Electro-Polishing Solution

Ultra-Shine Electro Polishing Plant is a special Machine which increases your productivity with reduction in cost and improvement in quality.

The casted tree's are directly dipped in this solution, after cleaning the powder on it. In few seconds, the surface of the pieces will become smooth and the pieces will be polished. 85% of your filling and 70% of your pre-polishing work will be done in few seconds, without any actual metal loss.

Key Features:
1) Common plant for Gold, Silver and Brass.
2) Gives 99.9% Metal recovery from the bath.
3) Reduces filling work up to 90%
4) Reduces polishing work up to 65%
5) Enhances shine on the metal and diamond area.
6) Gives very smooth surface finishing.
7) Casted piece is polished in just 4 Minutes.
8) Does not harm stones.
9) Even the inner most surface is polished.

ULTRA-SHINE GEP 18 Reduces your Gold Loss up to 85% And Increase your Productivity up to 65%.

ULTRA-SHINE GEP-18 (Gold Electro Polishing Solution) is a special product which does 85% of your Filling and 60% of your polishing work in few seconds.

The casted tree's are directly dipped in this solution after removal of powder on it. In few seconds, the surface of the pieces will become smooth and the pieces will be polished.

Key Features:
1) It’s a Non Cyanide Based solution.
2) Gives 99.9% Gold recovery from the bath.
3) Gives very smooth surface finishing.
4) Casted Tree is polished in just 4-5 Minutes.
5) Does not harm diamonds.
6) No special machine required.
7) Even the inner most surface is polished.
8) Can be used for all the karate gold.
9) Common liquid for white as well as yellow Gold.

Technicals:
Electro-polishing of Gold involves passage of electric current through a Gold piece (Anode), while it is submerged in a specially-designed ULTRA-SHINE GEP-18 solution. The process is essentially the reverse of electroplating. In that, the surface of the Gold piece is actually stripped away.
When used on Gold and gold alloys, the process removes Gold, Copper, Silver, Nickel, Palladium, (as well as non metallic’s) from the surface. Thus, it also enhances the corrosion resistance of the Gold surface.

ULTRA-SHINE SSP 925 (Silver Electro Polishing Solution) is a special product which increases your productivity with reduction in cost.

The casted Tree's are directly dipped in this solution, after cleaning of powder from it. In few seconds, the surface of the pieces will become smooth and the pieces will be polished.

Key Features:
1) It’s a Cyanide Free solution.
2) Gives 99.9% Silver recovery from the bath.
3) Enhances shine on the metal and diamond area.
4) Gives very smooth surface finishing.
5) Casted piece is polished in just 4 Minutes.
6) Does not harm stones.
7) No special machine required.
8) Even the inner most surface is polished.

Technical’s:
Electro-polishing of Silver involves passage of electric current through a silver piece (Anode), while it is submerged in a specially-designed ULTRA-SHINE SSP 925 solution. The process is essentially the reverse of electroplating. In that, the surface of the Silver piece is actually stripped away.
When used on silver and silver alloys, the process removes Silver, copper, Nickel, Palladium, zinc, as well as non metallic’s from the surface. Thus, it also enhances the corrosion resistance of the Silver surface.