We manufacture a range of low temperature silver alloy brazing fluxes, which are been made with the high quality raw material. The range is been given below:

Lomelt 50:

• Low temperature paste/powder flux with smooth and quick flow. Ideal for production & repair works. Suitable for torch brazing application.
• Appropriate filler metals: High silver content brazing alloys with cadmium.
• Working temperature range: 550°c to 800°c

Lomelt 55:

• A paste type flux with excellent heat resistance properties makes it most suitable for induction brazing application.
• Appropriate filler metals: High & medium silver content brazing alloys with & without cadmium, Ag-cu-ph brazing alloys.
• Working temperature range: 550°c to 850°c

Lomelt 57:

• A general purpose active paste flux. Recommended for nearly all brazing operation. Based on specification: American welding society (AWS) type. FB3-A
• Appropriate filler metals: High & medium silver content brazing alloys with & without cadmium, Ag-cu-ph brazing alloys, Cu-ph brazing alloys.
• Working temperature range: 565°c to 870°c

Lomelt 60:

• This is the powder type free flowing flux of the range and suitable for use on most metals capable of being brazed with silver bearing brazing alloys.
• Appropriate filler metals: High & medium silver content brazing alloys with & without cadmium.
• Working temperature: 550°C to 850°C

We also offer our clients the medium temperature silver alloy brazing fluxes in a wide range which has been briefly described below:

Oxiclean 600:

• A special purpose black paste flux having wide active range. It is specially designed for carbide tip tool & stainless steel fabrication. Based on specification: American welding society (AWS) type FB3-C
• Appropriate filler metals: High & medium content silver brazing alloys with and without cadmium, Ag-cu-ph, Cu-ph brazing alloys. Specially suited with silver brazing alloys containing manganese and nickel.
• Working temperature range: 565°c to 925°c

Oxiclean 650:

• A special purpose paste flux remains active under long heating cycles, Oxiclean 650 flux is highly active in dissolving refractory oxides and is therefore, especially effective on stainless steel, carbides and heat resistant alloys.
• Appropriate filler metals: High temperature cd free silver brazing alloys.
• Working temperature range: 650°C to 950°C

We also supply our clients the high temperature brazing fluxes, which we offer in a wide variety given below: Hitemp 750:

• A powder type free flowing flux for braze welding & brazing, most suitable on copper alloys, galvanized steel & carbides.
• Appropriate filler metals: Low fuming bronze, nickel bronze, manganese bronze and brass brazing alloys.
• Working temperature range: 800°c to 1000°c

Hitemp 800:

• A high temperature powder type gas welding flux. Most suitable on copper, copper alloys, mild & low alloy steel.
• Appropriate filler metals: Low fuming bronze, nickel bronze, nickel silver.
• Working temperature range: 750°c to 1000°c.

We also manufacture the soft soldering fluxes which are been used for soldering operation. Our range of soft soldering fluxes is as below:

S.S. Sol Flux:

A highly active liquid flux for soft soldering especially suitable for stainless steel and carbon steel. The flux may also be used on non ferrous alloys where there is a need for an active flux. The residues are corrosive and should be removed after soldering operation.

Plubsol Flux

A water soluble paste flux for use with lead free solders. Plubsol flux residue flushes away easily after soldering. It is recommended to use in soldering copper, brass and plumbing fittings.

We also offer the aluminium brazing and welding fluxes which are been enlisted below:

Albraze:

• A powder type active brazing flux having good capillary flow at low temperature.
• Appropriate filler metal: 12% Silicon aluminium brazing alloy.
• Working temperature range: 500°c to 625°c

Alweld:

• A powder type flux used with wide range of aluminium welding/brazing alloys.
• Appropriate filler metals: 12% si brazing alloy, 10% si brazing alloy, 8% si Cu brazing alloys, 5% si brazing alloy & pure aluminum for fusion welding.
• Working temperature range: 550°C to 675°C

Packaging Data: 250gm and 500gm unbreakable plastic jar.

Flux residual removal: After brazing, welding & soldering flux residue should be removed by wire brushing followed by warm water rinse.

Special formulation of Jo FLUX™ are available for aluminum bronze, cast iron, ceramic and titanium. We also formulated custom made fluxes to satisfy your needs.