JO FLUX

Lomelt 55 powder	General properties
A general purpose slight high temperature flux for use when brazing copper, bronzes, brasses, stainless & carbon steels, nickel & nickel alloys. Excellent wetting & heat resistance properties. Most suitable for production work with induction heating brazing. For application where a dry flux is required. Can be mixed with water to make a cream paste.	International standard : AWS FB3-F
	Activity range : 568°c - 850°c
	For use when brazing with BAg group with cadmium & cadmium free silver brazing alloys. To be used with torch & induction heating brazing.
	Activity : good	Life : good
Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended	Fluidity : good	Capillary: excellent
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,	Flux residues : corrosive

Lomelt 57 paste	General properties
A all purpose flux for universal uses brazing copper, bronzes, brasses, stainless & carbon steels, carbide, nickel & nickel alloys. Dissimilar metals in the above group can be easily brazed. Suitable for tight fit joints as well as loose fit joints for surface building and gap fillings.	International standard : EN 1045 FH 10
	Activity range : 550°c - 800°c
	For use when brazing with silver BAg group (30%-45%) & BCuP group brazing alloys. For torch, induction, furnace heating brazing.
	Activity : good	Life : good
Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended	Fluidity : good	Capillary: good
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,	Flux residues : corrosive

Lomelt 58 paste	General properties
A new generation smooth creamy flux used when brazing copper, bronzes, brasses, stainless & carbon steels, carbides, hard metals, nickel & nickel alloys. A highly concentrated flux is fully active at 600°c above and effective with liquids up to 870°c. Perfect wetting action on even heating without spattering or running.	International standard : AWS FB3-A
	Activity range : 500°c - 870°c
	For use when brazing with silver BAg group cadmium bearing, cadmium free & BCuP group brazing alloys. For torch, induction, furnace brazing application.
	Activity : good	Life : good
Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended	Fluidity : excellent	Capillary: excellent
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,	Flux residues : corrosive

Lomelt 60 paste	General properties
A special purpose flux used when brazing stainless & carbon steels, carbides, heat resistant alloys. Highly active in dissolving refectory oxide. Excellent wetting action. Promotes optimal alloy bonding. Suitable for tight fit joints as well as loose fit joints for surface building and gap fillings.	International standard : EN 1045 FH 10
	Activity range : 500°c - 800°c
	For use when brazing with high silver BAg group (30%-45%) & BCuP group brazing alloys. For torch & induction brazing.
	Activity : excellent	Life : good
Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended	Fluidity : good	Capillary: good
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,	Flux residues : corrosive

Lomelt 65 paste	General properties
A special purpose flux used when brazing copper, bronzes, brasses, stainless & carbon steels, nickel. Flux for medium to low silver content brazing alloys. A special composition flux for high volume production. Promotes optimal alloy bonding. High heat resistance.	International standard : EN 1045 FH 10
	Activity range : 570°c - 850°c
	For use when brazing with BAg (20% - 30%) silver group having liquids between 700°c to 825°c. for torch & induction brazing.
	Activity : good	Life : good
Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended	Fluidity : good	Capillary: excellent
Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0,	Flux residues : corrosive

We offer wide range of lomelt powder. jo flux series of silver brazing fluxes are formulated using a balance of chemical ingredients and antioxidents by chemical reactions and not only by mixing of different mineral salts amoung simplex and complex potassium fluorine & boron compounds.

Lomelt powder	General properties
A general purpose low melting flux for use when brazing copper, bronzes, brasses, stainless & carbon steels Its promotes excellent capillary & fluidity for tight fit joints. Excellent in hot rodding application. Can be mixed with water to make a paste.	International standard : EN 1045 FH 10
	Activity range : 450°c - 800°c
	for use when brazing with high silver BAg group (42%-50%) & BCuP group brazing alloys. For torch brazing application.
	Activity : medium	Life : short
Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended	Fluidity : excellent	Capillary: excellent
Standard packaging (kg) : 0.25, 0.5, 4.0, 10.0,	Flux residues : corrosive