JBTP Series
Roller chains conforming to British standards. Attachments to JBTP standards. Ranging from 3/8" to 1" pitch. Other types & sizes available on request. Double pitch roller chains conforming to ANSI / BSS standards. Attachments to ANSI / BSS / JBTP standards. Range in all sizes. Omega series standard roller chains of ASA / ANSI / BS / ISO / DIN specifications, with higher wear resistance. Attachments as per ANSI / BS / ISO. Higher sizes also available on request.

We are manufacturer and exporter of different type of pulleys. Our range of pulleys include:
 

Taper Lock Pulley

Variable Speed Pulley

Timing Belt & Pulley

V-Belt Pulley

Flat Pulley

Mountings

We are manufacturing high quality anti vibration mountings which increases the speed of machines,keep proper alignment, leveling and reduce the vibration & increases the efficiency of the workers & reduce down the cost of manufacturing.

We manufacture various coupligs such as spider & snap wrap jaw couplings, hy flex - tyre flex jaw couplings, gear-flex couplings, jaw-flex couplings, B-flex/ cone-flex couplings, flange/spacer couplings, disc-O-flex / d-flex couplings.

Pinion Gears
Forged 42CRMo4, 34CRiMo6, 30CRiMo8 duly hardened and tempered to 260-280 BHN, specialise in designing heavy loads in sugar, cement, mines etc Increase power density through higher hardeness pinions. Utilize tooth modifications system in gearing to improve service life of pinions.

Worm Gear
sugar crystallizer worm wheel teeth = 65 module = 24 face width = 165

We are manufacturing high quality anti vibration mountings which increases the speed of machines, keep proper alignment, leveling and reduce the vibration & increases the efficiency of the workers & reduce down the cost of manufacturing.

We are manufacturing agricultural chain such as
 

Double-Pitch Roller Chain

Agricultural Roller Chain S 3

Agricultural Roller Chain S 45

Agricultural Roller Chain S 52

Agricultural Roller Chain S 55

Agricultural Roller Chain CA 550

Agricultural Roller Chain CA 2060

Agricultural Roller Chain P 41.3

Hollow Bearing Pin Chain

Drive chains are being manufactured in steel which are in the following material

Standard Roller
BS / DIN / ISO chains conforming to BS228 / DIN 8187 / ISO R 606 / IS 2403-1975 ranging from 6mm to 88.9 mm pitch. ASA / DIN / ISO /ANSI chains conforming to ASA / DIN 8188 / ISO R 606 / IS 2403-1975 ranging from 6 mm to 88.9 mm pitch. Also available 'ANSI heavy series chains'.

Doble Pitch
Chains conforming to ANSI B29.4 & BS specifications, ranging from 1/2" to 1 1/4" extended pitches. Special sizes can also be provided. straight contour / figure "8" contour available. Large rollers can be provided.

Diamond Super
Chains conforming to standard roller chains specifications with higher strengths on the parts / chain.

TIDC Standards
Chains not conforming to standard specifications, ranging from 6 mm to 7/8" pitch.

Plated Chains
Chains with nickel, zinc and other plating supplied on request.

BL Series
Chains conforming to ANSI B29.8 M - 1993 standards, ranging from 1/2" to 2" pitch in different lacing patterns.

TI Series
Non-standard leaf chains, ranging from 3/8" to 1.5" pitch in different lacing patterns. Other sizes / lacing patterns are also available.

AL Series
Conforming to ISO 4347 - 1985 standard, ranging from 1/2" to 2" pitch in different lacing patterns.

LL Series
Conforming to ISO 4347 - 1985 standard, ranging from 1/2" to 2" pitch in different lacing patterns.

Chains conforming to API 7F specifications for oilfield application, ranging from 1/2" to 2.5" pitch : upto 10 strands.

Stainless Steel
British standard roller chains with stainless steel parts. Double pitch chains and leaf chains are also available. Ranges from 3/8" to 1" now. Other sizes upon request.

'DO' Heavy Duty
Offset link chains used for construction equipment. Ranges from 1 3/4" to 6" pitch.

Flat Card
Chains for carding applications. Available in all sizes for all carding machines. Omega standard roller chains to ASA / BS specifications with high wear resistance. Available upon request in all sizes.

Bush
All roller chains without rollers. Available in sizes from 3/8" to 3.5" pitch. Straight sided plate chains roller chains can be with straight contour plates. Ranging from 3/8" to 3 1/2" pitch.

STEEL LIGHT DUTY
BS / ISO / DIN / IS /AS / ANSI
Attachment chains with K1, K2, M1, M2, K0, M0 attachments available in outer plates. Ranging from 3/8" to 1" pitch. Other types & sizes available on request.

JBTP Series
Roller chains conforming to British standards. Attachments to JBTP standards. Ranging from 3/8" to 1" pitch. Other types & sizes available on request.

Double Pitch
Roller chains conforming to ANSI / BSS standards. Attachments to ANSI / BSS / JBTP standards. Range in all sizes.

Omega Series
Standard roller chains of ASA / ANSI / BS / ISO / DIN specifications, with higher wear resistance. Attachments as per ANSI / BS / ISO. Higher sizes also available on request.