Power Press H-type, Power Press C-type, Shaper Machine, Hydraulic Shearing Machine

		Home		Introduction		We Manufacture		Contact Us		Enquiry

Precision Heavy Machinery

The company is among the top-notch manufacturers and exporters of an assortment of heavy machineries & machine tools. These products are precision engineered and are globally acknowledged for their efficient performance, easy operation and less maintenance. Used in almost all industries, our products are safely packaged and are assured to be delivered within the stipulated time frame. Our product array consists of following products:

Oil Country Lathes

Specifications
Width of Bed (mm)	450	500	500	500	500	650- 1625	650- 1625
Height of Centre (mm)	400	445	445	460	460	525-1400	525-1400
Spindle Hallow (mm)	80	90	90	105	115	130	130
Total Width of Gap (mm)	380	510	510	510	510	600	600
Gap in front of face plate (mm)	280	410	460	460	460	510	510
Swing over Saddle (mm)	600	660	660	690	690	760-2250	760-2250
Swing in Gap (mm)	1325	1525	1525	1575	1575	1675-3250	1675-3250
Admit between Centre (mm)	1600	2000	3000	3000	4000	5000	6000
Admit between Centre (mm)	55	60	65	65	65	65	70

Centre Lathe

MODEL	JP- L 66H	JP- L 86H	JP- L 100H	JP- L 120H	JP- L 160H	JP- L 200H
Length of Bed	6 1/2'	8 1/2'	10'	12'	16'	20'
Height of Centre	8/10 /12"	10/12 /14"	14/16 /18"	16/18 /20"	18/20 /22"	20/22 /24/26"
Width of Bed	10/12 /14"	12/14 /16"	16/18 /20"	18/20 /22"	20/22 /24"	22/24 /26/28"
Spindle Bore	25/8"	25/8"	31/8	31/8	41/8 TO11ER >41/8 TO11”	41/8 TO 16”
Distance Between Centres	36"	60"	75"	100"	136"	184"
Swing Over Saddle	15"	15"	18"	18"	25"	25"
Depth of Gap	6"	6"	8"	8"	9 1/2"	9 1/2"
Swing in Gap	36"	36"	46"	46"	55"	55"
Dia of Face Plate	16"	16"	22"	22"	36"	36"
Dia of Lead Screw	15/8"	15/8"	2"	2"	2 1/4"	2 1/4"
Power	2	3	3	5	5	10

All Geared Radial Drill

Specification of J.P. Brand All Geared Radial drilling Machine
Radial Drill Model	JP-R40	JP-R50	JP-R65	JP-R75
Drilling Capacity (in steel)	40	50	65	75
Drilling Depth	180	225	305	355
Taper Spindle Nose Socket	M.T. 4	M.T. 5	M.T. 5	M.T. 6
No. of Spindle Speed & Range R.P.M.	6 (45-660)	9 (40-790)	12 (18-810)	12 (18-810)
No. of Spindle Feed & Range mm/Rev.	3 (.05-0.15)	3 (.05-1.25)	6 (.012-1.15)	6 (.012-1.15)
Drill Power	1.5 K.W.	2.2 K.W.	3.7 K.W.	5.5 K.W.
Maximum Drilling Radius	950	1100	1600	1800
Minimum Drilling Radius	375	450	500	600
Drilling Head Traverse	800	900	1100	1200
Max. (When the Spindle is in downward position)	1150	1300	1500	1750
Min. (When the Spindle is in downward position)	150	150	100	200
Working Surface of Base Plate Length	800	915	1320	1625
Working Surface of Base Plate Width	550	660	865	900
Arm Elevating Motor	.75 KW	1.5 KW	2.2 KW	3.7 KW
Standard Box Table	300x300x300	550x400x400	600x450x450	600x450x450
Approximate Weight	2000 Kg.	3000 Kg.	4800 Kg.	6500 Kg.

Milling Machine

MODEL	JP-0A	JP-M1	JP-M1.5	JP-M2	JP-M3	JP-M4
Working Surface	900x210	1000x225	1050x250	1250x275	1350x300	1600x350
Number & Size of T-Slots	3x13	3x13	3x13	3x13	3x15	3x15
Distance between T-Slots	45	50	55	65	75	80
Cross Feeds	150	160	200	228	279	305
Vertical Feeds	300	325	375	432	507	610
Longitudinal	425	475	525	625	675	810
Arbor	25.4	25.4	25.4	25.4	25.4	25.4
Number Of Speeds	6(50-1000)	6(50-1000)	6(50-750)	6(50-950)	6(50-950)	6(50-950)
Taper	ISO-30	ISO-30	ISO-40	ISO-40	ISO-40	ISO-40
Distance from Spindle to top (min-max)	10-275	10-300	10-350	10-400	10-500	10-600
Spindle	2 H.P.	2 H.P.	2 H.P.	2 H.P.	3 H.P.	5 H.P.
Coolant	0.10 H.P.	0.10 H.P.	0.10 H.P.	0.10 H.P.	0.10 H.P.	0.10 H.P.
Net Weight	9000 Kg.	1100 Kg.	1400 Kg.	2500 Kg.	3500 Kg.	4000 Kg.
Gross Weight	1100 Kg.	1350 Kg.	1600 Kg.	3000 Kg.	4000 Kg.	4500 Kg.

Power Press H-type

Capacity in Tons	10	20	30	50	75	100	150	200	250	300
Bed Size	280 X330	330 X406	381 x431	457 x508	560 x560	585 x635	685 x735	785 x810	865 x915	915 x1015
Bed to Ram Bottom	200	228	228	305	330	380	455	508	610	660
Stroke Length	50	55	63	80	90	100	145	150	150	175
Crank Shaft Dia out of	75	80	100	110	130	156	170	205	230	256
Gear Dia	430	560	610	660	765	865	965	1066	1170	1220
Fly Wheel Dia	540	570	685	765	835	965	1095	1200	1320	1420
Hole in Ram for Die Clamping	25.4	31.75	31.75	38.1	44.45	50.8	50.8	63.5	76.2	76.2
Floor to top of bed	710	740	740	765	820	825	840	840	855	915
No.'s of strokes per minute	65	60	60	50	45	35	30	30	25	22

Power Press C-type

Capacity in Tons	JP- CP5	JP- CP10	JP- CP20	JP- CP30	JP- CP50	JP- CP75	JP- CP100	JP- CP150	JP- CP200
Bed size	220 x330	325 x435	355 x510	432 x585	510 x760	600 x850	660 x915	720 x980	900 x1100
Bed of RAM bottom	220	230	255	275	385	400	450	500	550
Stroke length	40	50	55	63	80	90	100	145	150
Crank shaft DIA out of	70	75	90	100	110	130	156	170	205
Gear DIA	356	430	560	610	660	765	865	965	1066
Fly wheel DIA	480	540	570	685	765	835	965	1095	1200
Hole in RAM for DIA clamping	25.4	25.4	31.75	31.75	38.1	44.45	50.8	50.8	63.5
Floor to top of bed	610	680	740	840	840	840	840	863	863
No. of strokes per min	70	65	60	60	50	45	35	30	30

Shaper Machine

Shapping Machine (Model)	JP- S12mm	JP- S18mm	JP- S24 & 26mm	JP- S30mm	JP- S 32mm	JP- S36mm	JP- S42mm
Length of Ram-Stroke	305	457	660	762	815	915	1070
Length of Ram	660	914	1325	1400	1536	1640	2135
Length x Width of Ram Bearing	660 x178	711 x245	995 x280	995 x280	1145 x300	1145 x300	1600 x405
Max/Min distance of table from Ram	257/41	406/89	485/109	485/109	521/140	521/140	521/140
Working Surface of Table	300 x228	381 x279	610 x330	762 x370	810 x387	915 x387	1050 x562
Max. Horizontal Table Travel	419	457	665	670	762	865	1070
Max. Vertical Table Travel	140	305	432	435	381	381	457
Angular Movement of Table	+ 60 deg.	+ 60 deg.	+ 60 deg.	+ 60 deg.	Fix	Fix	Fix
Max. Tool Shank size	16x22	30x16	38x21	38x21	38x21	38x21	38x25
Max. Vertical Travel of tool Slide	140	152	152	152	152	228	305
Max. Swivel of tool Head	+ 60 deg.	+ 60 deg.	+ 60 deg.	+ 60 deg.	+ 60 deg.	+ 60 deg.	+ 60 deg.

Hydraulic Shearing Machine

Capacity	Thickness in mm	4	4	6	6	8	8	10	13	13	16
Capacity	Blade length in mm	2500	3100	3100	4100	3100	4100	3100	3100	4100	3100
Type		2504	3104	3106	4106	3108	4108	3110	3113	4113	3116
Capacity acc in Din 1534	Steel 45Kgs. per mm	4	4	6	6	8	8	10	13	13	16
Capacity acc in Din 1534	SL Steel 70Kgs per mm	3	3	4	4	5	5	7	8	8	10
Free passage between standards in mm		2700	3250	3250	4200	3250	4200	3250	3250	4200	3250
Gap standard in mm		100	100	100	100	100	100	100	100	100	100
No. of hold down cylinders		13	15	14	21	14	21	14	15	20	15
Total clamping force hold down in toes		10	11.5	33	50	33	50	33	88	116	88
Free passage hold down in mm with cups		18	18	12	10	12	10	15	25	20	25

Press Brake Machine

Type (CHP)	50	80	120	160
Capacity (Kn)	500	800	1200	1600
Blending length (mm)	1500	2500	3100	3100
Distance between columns (mm)	1250	2050	2500	2500
Stroke (mm)	100	100	100	125
Ram adjustment (mm)	50	70	70	70
Daylight (mm)	375	375	375	400
Throat (mm)	250	250	250	250
Approach speed (mm/sec.)	100	100	100	100
Pressing speed (mm/sec.)	10	10.5	7	7
Return speed (mm/sec)	75	75	63	63
Motor (kw)	5.5	7.5	7.5	11
Weight (kgs)	2900	6700	8000	11000
Length A (mm)	1900	2800	3300	3300
Height H (mm)	2100	2500	2600	2600

Tool And Cutter Grinder

Tool Grinder Specification	JP-TC 80	JP-TC 87	JP-TC 92
Swing over table (Dia)	230 mm	305 mm	350 mm
Maximum distance between centres	305 mm	560 mm	660 mm
Table longitudinal traverse	305 mm	510 mm	610 mm
Table Cross travarse	200 mm	205 mm	255 mm
Table Dimensions	530x142 mm	805x156 mm	1015x156 mm
Tee Slots width	10 mm	12 mm	12 mm
Centre of wheel above table	280 mm	330 mm	350 mm
Table Swivel	90o	90o	90o
Head Swivel	360o	360o	360o
Grinding Spindle Speed	2800 rpm	2800 rpm	2800 rpm
H.P. of Motor	1 HP	1 HP	1 HP
Floor area occupied	900x750 mm	1120x920 mm	1500x950 mm
Height to the machine	1500 mm	1680 mm	1500 mm
Weight of the machine with standard accessories	500 kg.	670 kg.	822 kg.

Hydraulic Hacksaw

HACKSAW MACHINE SIZE	JP-MCH8	JP-MCH9	JP-MCH12	JP-MCH16	JP-MCH20
Stroke	5.75"	5.75"	5.75"	5.75"	5.75"
Blade Size	16x1.25"	18x1.50"	21x1.50"	24x1.50"	30x2"
Capacity of S.Q. Bar	6"	7"	10"	13"	16"
No. of Strokes per minute	80-100-120	80-100-120	60-80-100	40-60-80	30-50-70
Electric Motor Required (1440 RPM)	1HP	1HP	1.5HP	2HP	3HP
L x W x H	49"x30"x32"	51"x30"x32"	61"x36"x53"	69"x39"x78"	77"x42"x78"
Weight (Kg.)	500	550	750	950	1000
Packing Box Size	55"x31"x38"	58"x31"x39"	67"x42"x59"	75"x45"x84"	84"x48"x84"

Horizontal Boring Machine

ITEM CODE No.	JP-HB65	JP-HB80	JP-HB100	JP-HB110	JP-HB125
Alloy Steel work spindle hardened & Ground- diameter	65	80	100	110	125
Morse Taper number.	4	5	6	6	6
Max longitudinal Movement of the working Spindle.	410	510	510	510	600
Number of Spindle Speeds.	9	9	9	9	9
Range of Spindle Speeds	20 to 300	15 to 300	15 to 300	15 to 250	12 to 250
Longitudinal Work spindle feeds Nos.	9	9	9	9	9
Max height of the spindle axis from table surface.	800	925	1000	1100	1200
Min height of the spindle axis from the table surface.	20	25	30	30	30
Dimensions of the Rotary Table.	880 x 1015	900x1105	1030 x 1375	1100 x 1450	1200 x 1500
Longitudinal Table transverse.	1500	1625	1775	1925	2050
Transversal Table Travel Feeds(including one rapid)	10	10	10	10	10
Vertical Headstock travel feeds(including one Rapid)	4	4	4	4	4

	We Manufacture