J & J Engineering, India


Products We Offer





Home » Products We Offer » Plummer Blocks

Plummer Blocks

Creating a niche of Plummer Blocks such as SN Series Plummer Blocks, SNH Plummer Blocks, SNL Plummer Block Housings, SD Series Plummer Blocks, BND & SBDS Series Plummer Blocks, SNA Series Plummer Blocks and many more items at its best, with utmost quality.



SN Series Plummer Blocks

SN Series Plummer Blocks


Our range of SN Series Plummer Blocks used as Flange Blocks is extensively used by the customers. The width of bearing seat in the SN series plummer blocks is such that it gives bearings axial freedom. A locating bearing is positioned by the insertion of one or two locating rings as the case may be for its axial location. SN Series plummer Blocks are suitable for Grease lubrication. Felt strips and Grease Nipples can be supplied along with plummer blocks on order. For dust prone areas SN Series plummer blocks can be supplied with horizontal metal labyrinth seals.

 

Features:

 

  • Best suited for moderate loads & speed
  • Maintains clean and temperate environment
  • Corrosion resistance
  • Durable







SNH Plummer Blocks

We are a known manufacturer, supplier and exporter of SNH series plummer blocks. These are horizontally split and are fully interchangeable with those of earlier SN and SNA series Plummer Blocks.

All features of standard and special shaft seals can be interchanged with 500 and 600 series for bearing with tapered bore and adapter mounting or with (straight) cylindrical bore etc. These are available in SNH series plummer blocks also. Its favorable cross section and improved design has resulted in greater strength as compound to SN or SNA series Plummer Blocks.

SNH plummer blocks have dowel pins at their mating surface to ensure correct assembly of base and cap. The bases and caps are not interchangeable. Like SNA series, the Plummer Blocks of SNH series are also supplied with standard shaft seals e.g., Felt seals {TC} or V Rings (TA)or V Ring on one end and end cover on other end (ATA). Special shaft seals such as labyrinth seals (TS) or double lip seals (TG) and taconite seals (ND) can also be supplied against orders

 


T
echnical Specifications:

Series Suitable for Bearing Series 
snh 500   1200ek, 2200ek, 22200 ek bearing with adapter sleeves.  
snh 600   1300ek, 2300ek, 21300 ek , 22300ek bearing with adapter sleeves.
snh 200   
1200e, 2200e, 21300 e , 22300e bearing for straight (cylindrical) bore.
snh 300   1300e, 2300e, 21300 e , 22300e bearing for straight (cylindrical) bore.



SNH Plummer Blocks




SNL Plummer Block Housings

SNL Plummer Block Housings


SNL Plummer Block Housings used as Plummer Block Assembly are suitable for self aligning ball bearings, spherical roller bearings and CARB bearings for shaft dia 20 to 160 mm. These housings are split type with 2 elliptical holes in housing base and are suitable for grease or oil lubrication. For grease lubrication, a variety of seals such as felt seals (TC Type), labyrinth seals (TS Type), double Lip Seals (TG Type) or aconite seals (ND Type) can be used and for oil lubrication special type of seal (TURU type) is used. Principal dimensions are identical to SNA/SNH type housings and are interchangeable. SNL housings are available with 4 elliptical slots in the base designated as FSNL or 2 drilled holes in the base with suffix MS1 or 4 drilled holes in the base with suffix MS2. These housings can be used for located bearing by inserting Locating rings on either side of bearing.

Series Suitable for bearing series
SNL 500 1200ek, 2200ek, 22200 ek bearing with adapter sleeves.
SNL 600 1300ek, 2300ek, 21300 ek , 22300ek bearing with adapter.
SNL 200  
1200e, 2200e, 22300e bearing for straight (cylindrical) bore.
SNL 300 1300e, 2300e, 21300 e , 22300e bearing for straight (cylindrical) bore.





SD Series Plummer Blocks

SD series of plummer blocks we offer, is made of Grey Cast Iron Grade FG 200 of IS : 210, which can be made from SG Iron (SDD) or Cast steel Castings (SDT), also for heavier loads on order

SD series of plummer blocks is suitable for spherical roller bearings of series 231 K with adapter sleeves for shaft aid 150 mm to 300 mm, and same are designated as SD 31. Plummer blocks are suitable for bearings series 230 and are designated as SD 30. Similarly, SD 500 and SD 600 series plummer blocks are suitable for 22200 CK and 22300 CK series bearings respectively.

These Plummer Blocks are either supplied with triple seal type labyrinth collars on both ends and the plummer blocks housings are designated by suffix TS or with triples seal type labyrinth collar on one end and End cover on other end for end shaft, which are designated with suffix ATS. All Labyrinth seals are supplied with rubber "0" cords and alien grub screws which ensure that the seal rotates with the shaft.

All SD series plummer blocks are suitable for floating loose (L) bearings It can be held or fixed (F) by inserting suitable locating rings which are supplied on orders.





SD Series Plummer Blocks




BND & SBDS Series Plummer Blocks

BND & SBDS Series Plummer Blocks


The BND & SBDS Series Plummer Blocks as Flange Bearing Blocks offered by us are a one piece housing with side covers, labyrinth rings and split spring rings or with side covers and oil seals. These are noted as the main feature of BND / SBDS series plummer blocks. Our plummer blocks are having four bolt slots for foundation and two grease nipples for lubrication.

Specifications:

 

  • Design A: For shaft terminating inside the housing. End cover seals one end of the housing.
  • Design B: Both ends are open for through shaft






SNA Series Plummer Blocks

SNA Series Plummer Blocks used as Bearing Flange Housings bearing housings) that our organization offers is completely interchangeable with earlier SN type Plummer Blocks, concerning mainly to its center height, foundation bolt centres. Same bearing housings can be used for 500 and 600 series bearings having equal bearing outside diameter by changing its shaft seals, e.g. SNA 506 plummer blocks can be used as SNA 605 also where bearing O.D of 1206 K and 1305 K are equal e.g., 52 mm. Similarly, these can also be used for bearing with tapered bore mounted with adapter sleeve or bearing with (straight) cylindrical bore. However such Plummer Blocks are designated as SNA 500 and SNA 600 for bearings with adapter sleeves and SNA 200 & SNA 300 for bearings with cylindrical bores. Bearings seating width provides axial freedom which can be made axially located by insertion of suitable locating rings. Moreover, SNA plummer blocks are supplied with felt seals(designated and suffixed as TC) Rubber V Ring seals (TA) and One Ring and One end cover (ATA). These plummer blocks can also be supplied with Double lip seals (TG) or labyrinth seals (TS) on order.

 

 

Series Suitable for bearing series 
SNA 500   1200 k, 2200 k, 22200 ck bearing with adapter sleeves.
SNA 600   22200 cck bearing for straight (cylindrical) bore.



SNA Series Plummer Blocks




Triangular Flanged Series Plummer Blocks

Triangular Flanged Series Plummer Blocks


We are pleased to offer our customers Triangular Flanged Series Plummer Blocks as Bearing Flange Blocks from shaft dia 20mm to 60 mm & square type from shaft dia 65mm to 100mm. These products are intended for use with self aligning ball bearings of series 12K, 22K and SRB 222K series on adapter sleeve mountings. Our triangular flanged series plummer blocks are available for located or non located bearings and are made up of Cast Iron. The felt seals are used for sealing of shaft and are supplied with end cover as A type & for through shaft as "B" type. These are available as 7225(00) & F 500 series along with I-1200 (00) series, suitable for self aligning ball bearing with extended inner ring suitable for 11200 E type bearings.

 

Technical Specifications:

Series Suitable for Bearing Series
722500  
1200k, 2200k, 22200ek bearing with adapter sleeves.
i-120000 i1200 e bearing for straight (cylindrical) bore.





S Series Plummer Blocks

We offer our clients S' Series Plummer Blocks used as Flange Housings ranging from ¾" (20 mm) to 8" (200 mm) shaft size. These blocks are suitable for double row self aligning Ball/Roller bearings. The series S-500 is suitable for 1200 K, 2200 K, 22200 CK bearings and S-600 is appropriate for 1300 K, 2300 K and 22300 CK series bearings with adapter sleeves. Plummer Blocks of S200 and S300 can also be supplied for bearings with cylindrical (straight) bore for 1200, 2200, 22200 series and 1300, 2300, 22300 series bearings respectively.

 

Features:

 

  • High tensile strength
  • Corrosion resistant
  • Suitable for grease lubrication





S Series Plummer Blocks






Contact Us
J & J Engineering, India
Mr. Jignesh Dedhia / Mr. Bhai Lal Dedhia
No. 63, Road No. 5, Kathwada, G. I. D. C.
Ahmedabad - 382 415, Gujarat, India

Contact via E-mail

Home  |  Profile  |  Products We Offer   |  Site Navigation  |  Contact Us

Member IndiaMART.com © J & J Engineering, India. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited