Jhunsons Chemicals

Inhouse Moulding activity is carried out as a further integration in the process of manufacturing. We undertake injection moulding in our premises and have moulded world class products. These are being exported to the world markets and have been acclaimed as very good. We use both our PVC Compounds as well any other plastic polymer to do the moulding on our machines.

Until now we have done moulding using NYLON. PVC Compounds, POLYPROPELENE, HIGH IMPACT POLYSTYRENE, LOW & HIGH DENSITY POLYETHYLENE. Not only to this injection moulding we impart know how on the other kinds of moulding as explained below.

Plastisols are used for manufacturing of wide range of products as rainboots, hand gloves, upholstery fabrics and tanks, small moulded parts, drum lining, strippable vinyl coating, crown caps lining, electrical insulation filters & covering of electroplating jigs and hangers and for decoration.

Plastisol is a physical mixture of vinyl resins and compatible plasticizers. Unlike most fluid materials they consist of 100 % solids and do not require the evaporation of solvents or water. Fusion at elevated temperatures drives the plasticizer into the resin and changes the plastisol into a homogeneous solid plastic material with the same excellent physical properties commonly associated with other vinyls - flexibility, toughness, abrassion and chemical resistance, unlimited colour possibilities and excellent resistance to aging. The STORAGE of plastisol should not exceed 27 °C (room temp). It should be stored away from the all sources of heat & avoid direct sunlight also
.
To obtain the maximum physical properties plastisol must be fused at a temperature of180-200°C. It is important that the entire mass reach the fusion temperature. The plastisol is heated in various types of heating ovens. The most common of them is an air circulating oven.

The granuals are in-house development of Jhunsons Chemicals. We have been successful in replacing the PVC Compound from Japan by our own PVC Compound in Indian industry, thus saving valuable foreign currency for the country. This is a result of commitment of people of Jhunsons for development and excellence. The granuals are manufactured by state of the art extrusion machines.

• Extruded Item
• PVC Compound – Granuals
• Depending on the use there are various grade