J. P. R. Marketing

A chain-link fence or wire netting or chain-wire fence is a type of woven fence usually made from galvanizedsteel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.

chain link fencing fencing usually comes in 50 ft rolls which can be joined by "unscrewing" one of the end wires and then "screwing" it back in so that it hooks both pieces. Common heights include 3 ft, 3 ft 6 in, 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Chain link mesh openings can be manufactured from apertures ranging from 18mm to 100 mm. The wire diameter ranges from 1. 6mm to 4. 0mm. The popularity of chain-link fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain-link fences are transparent, and do not obscure sunlight from either side of the fence. If a semi-opaque fence is desired, this can be achieved by the insertion of slats into the mesh. Installation the installation of chain-link fence involves setting posts into the ground and attaching the fence to them. The posts may comprise steel tubing, timber or concrete and may be driven into the ground or set in concrete. End posts, or terminal posts, must either be set in concrete or anchored to prevent leaning under the tension of a stretched fence. After the end posts are set, line posts are driven in equally spaced at intervals of 2. 5-3. 0m. The fence is then attached at one end, stretched, and attached at the other; the excess being easily removed by unscrewing a wire. Finally it is tied to the line posts with aluminum wire. Chain-link fences are also called cyclone or hurricane fences.
applications:

Wall plastering mesh is manufactured by the thin galvanize strip die cutting and expansion, has the regular diamond mesh and high tensile strength. The mesh is manufactured from prime quality steel sheets that are slit and expanded to form small diamond shaped openings. The large number of openings provides more plaster keys than any other type of lathing material. The mesh acts as an anti cracking reinforcement in the construction of brick block masonry, wall beam and column joints, chasing works etc.

JPR weld Mesh Fabric is formed by spacing the main and cross wires , which are fixed at their points of intersection by electric welding. The mesh confirms to Indian Standard Specification No IS1566 of 1982 revised for Hard Drawn Steel Wire Fabric. JPR Weld Mesh c Fabric is available in rectangular or square mesh. The mesh can be delivered in either roll form or sheet form, depending on the specifications. Weld mesh can be manufactured from different wires MS Wire, GI Wire, Stainless Steel wire etc. Custom required sizes can be supplied for bulk requirements

JPR Weld Mesh Fabric WMF id fromed by spacing the main and the cross wires, which shall be fixed at their points of intersection by eletric welding. The fabric confroms to indian Standard Spectification No, 1566
of 1982 ( revised ) for Hard Drawn Steel wire fabric for concrete reinforcement.
JPR WMF is available in rectangular or square mesh in roll from accroding to the specifications mentioned.
Special size WMF can be produced on requirement.

Fabric Materials: Galvanized iron wire, stainless steel wire.
WWF Treatment: Electro galvanizing, zinc plating or plastic coating.

Mesh Sizes: 1", 1/2, 11/2, 1/4, 3/4 etc.

Fabric Size: 30x100 as standard
Fabricating Forms: Welded wire fabrics can be supplied in rolls or panels. It also makes ideal material in construction for easy work and firm structure, made into the formwork of welded wire reinforcement.

Binding Wire is also known as Black iron wire, also called black wire, is mostly used in construction or daily use as binding material. Soft annealed wire, also known as annealed wire, offers excellent flexibility and softness through the process of oxygen free annealing.

Soft annealed wire is mostly used in woven wire mesh or as wire tie. Iron wire can be processed into cut wire or U type wire for binding uses. JPR has binding wire which is 0.9mm thick and is annealed, for soft and ease of usage. Annealed binding wire benefits the user, as there is no breakage, has a lot of flexibility, has a correct diameter ensuring longer length etc. However, for commercial applications, we have binding wire which is not annealed and can be used for general applications.

Perforated metal sheets are used IN A WIDE RANGE OF ACTIVITIES, DOMESTIC, agricultural AND INDUSTRIAL for separating, cleaning, drying and grinding of products such as spices, grain, seeds, stone, gravel and coal and many liquids. Perforated metal sheets are also used for sound attenuating, protective guards for machinery, heating and ventilating systems as well as for achieving ornamental effects on walls and ceilings. Perforated Metal Sheets are available in various sizes, thickness and hole sizes for Industrial and General use. Perforated sheets can be supplied in a wide range of materials like mild steel, galvanized steel, aluminium, stainless steel and special alloys to suit different applications.

Barbed wire, also known as barb wire, is a type of fencing wire constructed with sharp edges or points arranged at intervals along the strand. It is used to construct inexpensive fences and is used atop walls surrounding secured property. It is also a major feature of the fortifications in trench warfare.

A person or animal trying to pass through or over barbed wire will suffer discomfort and possibly injury. Barbed wire fencing requires only fence posts, wire and fixing devices such as staples. It is simple to construct and quick to erect by an unskilled person.

Concertina coil, Punched Tape Concertina Coil is modern version of Barbed Wire Designed to prevent intrusion. It is a very effective way of barricading high security areas. Punched Tape Concertina Coil is fabricated from high tensile wire onto which a multitude of razor sharp barbs are formed at close intervals. The barb are designed to have a precision and gripping action. The wire strip are galvanised to prevent corrosion.

Most barbed wire fences, while sufficient to discourage cattle, are passable by humans who can simply climb over the fence, or through the fence by stretching the gaps between the wires using non-barbed sections of the wire as hand holds. To prevent humans crossing, many prisons and other high-security installations construct fences with razor wire, a variant which instead of occasional barbs features near-continuous cutting surfaces sufficient to injure unprotected persons who climb on it. A commonly seen alternative is the placement of a few strands of barbed wire at the top of a chain link fence. The limited mobility of someone climbing a fence makes passing conventional barbed wire more difficult. On some chain link fences these strands are attached to a bracket tilted 45 degrees towards the intruder, increasing the difficulty.

G.I. WIRE has a wide variety of uses for the purpose of making gabions, fencing, netting, cable armoring, signaling, nail making, telephone wiring, etc. G.I. WIRE is produced from H.B. Wires by latest plant and machineries followed by annealing, pickling and hot dip galvanizing process.

JPR offers cages for grower and layer for broiler breeder birds. The birds are housed from the 8th week till the birds achieve the age of 20 weeks in the grower cages. After the 20th week, the birds are transferred to the laying cages, and remain till the culling of the birds is carried out. Since different types of cages are available to suit the different age group/size of the birds, the stress on the birds is greatly reduced leading to higher production.
It is to be noted here that the birds are housed only in two tier cages, as it is convenient to carry out the artificial insemination. The lower tier of the cages is avoided, as it is very difficult to carry out AI at such low levels.
The male birds are located in a different type of cage, which is located amongst the female birds. The positioning of the male birds is also designed in a way to reduce the distance from the female birds. This is done to avoid delay in inseminating the female birds. Usually, there are 10 male birds for every 100 female birds. However, the ratio can be changed to suit the requirements of the farm.

JPR offers cages for chick brooder, growers and layers for commercial layer birds. The poultry birds are housed from day old till the 8th week in the brooding cages. In the 8th week, the birds are transferred to the growing cages, until the birds achieve the age of 16 weeks. After the 16th week, the birds are the birds are transferred to the laying cages, till the culling of the birds is carried out. Since different types of cages are available to suit the different age group size of the birds, the stress on the birds is greatly reduced leading to higher production.

JPR offers cages for grower and layer for layer breeder birds. The birds are housed from the 8th week till the birds achieve the age of 18 weeks in the grower cages. After the 18th week, the birds are transferred to the laying cages, and remain till the culling of the birds is carried out. Since different types of cages are available to suit the different age group/size of the birds, the stress on the birds is greatly reduced, leading to higher production.
It is to be noted here that the birds are housed only in two tier cages, as it is convenient to carry out the artificial insemination. The lower tier of the cages is avoided, as it is very difficult to carry out AI at such low levels.
The male birds are located in a different type of cage, which is located amongst the female birds. The positioning of the male birds is also designed in a way to reduce the distance from the female birds. This is done to avoid delay in inseminating the female birds. Usually, there are 10 male birds for every 100 female birds. However, the ratio can be changed to suit the requirements of the farm.