, AC  



SCR Commutation Circuit Kit




Basic Series Inverter Experiment Trainer Kit


Basic Series Inverter Experiment Trainer Kit

  • Input 24V DC, 2A
  • Firing circuit & Power circuit inbuilt
  • R Load Inbuilt
  • Inbuilt Power Circuit 





Mosfet And IGBT Experiment Trainer Kit

  • Single Phase Parallel Inverter Using Mosfet And IGBT Experiment Trainer Kit
  • Input 24V DC, 2A
  • Output Voltage 24V AC, 50VA
  • Output Frequency 50Hz to 100Hz
  • Overload production 



Mosfet And IGBT Experiment Trainer Kit




Control Circuit Using Thyristor Experiment Trainer


Control Circuit Using Thyristor Experiment Trainer

DC Chopper Control Circuit Using Thyristor Experiment Trainer Kit

  • Power supply 0-24V DC/2A, ±12V
  • Variable PWM Generator
  • Inbuilt R Load 





Single Phase To Single Phase Cycloconverter Trainer

Single Phase To Single Phase Cycloconverter Experiment Trainer Kit

  • Power supply  ±12V
  • Isolation Transformer 230/24-0-24V
  • 4Nos. of SCR with Heat sink
  • Inbuilt R Load
  • Inbuilt firing circuit
  • 1No. 1P 6way rotary switch for select the frequency



Single Phase To Single Phase Cycloconverter Trainer




Universal Motor Control Circuit Using Triac Experiment Trainer Kit


Universal Motor Control Circuit Using Triac Experiment Trainer Kit

  • Power supply : 0-24V AC
  • Firing Circuit using UJT
  • Isolation Transformer 230/110V
  • Pulse Transformer 1No.





Single Phase AC Motor Experiment Trainer Kit

Closed Loop Speed Control Of Single Phase AC Motor Experiment Trainer Kit

  • Power supply : 0-230V AC
  • Inbuilt firing circuit
  • Inbuilt power circuit



Single Phase AC Motor Experiment Trainer Kit




DC Shunt Motor Controlcircuit Experiment Trainer Kit


DC Shunt Motor Controlcircuit Experiment Trainer Kit

  • Power supply : 0-24V AC / 2A
  • Inbuilt firing circuit
  • Inbuilt power circuit
  • 4Nos SCR using bridge rectifier 





Speed Control Of AC Motor Kit

  • Isolation Step down Transformer 230V / 110V AC
  • Control circuit using Triac BT137F
  • Firing circuit using pulse Transformer
  • Universal AC Motor 1kg.
  • Closed type wood box



Speed Control Of AC Motor Kit




Closed Loop Speed Control Of DC Motor Kit


Closed Loop Speed Control Of DC Motor Kit

  • Speed control of SCR trigger circuit
  • Sync and Ramp Generator
  • Frequency to Voltage converter circuit
  • Control circuit using SCR
  • Closed type wood box





Mosfet Based PWM Chopper Kit

  • PWM Generation inbuilt
  • Variable Frequency 
  • Step down
  • Input 24V DC
  • Output 5V DC
 
  • Step up
  • Input 12 to 15V DC
  • Output 24V DC



Mosfet Based PWM Chopper Kit




MOSFET/IGBT Experiment Trainer Kit


MOSFET/IGBT Experiment Trainer Kit

Single Phase Sinusoidal PWM Inverter Using MOSFET/IGBT Experiment Trainer Kit

  • +24V DC power source
  • IGBT based inverter
  • Single pulse / sinusoidal mode selector
  • Gate trigger pulse control
  • Sine frequency, square frequency and amplitude control
  • RL output load





SMPS Using Mosfet Experiment Trainer Kit

  • Power supply : 0-24V AC / 2A
  • Inbuilt firing circuit
  • Inbuilt power circuit
  • Inbuilt variable load Resister



SMPS Using Mosfet Experiment Trainer Kit




Full Bridge Converter Experiment Trainer Kit


Full Bridge Converter Experiment Trainer Kit

  • Three Phase Half Bridge / Full Bridge  Converter Experiment Trainer Kit
  • Power supply : 230/24V AC three isolated transformers
  • Star connected transformers output
  • 3Φ full/half controlled circuit module with R load
  • Firing pulse control with phase angle adjustment
  • Inbuilt R Load
  • 6Nos. of  SCR
  • Patching for Half & Full control bridge





Verifying Superposition Theorem Trainer Kit

  • Power Supply inbuilt
  • Superposition theorem Net work Circuit
  • Closed Wood Box



Verifying Superposition Theorem Trainer Kit




Verifying Thevinens Theorem Trainer Kit


Verifying Thevinens Theorem Trainer Kit

  • Power Supply inbuilt
  • Thevinen’s  theorem Net work Circuit
  • Closed Wood Box





Verifying Nortons Theorem Kit

  • Power Supply inbuilt
  • Norton’s Net work Circuit
  • Closed Wood Box



Verifying Nortons Theorem Kit




Verifying Maximum Power Transfer Theorem Kit


Verifying Maximum Power Transfer Theorem Kit

  • Power Supply inbuilt
  • Closed Wood Box 





Wheatstone Bridge Kit

  • Input 230V
  • Power supply ±5V 500mA
  • Digital meter In build
  • Measuring Range 10 Ω to 10K Ω
  • Closed type Wooden box            



Wheatstone Bridge Kit




Schering Bridge Kit - AC Bridge


Schering Bridge Kit - AC Bridge

  • Measuring Range 0.001mf - 2mf
  • Sensitivity +0.1mf
  • Tolerance ±5%
  • Source 1Khz sine wave
  • Speaker 1No.               
  • Closed type Wooden box            

 





Andersons Bridge Kit

  • Measuring Range 100mH - 300mH
  • Sensitivity ±5%
  • Source 1Khz sine wave
  • Speaker 1No.
  • Closed type Wooden box            



Andersons Bridge Kit




Earth Tester Kit


Earth Tester Kit

Earth Tester (3 Terminal) hand driven generator type,

Dual Range : 0-10-100W with Testing Kit containing

a) M.S. Spikes 45cm long -3 nos

b) Roll of flexible wire on spool -3 Nos

c) Hammer -1 No

d) Plier -1 No

e) Screw Driver -1 No

f) Carrying bag -1 No

Model : CIE/222M, “CIE” Make.

 (Detailed specifications as per catalog enclosed)

 





Wein Bridge Oscillator Kit Using OP-AMP

  • WEIN Bridge Network
  • Power Supply +15V
  • Variable Capacitor
  • Feedback amplifier using Op 741
  • Closed wooden box
  • Input 230V AC



Wein Bridge Oscillator Kit Using OP-AMP




RLC  Bridge Kit


RLC Bridge Kit

  • Measure the unknown RLC
  • Power Supply ±15V
  • 1KHz sine wave generator

 

Measuring Range:

  • R  :  10  to 10K
  • C  :  0.1nf to 10 mfd
  • I   :  100 mH to 350 mH





Variable Differential Transformer

LVDT Characteristics K Linear Variable Differential Transformer

  • LVDT Sensor with 0 - 20mm
  • Displacement ±10mm
  • Output Voltage 0 - 2V               
  • Output Display 3 ½ digit 7 segment LED display
  • Closed type Wooden box            



Variable Differential Transformer




Load Cell Trainer To Measure Weight


Load Cell Trainer To Measure Weight

  • Load Cell sensor 5Kg
  • Signal conditioner 2V
  • Output Display 3 ½ digit 7 segment LED display
  • Closed type Wooden box   
  • Input 230V, AC  





Strain Measurement Using Strain Gauge

  • Strain Gauge sensor 1Kg
  • Signal conditioner 2V
  • Output Display 3 ½ digit 7 segment LED display
  • Closed type Wooden box 
  • Input 230V / AC  



Strain Measurement Using Strain Gauge




Temperature Measurement Trainer Using Thermocouple


Temperature Measurement Trainer Using Thermocouple

  • Thermocouple J Type
  • Measurement 0-100C
  • Electric kettle 1 No.
  • Thermometer 0-110C
  • Power supply Inbuilt  
  • Closed type Wooden box     
  • Output display 3 ½ digit panel meter 
  • Input 230V / AC  





Temperature Measurement Trainer Using RTD

  • Measurement 0-100C
  • Electric kettle 1 No.
  • Thermometer 0-110C
  • Inbuilt power supply
  • Closed type Wooden box       
  • Output display 3 ½ digit panel meter 
  • Input 230V / AC  



Temperature Measurement Trainer Using RTD




Temperature Measurement Trainer Using Thermister


Temperature Measurement Trainer Using Thermister

  • Thermister 10K
  • Measurement 0-100C
  • Electric kettle 1 No.
  • Thermometer 0-110C
  • Inbuilt power supply
  • Closed type Wooden box  





Verification Of Ohms Law And Of Kirchoffs Current

Verification Of Ohms Law And Of Kirchoffs Current And Voltage Law

  • Power Supply Inbuilt
  • Cabinet Closed type Wooden box            



Verification Of Ohms Law And Of Kirchoffs Current




Bourdon Pressure Transducer With Foot Pump


Bourdon Pressure Transducer With Foot Pump

  • 1 No. Foot Pump
  • 1No Bourdon Tube with LVDT Sensor
  • Sin wave frequency 1 KHz
  • Pressure measurement trainer





Maxwells Inductance - Capacitance Bridge Kit

  • ±5V,/500mA DC Power Supply
  • AF Signal generator
  • Maxwell bridge with variable arm resister value selection
  • Audio amplifier & Loud speaker output
  •  Patch cards
  • Wood Box (Closed Type)



Maxwells Inductance - Capacitance Bridge Kit




Kelvin Double Bridge


Kelvin Double Bridge

  • +5V,/500mA DC Power Supply
  • Kelvin double bridge
  • Variable arm resister value selection
  • Patch cards
  • Wood Box (Closed Type)





Operational Amplifier Trainer Kit

  • +5VDC Power Supply
  • +5V variable power source 2 Nos.
  • Adder, sub tractor, inverter, Non inverter modes of circuits (IC 741)
  • Patch cards
  • Wood Box (Closed Type)
 



Operational Amplifier Trainer Kit




High Pass Filter, Low Pass Filter - Active And Pass Filter


High Pass Filter, Low Pass Filter - Active And Pass Filter

  • Power Supply ±15V
  • Variable sine wave generator (10H to 10KHz)
  • Independent circuit for Active & Passive filter
  • Wood Box (Closed Type)
  • Input : 230V, AC  





Amplitude Modulation & Demodulation Kit

  • Using Transistor
  • Carrier Signal Generator - Sine 100KHz
  • Demodulation using Diode and Transistor
  • Wood Box (Closed Type)
  • Input : 230V, AC 
 



Amplitude Modulation & Demodulation Kit




Super Heterodyne Receiver Kit


Super Heterodyne Receiver Kit

M.W. Transistor Radio Receiver Dynamic Demonstrator kit

 

  • Mixer section using Transistor and Local Oscillator
  • IF Amplifier section using IFT
  • Detector section using Diode
  • Amplifier Section using TBA810
  • Different testing points
  • Fault providing facility   
  • Wood Box (Closed Type)
  • Input : 230V, AC  





FM Modulator & Demodulator Kit

(Frequency Modulator)

 

  • Power supply : ±12, ±5V
  • Signal Generator using IC XR2206
  • Carrier signal Generator - 100KHz
  • Modulating signal Generator - 100Hz
  • Demodulation using IC LM565(PLL)
  • Wood Box (Closed Type)
  • Input : 230V, AC  



FM Modulator & Demodulator Kit




FM Transmitter Trainer Kit


FM Transmitter Trainer Kit

  • Carrier signal Generator
  • Modulating - Externally Input provision
  • Wood Box (Closed Type)
  • Input : 230V, AC  





FM Receiver Trainer Kit

  • Receiver section
  • Modulation signal output
  • Detector Section
  • Message output
  • Wood Box (Closed Type)
  • Input 230V / AC  



FM Receiver Trainer Kit




PLL Oscillator Kit ( Phase Locked Loop)


PLL Oscillator Kit ( Phase Locked Loop)

[Test points to measure VCO frequency, Lock range,

Capture range should be provided]

 

  • Power supply : ±12, ±5V
  • Variable sine wave generator using XR 2206
  • PLL Circuit using NE 565
  • Variable VCO frequency
  • Wood Box (Closed Type)
  • Input : 230V, AC  





PAM Generation And Detection Kit

(Pulse Amplitude Modulation)

 

  • Power supply : ±5V
  • Carrier Signal Generator - Clock 8KHz
  • Modulating Signal Generator - Sine 1KHz, Variable amplitude
  • Independent circuit for modulation & demodulation
  • Wood Box (Closed Type)
  • Input : 230V, AC  



PAM Generation And Detection Kit




PWM Generation & Detection Kit


PWM Generation & Detection Kit

(Pulse Width Modulation)

 

  • Power supply : ±5V
  • Carrier Signal Generator - Clock 8KHz
  • Modulating Signal Generator - Sine 1KHz, Variable amplitude
  • Independent circuit for modulation & demodulation
  • Wood Box (Closed Type)
  • Input : 230V, AC  





PPM Generation And Detection Kit

  • Power supply : ±5V
  • Carrier Signal Generator - Clock 8KHz
  • Modulating Signal Generator - Sine 1KHz, Variable amplitude
  • Independent circuit for modulation & demodulation
  • Wood Box (Closed Type)
  • Input : 230V, AC  



PPM Generation And Detection Kit




PCM Transmitter & Receiver Kit


PCM Transmitter & Receiver Kit

PCM Transmitter & Receiver Kit (Pulse Code Modulation)

[Test points to observe and measure the outputs at relevant locations should be provided]

 

  • Power supply : -5V
  • Convention Clock Generator - 100KHz
  • Variable sine wave generator 100Hz to 500Hz
  • Variable power supply (-5-0-+5V)
  • Inbuilt PCM Modulation & Demodulation circuit
  • Wood Box (Closed Type)
  • Input : 230V, AC  





Three Way Cross Over Network Kit

  • Tweeter 8Ω
  • Mid range 8 Ω
  • Woofer 8 Ω
  • Closed wood box



Three Way Cross Over Network Kit




Delta Modulation And Demodulation Kit


Delta Modulation And Demodulation Kit

  • ±12V, +5/500 DC Power Supply
  • Signal generator with variable amplitude
  • Synchronous clock generator
  • Delta modulator
  • Delta demodulator
  • Patch cards
  • Wood Box (Closed Type)





Line Coding And Decoding Kit

  • +5V DC Power Supply
  • Delta clock generator
  • Delta generator with 8 bit selective switch
  • Channel encoder
  • Channel decoder
  • Patch cards
  • Wood Box (Closed Type)



Line Coding And Decoding Kit




Video Amplifier Kit


Video Amplifier Kit

  • Power supply inbuilt 
  • 12VDC and 110VDC 
  • Video signal externally input 
  • Amplifier transistor using 2229 
  • Closed wood box 
  • Input AC230V





Sync Separator Kit

  • Output Vertical sync and Horizontal sync 
  • Power supply inbuilt (12V/500mA) 
  • Closed wood box 
  • Input AC230V



Sync Separator Kit




Sample And Hold Circuit Kit


Sample And Hold Circuit Kit

  • Carrier signal Generator - Clock pulse 1KHz to 10KHz Variable
  • Sampling signal - Sine 500Hz
  • MOSFET based & IC based circuit
  • Power supply inbuilt (±15V/500mA, ±5V/500mA)
  • Closed wood box
  • Input AC230V





Phase Shift Keying Trainer Kit - PSK

  • Modulation and Demodulation
  • Carrier Signal Generator - Sine 10KHz
  • Data generator - Using decade counter 7490
  • Power supply inbuilt (±5V/500mA)
  • Closed wood box
  • Input AC230V



Phase Shift Keying Trainer Kit - PSK




Fiber Optic Analog Link


Fiber Optic Analog Link

  • Transmitter & Receiver
  • Fiber optic cable - 1 meter - 1 No.
  • Fiber optic cable - 3 meter - 1 No.
  • Signal source inbuilt
  • Power supply inbuilt
  • Closed wood box
  • Input AC230V





Fiber Optic Digital Link Kit

  • Transmitter and Receiver
  • Built in clock Generator
  • Fiber optic cable 1 meter - 1No.
  • Power supply inbuilt
  • Closed wood box
  • Input AC230V



Fiber Optic Digital Link Kit




TDM Trainer Kit


TDM Trainer Kit

  • Digital Time Division Multiplexing and De-multiplexing
  • 8 Bit data generator 
  • Clock and address generator
  • 8:1 Multiplexer
  • 1:8 De-multiplexer
  • Power supply inbuilt (±12V/500mA, +5V/500mA)
  • Input AC230V
  • Closed wood box 





Analog Transmitter And Receiver Kit

  • Carrier AM Variable Frequency  
  • Modulating signal externally input
  • Power supply inbuilt
  • Closed wood box
  • Input AC230V



Analog Transmitter And Receiver Kit




Frequency Shift Keying Trainer Kit - FSK


Frequency Shift Keying Trainer Kit - FSK

  • Transmitter and Receiver
  • Clock Generator - 10KHz
  • Data Generator - 4 different data’s
  • FSK Modulation using IC 7400
  • FSK Demodulation included 
  • Power supply inbuilt
  • Closed wood box  (±5V/500mA)
  • Input AC230V





ASK Modulation And Demodulation Kit

  • Amplitude Shift Keying Modulation and Demodulation
  • Carrier Signal Generator - Sine 10KHz
  • Data Generator - 4 different data inputs
  • Power supply inbuilt (±5V/500mA)
  • Closed wood box
  • Input AC230V



ASK Modulation And Demodulation Kit




PWM Generation And Detection Kit


PWM Generation And Detection Kit

  • Pulse Width Modulation
  • Carrier Signal Generator - Clock 8KHz
  • Modulating Signal Generator - Sine 1KHz, Variable amplitude
  • Power supply inbuilt (±5V/500mA)
  • Closed wood box
  • Input AC230V





PM Trainer Kit

  • Pulse Modulation 
  • Carrier Signal Generator - Clock 8KHz
  • Modulating Signal Generator - Sine 1KHz, Variable amplitude
  • Power supply inbuilt (±5V/500mA)
  • Closed wood box
  • Input AC230V



PM Trainer Kit




Color TV Demonstration Kit


Color TV Demonstration Kit

To observe and measure the output at various points in Sound section, video section, picture tube deflection Section

  • Input 230VAC
  • Test Points 14 Nos.
  • Fault Switches 14 Nos.
  • Meter Digital Voltmeter 1 No.
  • Power Supply 0-5V Variable Output.
  • Closed type metal cabinet





Tape Recorder Demonstration Kit

  • Pre Amp output test point
  • Power Amplifier output test point
  • Fault creating switches
  • Voltage and frequency test points
  • Mechanical section
  • Pre Amplifier section
  • Audio Amplifier section



Tape Recorder Demonstration Kit




DVD Player Demonstration Kit


DVD Player Demonstration Kit

  • Pre Amp output test point
  • Power Amplifier output test point
  • Fault creating switches
  • Voltage and frequency test points
  • Mechanical section
  • Pre Amplifier section
  • Audio Amplifier section





Telegraph Transmitter And Receiver Kit

  • Morse code switch
  • AF Oscillator 1KHz
  • VHF Oscillator
  • Class C driver and Amplifier
  • Receiver section
  • FM Receiver
  • LCD display



Telegraph Transmitter And Receiver Kit




QPSK Trainer Kit


QPSK Trainer Kit

  • ±5V/500mA DC Power Supply
  • System clock generator
  • Delta clock generator & Delta generator
  • QPSK modulator & demodulator
  • Phone detector
  • Bit pair detector
  • Patch cards
  • Wood Box (Closed Type)





Digital Modulation And Demodulation Kit

 

 

  • ASK modulator & demodulator
  • PSK modulator & demodulator
  • FSK modulator & demodulator
  • ±5V, 15V/500mA DC Power Supply
  • Carrier signal output
  • Data signal output
  • Data signal with 8 bit selective switch
  • Patch cards
  • Wood Box (Closed Type)

 

 



Digital Modulation And Demodulation Kit




Inverting And Non Inverting Amplifier Kit - Using OP-AMP


Inverting And Non Inverting Amplifier Kit - Using OP-AMP

  • Power supply : ±15V
  • Independent circuit for inverting and Non inverting amplifier
  • Dual variable power source : 0 - 5V
  • Inbuilt variable AC Source
  • Wood Box (Closed Type) 
  • Input : 230V, AC  





Summing Amplifier, Difference Amplifier Kit

  • Power supply : ±15V
  • Independent circuit for Summing and Differential amplifier
  • Dual variable power source : 0 - 5V
  •  Inbuilt variable AC Source
  • Input : 230V, AC  



Summing Amplifier, Difference Amplifier Kit




Integrator And Differentiator Kit


Integrator And Differentiator Kit

  • Power supply : ±15V, +5V
  • Inbuilt Variable Square wave generator
  • Independent circuit for integrator and differentiator 
  • Input : 230V, AC  





Astable And Monostable Multi Vibrator Kit

  • Using IC 555
  • Single pulse Switch 5V
  • Input 230VAC / 50Hz
  • DC 5V



Astable And Monostable Multi Vibrator Kit




IC Voltage Regulated Power Supplys


IC Voltage Regulated Power Supplys

  • Bridge Rectifies Circuit
  • Fixed Voltage Regulator (7805, 7812, 7905, 7912)
  • Variable Voltage Regulator (LM 317)
  • Filter circuit
  • Input : 230V, AC  





Multiplexer And De- Multiplexer Kit

  • Power supply : ±5V
  • Using CMOS 4051
  • 8 analog inputs & outputs
  • Input Signal generator (Sine, Square and Triangle)
  • Address input manually and Clock generator
  • Input : 230V, AC  



Multiplexer And De- Multiplexer Kit




Single Digit Counter Kit


Single Digit Counter Kit

  • Power supply : +5V
  • Using 7490, 7475, 7447 & seven segment Display
  • Input mono pulse provided
  • Clock generator - 1Hz to 10Hz continually variable
  • Input : 230V, AC  





Shift Register - Digital Data Generator Kit

Using parallel to serial shift register IC 74165 and retrieving the serial data to parallel output using IC 74164

 

  • Power supply : +5V
  • Inbuilt clock, data clock, bite clock generator
  • 8 Nos. of logic inputs
  • 8 Nos. of logic outputs
  • Input : 230V, AC  



Shift Register - Digital Data Generator Kit




Digital To Analog Converter Kit - DAC R-2R


Digital To Analog Converter Kit - DAC R-2R

Binary weighted register network Using R-2R Network

 

  • Power supply : ±15V, +5V
  • Digital input 5V
  • Independent circuits for weighted and R-2R Network
  • Logic input 4 Numbers
  • Input : 230V, AC  





Analog To Digital Converter IC 0808 Trainer Kit - ADC

Dual Slope Integration Type Analog To Digital Converter IC 0808 Trainer Kit - ADC

  • Power supply : +5V
  • Analog Input - 0-5V
  • Clock Generator 100KHz
  • 8 Nos. of digital outputs LED indicators
  • Input : 230V, AC  



Analog To Digital Converter IC 0808 Trainer Kit - ADC




Dual Slope Integration Type Digital To Analog Converter


Dual Slope Integration Type Digital To Analog Converter

Dual Slope Integration Type Digital To Analog Converter (IC 0808) Trainer Kit - Dac

  • Power supply : ±5V
  • 8 Nos. of digital inputs with indicators
  • Input : 230V, AC  





Logic Trainer Kit

  • AND, OR, NOT, NAND, NOR and EX-OR
  • Power supply : +5V
  • 4 Nos. of logic input switches with indicators
  • Output status indicators
  • Input : 230V, AC  



Logic Trainer Kit




Half Adder And Full Adder Kit


Half Adder And Full Adder Kit

  • Power supply : +5V
  • 4 Nos. of logic input switches with indicators
  • Independent circuit for half adder & full adder
  • Output status indicators
  • Input : 230V, AC  





Half Subtractor And Full Subtractor Kit

  • Power supply : +5V
  • 4 Nos. of logic input switches with indicators
  • Independent circuit for half sub tractor & full sub tracktor
  • Output status indicators
  • Input 230V / AC  



Half Subtractor And Full Subtractor Kit




Verification Of Decoder And Encoder Kit


Verification Of Decoder And Encoder Kit

  • Power supply : +5V
  • 8 Nos. Logic input, 3 Nos. output with LED indicator
  • Using 74148
  • 3 Nos. of logic input switch
  • 8 Nos. of logic outputs with indicators
  • Input : 230V, AC  





Parity Generator And Checker Kit

  • Parity Generator and Checker IC 7486
  • Logic input Switch 10 Nos.
  • Output states indicating LED 10 Nos.
  • DC 5V Fixed Regulated output
  • Input 230VAC / 50Hz
  • Closed type wood box 



Parity Generator And Checker Kit




Verification Of D T And JK Fillip Flop Kit


Verification Of D T And JK Fillip Flop Kit

  • Power supply : 5V/1A
  • 2 Nos. of Logic input switches with indicator
  • Sine wave generator
  • Mono pulse using 74121
  • 6Nos. of output status indicator
  • Input : 230V, AC  





4 Bit Ripple Counter Kit

  • Power supply : 5V
  • Two Nos. logic input switches with indicator
  • Clock Generator
  • Mono Pulse using 74121
  • Ripple circuit using 7473
  • 1 No. Reset switch
  • 4 Nos. of output status indicator 
  • Input : 230V, AC  



4 Bit Ripple Counter Kit




Universal IC Tester


Universal IC Tester

  • Digital ICs upto 40 pins and linear ICs upto 20 pins in dual in line
  • (Also round pack if inserted after bending leads for DIP compatibility) 
  • 20 pin DIP ZIF Socket and 40 Pin DIP Universal ZIF Socket
  • Microprocessor (8085 / 8086 / 8088 / Z80 / 6502),
  • Peripheral ICs, EPROMs RAMs, 74/54, 40/45, 93/96 Series ICs
  • Operational amplifiers, comparators, transistor arrays opt couplers, analog switches voltage followers, timers, A to D converters, D to A converters and other selected special function analog ICs
  • LCD dot matrix display
  • 24 feather touch Keyboard
  • Supply Voltage 230V ±10% 50Hz AC





SCR Phase Control Characteristics Kit

  • Power supply : 0-24V AC
  • 230/12-0-12V Isolation Transformer
  • 2Nos. of SCR for half, full AC Control circuit
  • Inbuilt Loading Resistive & firing circuit
  • Ramp & Pedestal Method
  • Zero crossing detector method
  • Wood Box (Closed Type)
  • Input : 230V, AC  



SCR Phase Control Characteristics Kit




Single Phase Series Inverter Kit


Single Phase Series Inverter Kit

  • Input 24V DC, 2A
  • Firing circuit & Power circuit Inbuilt
  • R Load Inbuilt
  • Wood Box (Closed Type)
  • Input 230V / AC  





Multiple Pulse Sine Wave Inverter Kit

  • Input Sin wave (50Hz to 100Hz)
  • Triangle 10KHz to 20 KHz (Variable Amplitude)
  • Single Pulse & Multiple Pulse 4nos of isolated gate pulse 4nos of IGBT for H Bridge
  • Firing Circuit & Power circuit Inbuilt
  • R Load Inbuilt
  • Wood Box (Closed Type)
  • Input 230V / AC  



Multiple Pulse Sine Wave Inverter Kit




IC Based PWM Buck Converter Kit


IC Based PWM Buck Converter Kit

  • Input 20 to 24V DC
  • Output 5V DC @ 1A
  • Fuse for output side with overload protection
  • Variable Load inbuilt





PLC Trainer Kit

  • Power supply : 24V/2A
  • 6 Nos. of logic input
  • 4 Nos. of Logic output
  • 4 Nos. Relay for PLC output
  • Serial communication cable for easy to download the programs from PC to kit
  • Out LED indicator
  • Wood Box (Closed Type)
  • Input : 230V, AC  



PLC Trainer Kit




Conveyor Interfacing Control Module - Using PLC


Conveyor Interfacing Control Module - Using PLC

 

  • Forward and Reverse option
  • Proximatri sensor
  • On Off Switch
  • Mattel insulated body
  • Compact Motor
  • Controlled PLC Microcontroller 

 





PLC Trainer Kit

  • 1761-L10BWB model
  • Micrologix 1000 series
  • 6 digital inputs and 4 digital outputs
  • External relay based outputs
  • +24V and +5V Power supplies
  • RS Logix 500 Professional Programming software
  • RS Linx Communication Software
  • RS 232 Communication cable from PLC to system
  • Switch inputs and LED indication for simulating the inputs
  • LED indication in the outputs
  • Buzzer output
  • Proper termination of inputs, outputs and Power supplies
  • Wooden casing and detailed manual 



PLC Trainer Kit




Timing Characteristics Of Thermal Overload Relay Kit


Timing Characteristics Of Thermal Overload Relay Kit

  • One No. 3 Phase, 16A Main Contactor
  • One No. 2-4.5A Overload relay
  • Provision to connect 3 phase load externally
  • (The Institute should Provide the Load)
  • One stop watch
  • 3 Phase input, Fuses
  • Screen Printed Board, MS tube stands, Acrylic back cover 





Control Circuit

Control Circuit For Jogging In Cage Motor Kit

  • The output power matching for 3 HP Cage Motor
  • 1 No. 3 phase 16A Contactor, 1 No. of Control relay
  • 3 Phase input proper termination
  • Stop, Start and Jog Push Buttons, Fuses and Power Terminations
  • Control wiring termination, Powder Coated MS Stands, Acrylic back cover  



Control Circuit




Control Circuit


Control Circuit

Control Circuit For Semi - Automatic Star-delta Starter Kit

  • Output power suitable for 5 HP Motor
  • 3 Nos. 3 phase 16A Main Contactor, 8A Overload relay
  • Start and Stop Push Buttons, Fuses and Power wiring termination
  • Control wiring termination, Powder Coated MS Stands, Acrylic back cover





Control Circuit

Control Circuit For Automatic Star-Delta Starter Kit

  • Output power suitable for 5 HP Motor
  • 3 Nos. 3 phase 16A Main Contactor, 8A Overload relay
  • 1 No ON delay Timer
  • Start and Stop Push Buttons, Fuses and Power wiring termination
  • Control wiring termination, Powder Coated MS Stands, Acrylic back cover



Control Circuit




Control Circuit


Control Circuit

Control Circuit For Dynamic Braking Of Cage Motor Kit

  • Output power suitable for 5 HP Motor
  • 2 Nos. 3 phase 16A Main Contactor, 8A Overload relay
  • 1 No OFF Delay Timer
  • Start and Stop Push Buttons, Fuses and Power wiring termination
  • Control wiring termination, Powder Coated MS Stands, Acrylic back cover





Control Circuit

Control Circuit For Two Speed Pole Changing Motor Kit

  • 2 Nos. of 3 Phase 16A Main Contactors
  • 3 Phase input, Fuses
  • Speed 1, Speed 2 and Stop Push Switches
  • Provision to connect two different pole 3 phase windings
  • Screen Printed Board, MS tube stands, Acrylic back cover 



Control Circuit




Control Circuit


Control Circuit

Control Circuit For Automatic Rotor Resistance Starter Kit

  • Output power suitable for 5 HP Motor
  • 4 Nos. 3 phase 16A Main Contactor, 8A Overload relay
  • 3 Nos. 3Ph Resister
  • Start and Stop Push Buttons, Fuses and Power wiring termination
  • Control wiring termination, Powder Coated MS Stands, Acrylic back cover





Speed Control Of 3HP DC Motor Kit - Using SCR

  • The output power matching for 3HP DC Motor
  • Single Phase Input
  • Rectifier and DC input to field winding
  • Phase angle control circuit
  • Variable DC Power circuit 



Speed Control Of 3HP DC Motor Kit - Using SCR




Single Phase Preventer Kit


Single Phase Preventer Kit

  • 1 No. 3 Phase 16A Main Contactor
  • 2 Transformers and 2 relays to deduct the phase failure
  • 3 switches to test the phase failure
  • Proper termination for 3 HP cage motor
  • Screen Printed Board, MS tube stands, Acrylic back cover 





PLC Based Dol Starter Kit - Without PLC

  • Output power suitable for 3 HP Motor
  • 16A, 3 phase Main contactor, 6A Overload relay
  • Start and Stop Push Buttons, Fuses and Power wiring termination
  • Control wiring termination, Powder Coated MS Stands, Acrylic Back cover 



PLC Based Dol Starter Kit - Without PLC




PLC Based Star Delta Starter Kit - Without PLC


PLC Based Star Delta Starter Kit - Without PLC

  • Output power suitable for 5 HP Motor
  • 1 No. 3 phase 16A Main Contactor, 8A Overload relay
  • Start and Stop Push Buttons, Fuses and Power wiring termination
  • Control wiring termination, Powder Coated MS Stands, Acrylic back cover 





PLC Based Control Circuit

PLC Based Control Circuit For Jogging And Forward - Reverse Operation Kit - Without PLC

  • 2 Nos. of 3 Phase 16A Main contactors
  • 3 phase input, Fuses
  • Stop, Start Fwd, Jog Fwd, Start Rev, Jog Rev Push Switches
  • Inputs for PLC, Control from outputs of PLC
  • Proper termination for 3 HP cage motor
  • Screen Printed Board, MS tube stands, Acrylic back cover



PLC Based Control Circuit




PLC Based Single Phase Preventer Kit - Without PLC


PLC Based Single Phase Preventer Kit - Without PLC

  • 1 No. 3 Phase 16A Main Contactor
  • 3 transformers and associated circuits as input to the PLC
  • PLC output as control output
  • 3 switchers to test the phase failure
  • Proper termination for 3 HP cage motor
  • Screen Printed Board, MS tube stands, Acrylic back cover 





VI Characteristics Of PN Junction Trainer Kit

  • Regulated Power Supply (0 – 10V)
  • Forward & Reversed Bias Circuit’s Using Diode IN4007
  • Wood Box (Closed Type)  



VI Characteristics Of PN Junction Trainer Kit




V-I Characteristics Of Zener Diode Trainer Kit


V-I Characteristics Of Zener Diode Trainer Kit

  • Regulated Power Supply (0 – 10V)
  • Forward & Reversed Bias Circuit’s Using Zenar Diode 5.6V
  • Wood Box (Closed Type)  





Half Wave, Full Wave And Bridge Rectifier With

  • 1Phase Isolation Transformer
  • Primary 230V
  • Secondary (15 – 0 – 15)V
  • Diode Circuit Using Diode IN 4007
  • Filter Circuit
  • Wood Box (Closed Type)



Half Wave, Full Wave And Bridge Rectifier With




V-I Characteristics Of Voltage Regulator Trainer Kit


V-I Characteristics Of Voltage Regulator Trainer Kit

  • Bridge Rectifies Circuit
  • Fixed Voltage Regulator (7805, 7812, 7905, 7912)
  • Variable Voltage Regulator (LM 317)
  • Filter circuit
  • Input : 230V, AC  





Common Emitter Configuration Trainer Kit

  • Power Supply +15V
  • Amplifier Circuit Using BC 108 With Load
  • Wood Box (Closed Type)



Common Emitter Configuration Trainer Kit




RC Coupled Amplifier Trainer Kit


RC Coupled Amplifier Trainer Kit

  • Power Supply +12V
  • 2 Stage RC Coupled Amplifier With Load
  • Wood Box (Closed Type) 





Emitter Follower Kit - Common Collector Amplifier

  • Power Supply ±8V
  • Amplifier Circuit Using BC 108 With Load
  • Wood Box (Closed Type)



Emitter Follower Kit - Common Collector Amplifier




Negative Feedback Amplifier Kit


Negative Feedback Amplifier Kit

  • Power Supply +12V
  • Negative Feed Back Amplifier Using BC 108
  • Wood Box (Closed Type)





RC Phase Shift Oscillator Kit

  • Power Supply +15V
  • RC Phase Shift Network
  • Feed Back Amplifier Circuit Using BC 108
  • Wood Box (Closed Type)



RC Phase Shift Oscillator Kit




Hartley And Colpitts Oscillator


Hartley And Colpitts Oscillator

  • Power Supply +12V
  • Hartley Network
  • Colpitts Network
  • Amplifier Circuit Using BC 108
  • Wood Box (Closed Type)
  • Input : 230V, AC  





JFET Characteristics Kit

  • Variable Power supply : 0-18V
  • Variable Power supply : (-5v to +5V)
  • JFET Characteristics Circuit Using BFW 10
  • Wood Box (Closed Type)
  • Input : 230V, AC  



JFET Characteristics Kit




Common Source Amplifier Kit


Common Source Amplifier Kit

  • Power Supply +12V
  • Common Source Amplifier Circuit Using BFW 10
  • Wood Box (Closed Type)
  • Input : 230V, AC  





UJT Characteristics Kit

  • Dual Regulated Power Supply (0 – 18) V
  • UJT Characteristics Circuit Using 2N2646
  • Wood Box (Closed Type)
  • Input : 230V, AC  



UJT Characteristics Kit




UJT Relaxation Oscillator Kit


UJT Relaxation Oscillator Kit

  • Power Supply +12V
  • UJT Relaxation Oscillator Circuit Using 2N2646
  • Wood Box (Closed Type)
  • Variable frequency 
  • Input : 230V, AC  





V- I Characteristics Of SCR Trainer Kit

  • Dual Regulated Power Supply (0 – 36) V,(0-18)V
  • Characteristics of Circuit Using SCR TYN 616
  • Wood Box (Closed Type)
  • Input : 230V, AC  



V- I Characteristics Of SCR Trainer Kit




V- I Characteristics Of Traic Trainer Kit


V- I Characteristics Of Traic Trainer Kit

  • Dual Regulated Power Supply (0 – 18) V
  • Characteristics of Circuit Using Traic
  • Wood Box (Closed Type)
  • Input : 230V, AC  





V-I Characteristics Of Diac Trainer Kit

  • Dual Regulated Power Supply (0 – 45) V
  • Characteristics of Circuit Using DIAC
  • Wood Box (Closed Type)
  • Input : 230V, AC  



V-I Characteristics Of Diac Trainer Kit




Clipper And Clamper Experiment Trainer Kit


Clipper And Clamper Experiment Trainer Kit

  • Power Supply ±15V
  • Clipper Circuit Using 741 OP-Amp
  • Clamper Circuit Using 741 OP-Amp
  • Wood Box (Closed Type)
  • +ve  and –ve clipping
  • +ve and –ve clamping
  • Input : 230V, AC  





Photo Diode, Photo Transistor And LDR Characteristics Kit

  • Regulated Power Supply (0 – 30) V
  • 0-230V Variable ac power supply with lamp (Light Dimmers Circuit)
  • Photo Electronic Device Characteristics Circuit
  • Wood Box (Closed Type)
  • Input : 230V, AC  



Photo Diode, Photo Transistor And LDR Characteristics Kit




OPTO Coupler Characteristics Kit


OPTO Coupler Characteristics Kit

  • Dual Regulated Power Supply (0 – 18) V
  • Characteristics of Opto Coupled Circuit Using P 621
  • Wood Box (Closed Type)
  • Input : 230V, AC  





Solar Cell Characteristics Kit

Solar Cell Circuit With Load

Light Dimmer Circuit

Voltmeter

Wood Box (Closed Type)

Input : 230V, AC



Solar Cell Characteristics Kit




Characteristics Of  IGBT


Characteristics Of IGBT

  • 0-30V/500mA DC variable isolated power source 2nos.
  • IGBT characteristics circuit
  • Patch chords
  • Closed type wooden box





Calibration Of Single Phase Energy Meter

  • Single Phase Energy Meter 1 No.
  • 3KW Meter 1 No.
  • 10A Ammeter 1No.
  • 300V Voltmeter 1 No.
  • Load 1100W Lamp 6 decades 



Calibration Of Single Phase Energy Meter




Calibration Of Three Phase Energy Meter


Calibration Of Three Phase Energy Meter

  • Three Phase Energy Meter 1 No.
  • 3KW Meter 3 Nos.
  • 10A Ammeter 1No.
  • 500V Voltmeter 1 No.
  • Load 300W Lamp each phase 













Contact Us
JAYAM Electronics
Mr. Rajarajan A. / Mr. S. Sivanesan (Partner And Marketing Manager)
No. 12/21, 1st Main Road, Venkateshwara Nagar, Velachery
Chennai - 600042, Tamil Nadu, India

Contact via E-mail



Home  |  Profile  |  Products  |  Site Navigation  |  Contact Us

Member IndiaMART.com © JAYAM Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited