Josts Engineering

Josts EJD/ERD version of electric pallet truck/stackers can handle two pallets of load up tp 1000 Kg simultaneously. Both pedestrian and stand-on versions are available. These are used to carry two pallets at a time and can almost double the efficiency of the warehousing operations. The bottom fork can lift the load to 125mm off the ground and the top fork can be used lifting upto2490mm.

Ideal of quick emptying and refilling of coolant at machine centres in factory premises. It comprises of a coolant tank of capacity 1400 litres mounted either on a three wheel electric jumbo platform truck or four wheel electric JOTRUK. The tank consists of two compartments of 700 litres each, one for receiving the used dirty coolant oil from the machine and the other for fresh coolant oil.The equipment comes with necessary controls with pump motor unit, suction and delivery valves for smooth and quick operations.

A specially engineered three wheel Jumbo electric platform truck with hydraulically operated dumper ideally used for collecting wastes , scraps, machined chips etc from the shop floor or machine centres which then can be ferried to dumping area where the driver can directly dump the material to the waste bin. Saves man power and time in clearing the wastes from the factory floor. The typical equipment comes with a carrying capacity of 23 cu.ft and 1000Kg maximum load. It can travel through and turn in narrow aisles of 2500mm

Josts also supply Pneumatic Sample Transfer System specifically designed for metallurgical industry for transporting the samples from the furnace location to the metallurgical laboratory. This system has been found to be extremely useful and highly efficient especially in large plants where the laboratory may be located at quite a distance and where there is a need to send the metallurgical samples to the laboratory very frequently. Special Sample carriers containing test samples slides through pneumatic conveying tube at high velocity of about 8-10mts/sec by means of compressed air.The Sample carriers can also be used for transmission of the sample analysis report in the same tube in the opposite direction. Necessary safety interlocks are provided to ensure that the tube is not fed with carriers simultaneously from both ends

Scissors lift mounted on modified three wheel Jumbo electric low level platform trucks .Typically can be used to lift loads up to 1000Kg to 1600mm height. The platform comes with a safety railing and a drive interlock switch ensures that the vehicle is prevented from moving when the scissor lift is under operation. It can be easily driven around in the factory premises.

Ideal for carrying and serving tea in large factory premises. The three wheel jumbo electric vehicle can carry tea up to 900 litres of tea and can be driven and turned in narrow aisle width of 2500 mm.