J. T. C. L. S Appliances Pvt. Ltd.

Our air operated double diaphragm pumps are widely used in different areas including paints, stains, coatings and dyes, chemicals, corrosive and abrasive fluids, lubricants, ceramic glazes, sludge, slurry and waste fluid, soaps, detergents and solvents.

Some of the applications are as follows :

• Removing waste fluid
• Unloading fluids
• Transferring fluids from drums
• Sanitizing buildings and equipment
• Draining tanks and sumps
• Transferring high temperature acids
• Skimming and transferring oil
• Servicing lubrication equipment

We supply optimum quality air operated pumps that are manufactured using superior grade raw material. Our range is widely used for various applications owing to its various features.

Technical Specifications:

• Number Pump Package Max.
• Working Pressure psi (MPa, bar) Max.
• Air Input Pressure psi (MPa, bar)
• Fluid Flow at 60 cpm gpm (1pm) Vol. per Cycle
• OI (CO) Air Inlet Size Fluid Inlet Size Fluid Outlet Size Package Instruction Manual 206515 President 10:1 1000 P, 69) 100 (0 7, 7) 3gpm (11.4) 6.4 (189) 1/2npt(f) 3/4 npiffl 1/2 npt(t) 306617 , 226314 Bulldog 101 1000 (7, 69) 100,(0.7, 7) B,(29) 17 (505) 3/4 npsm(t) 2 nptff) 1-1/2 npt(m) 3Q6926,308509,965389 Premier 34:1 3400 (23, 230) 100 (0.7, 7) 9.2,(34.8) 19.6 (580) 3/4 npsm(f) 2 npt(f) 1-1/2 npt(m).

Our entire range of Husky 1040 Air Operated Double Diaphragm Plastic Pumps is manufactured using quality raw material. These are customized as per the specifications of our clients and are in wide demand in various industries as well as find usage in domestic applications. We have been offering these in standard models.

 

Ffeatures:

• 1 in (25.4 mm) center- and end-porting

• High flow - 40 gpm (151 Ipm) in a compact, portable size

• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)

• Epoxy-coated center section for corrosive environments

• Equipped with an effective and reliable air valve system

• External controller for optional remote operation

• Stainless steel center section for corrosive applications

 

Typical Applications:

 

• Drum fluid transfer

• Unloading fluids

• Chemical evacuation

• Ceramic glaze supply

• Dewatering and sump evacuation

• Tank and sump drainage

Typical Fluids Handled:

• Chemicals

• Contaminated surface water

• Adhesives, varnishes, dispersions, solvents and stains

• Resins, latexes, wood preservative stains, concrete paints and primers

• Ceramic slips and slurries

 

Technical Specifications

 

• Maximum fluid working pressure: 120 psi (8.4 bar, 0.84MPa)

• Maximum free flow delivery: 40 gpm (151 Ipm)

• Maximum pump speed: 276 cpm

• Displacement per cycle: 0.15 gallon (0.57 liter)

• Maximum suction lift (D73888): 19ft (5.8 m) dry

• Maximum size pumpable solids: 0.13 in (3.2 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 76 dBa

• Maximum air consumption: 60 scfm (1.7m3/min)

• Air pressure operating range: 20 to 120 psi (1.8 to 7 bar, 0.18 to 0.7 MPa))

• Air inlet sire 1/2 npt (f)

• Fluid inlet & outlet size: 1 npt(f) or bspt(f)

• ANSI-flange

 

Weight:

 

• Aluminum: 18 lb (8.2 kg)

• Stainless steel: 33 lb (15 kg)

• Stainless steel with stainless steel center section: 47 lb (22 kg))

• Instruction manual: 308479

We are a leading manufacturer and supplier of a wide range of Husky 1040 Air Operated Double Diaphragm Metal Pumps. These pumps are designed and developed using latest tools and are customized as per the specifications of our clients.

 

Features:

 

• 1 in (25.4 mm) ANSI end-porting

• High flow - 40 gpm (151 lpm) in a compact, portable size

• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)

• Epoxy-coated center section

• External controller for optional remote operation

• Stainless steel center section for corrosive applications

 

Typical Applications:

 

• Drum fluid transfer

• Unloading fluids

• Transferring high temperature acids

• Chemical evacuation

• Tank and sump drainage

• Circulating plating chemical tank

 

Typical Fluids Handled:

 

• Chemicals

• Acetic acid

• Chromic acid

• Hydrochloric acid

• Hydrofluoric acid

• Sulfuric acid

• Nitric acid

 

Specifications:

 

• Maximum fluid working pressure: 120 psi (8.4 bar, 0.84 MPa)

• Maximum free flow delivery: 40 gpm (151 Ipm)

• Maximum pump speed: 276 cpm

• Displacement per cycle: 0 0.15 gallon (0.57 liter)

• Maximum suction lift (D73888): 19ft (5.8 m) dry

• Maximum size pumpable solids: 0.13 in (3.2 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250°F(121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 76 dBa

• Maximum air consumption: 60 scfm (1.7m3/min)

• Air pressure operating range:20 to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa)

• Air inlet sire 1/2npt(f)

• Fluid inlet & outlet size: 1 npt(f) or bspt(f)

• ANSI-flange

 

Weight:

 

• Aluminum:18 lb (8.2 kg)

• Stainless Steel: 33 lb (15 kg)

• Stainless Steel with stainless steel center section: 47 lb (22 kg)

• Instruction manual:308479

To cater to the various requirements of various industries as well as domestic applications, we offer a wide range of Husky 1590 Air Operated Double Diaphragm Plastic Pumps. Our pumps are customized as per the specifications of our clients.

 

Features:

 

• 1-1/2 in (38.1 mm) ANSI end-porting

• High flow - 100 gpm (378 lpm) in a compact, portable size

• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)

• Patented, high-reliability closed center air valve is online serviceable

• Lube-free operation

• Epoxy-coated air section

• External controller for optional remote operation

• Stainless steel center section for corrosive applications

 

Typical Applications:

 

• Filter press

• Tank stripping

• Bilge pumping

• Sand and ball mill pumping

• Oil transfer and oil skimming

• Chemical plating

 

Typical Fluids Handled:

 

• Latex

• Abrasive fluids

• Slurries: petroleum, lime, clay, ferrite, salt/brine and pu

• Sludge: secondary and clarifier

• Pottery slip

 

Technical Specifications:

 

• Maximum fluid working pressure: 120 psi (8.4 bar, 0.84MPa)

• Maximum free flow delivery: 100 gpm (378.5 lpm)

• Maximum pump speed: 200 cpm

• Displacement per cycle: 0.5 gallon (1 96 liter)

• Maximum suction lift (DB3366): 20 ft (6.1 m) dry

• Maximum size pumpable solids: 0.19 in. (4.8 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 77 dBa

• Maximum air consumption: 125 scfm (3.5 m3/min)

• Air pressure operating range: 20 to 120 psi (1.8 to 7 bar, 0.18 to 0.7 MPa))

• Air inlet sire 1/2 npt (f)

• Fluid inlet & outlet size: 3 1- 1/2 nptfl or bspt(f)

• ANSI-flange

 

Weight:

• Aluminum: 33.5 lb

• Stainless steel: 85.5 lb (38.6 kg)

• Stainless steel with stainless steel center section: 988 lb (44.8 kg)

• Instruction manual: 308441

We are catering to the pumping requirements of various industries by offering a wide range of Husky 205 Air Operated Double Diaphragm Plastic Pumps. Customized as per the specifications of our clients, these pumps are known for high performance.

 

Features:

 

• 1/4 in (6.35 mm) end-porting

• Low-cost, compact design

• Spring check valves for superior priming in any mounting configuration

• True-formed PTFE and Santoprene diaphragms for enhanced performance

• External controller for optional remote operation

 

Typical Applications:

 

• Supply pump for OEM applications

• Printing ink supply

• Wastewater chemical supply

• Plating/surface finishing

• Chemical dosing

 

Typical Fluids Handled:

 

• Waterborne materials, some HHC's

• Paints, coatings, inks and dyes

• Car wash chemicals

• Laundry chemicals and detergents

• Chemicals

• Inks

 

Technical Specifications:

 

• Maximum fluid working pressure: 100 psi (7 bar, 0.7MPa)

• Maximum free flow delivery: 5.0 gpm (18.9lpm)

• Maximum pump speed: 250 cpm

• Displacement per cycle: 0.02 gallon (0.076 liter)

• Maximum suction lift (D12096): 10 ft (3 m) dry

• Maximum size pumpable solids: 0.06 in (1.5 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 125 cpm: 70 dBa

• Maximum air consumption: 60 scfm (1.7m3/min)

• Air pressure operating range: 20 to 120 psi (1.8 to 7 bar, 0.18 to 0.7 MPa))

• Air inlet size: 1/4npt(f)

• Fluid inlet & outlet size: 1/4 npt(f)

• Air exhaust port size: 1/4 npt(f)

• ANSI-flange

 

Weight:

 

• Acetal: 2.5 lb (1.1 kg)
• PVDF:2.8 lb (1.3 kg)

 

Wetted parts (in addition to ball, seat and diaphragm materials, which may vary by pump):

 

• Polypropylene pump: Glass-filled Polypropylene, Santoprene, PTFE, Polypropylene

• Acetal pump: Acetal with Stainless Steel fibers, PTFE, Acetal, Santoprene

• PVDF pump:PVDF. PTFE, Santoprene

• Instruction manual: 308652

We are engaged in manufacturing, exporting and supplying a precision-engineered range of Husky 2150 Air Operated Double Diaphragm Metal Pumps. These pumps are known for superior performance, accurate pressure flow and are customized as per the specifications of our clients.

 

Features of these pumps are:

 

Features:

 

• 2 in (50.8 mm) ANSI end-porting

• Larger ports for more (low ¿ up to 150 gpm (568 lpm)

• Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa)

• Patented, high-reliability closed center air valve is online serviceable

• Lube-free operation

• Epoxy-coated air section

• External controller for optional remote operation

• Stainless steel center section for corrosive applications

 

Typical Applications:

 

• Drum fluid transfer

• Bulk fluid supply

• Chemical evacuation

• Ground water and sump evacuation

• Waste fluid removal

• Tank and bilge drainage

• Slurry and sludge transfer

• Filter press feed

• Typical Fluids Handled

• Acids and gases: acetic, chromic, hydrochloric, Hydrofluoric, sulfuric, nitric and

• phosphoric

• Ship cleaning and stripping chemicals

 

Technical Specifications of these pumps are as follows:

 

• Maximum fluid working pressure: 20 psi (8.4 bar, 0.84 MPa)

• Maximum free flow delivery:150 gpm (568 lpm)

• Maximum pump speed:145 cpm

• Displacement per cycle: 1.03 gallon (3.90 liter)

• Maximum suction lift (DF2666):20 ft (6.1 m) dry

• Maximum size pumpable solids:0.25 in (6.3 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N :180°F (82.2°C)

• TPE: 50°F (65.5°C)

• Fluoroelastomer: 250°F(121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 78 dBa

• Maximum air consumption: 175 scfm (4.9 m3/min)

• Air consumption at 70 psi/60 gpm: 60 scfm (1.7 m3/min)

• Air pressure operating range:20 to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa)

• Air inlet sire:/2 npt(f)

• Fluid inlet & outlet size: 2 in (51 mm) ANSI-flange

 

Weight:

 

• Polypropylene: 9 lb (22 kg)

• Polypropylene with stainless steel center section: 68.5 lb (31 kg)

• PVDF:68 lb

• (30.8 kg)

• PVDF with stainless steel center section: 87.5 lb (39.6 kg)

• Instruction manual: 08550.

Customized as per the specifications of our clients, our wide range of Husky 2150 Air Operated Double Diaphragm Plastic Pumps is in wide demand in the market. These pumps have high operational efficiency, require low power input and are known for a long performing life.

 

Features:

• 2 in (50.8 mm) ANSI end-porting
  
• Larger ports for more flow - up to 150 gpm (568 lpm)
  
• Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa)
  
• Patented, high-reliability closed center air valve is online serviceable
  
• Lube-free operation
  
• Epoxy-coated air section
  
• External controller for optional remote operation
  
• Stainless steel center section for corrosive applications

 

Typical Applications:

• Drum fluid transfer
  
• Bulk fluid supply
  
• Chemical evacuation
  
• Ground water and sump evacuation
  
• Waste fluid removal
  
• Tank and bilge drainage
  
• Slurry and sludge transfer
  
• Filter press feed

 

Typical Fluids Handled:

• Alkalies and solvents
  
• Suspensions and dispersions
  
• Solvents, latex paints, varnishes, resins and adhesives
  
• Sludge and waste water

 

Technical Specifications:

 

• Maximum fluid working pressure: 120 psi (8.4 bar, 0.84MPa)

• Maximum free flow delivery: 150 gpm (568 lpm)

• Maximum pump speed: 145cpm

• Displacement per cycle: 1.03 gallon (3.90 liter)

• Maximum suction lift (DF3666): 20 ft (6.1 m) dry

• Maximum size pumpable solids: 0 0.25 in (6.3 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 76 dBa

• Maximum air consumption: 28 scfm (0.672 m3/min)

• Air pressure operating range: 25 to 100 psi (1.8 to 7 bar, 0.18 to 0.7 MPa))

• Air inlet sire 1/4 npt (f)

• Air exhaust port size: 3/8 npt(f)

• Fluid inlet & outlet size: 3/4 npt(f) or bspt(f)

• ANSI-flange

 

Weight:

• Aluminum: 58 lb (26.3 kg)

• Extended aluminum:62 lb (28.1 kg)

• Stainless steel.:127 lb (57.6 kg)

• Stainless steel with stainless steel center section:146.5 lb (66.4 kg)

• Ductile iron: 130 lb (59 kg)

• Instruction manual:308368

We are engaged in manufacturing, exporting and supplying a wide range of Husky 307 Air Operated Double Diaphragm Plastic Pumps. These pumps are designed & developed as per the requirements of our clients and are supplied at industry leading prices. To meet the ever-increasing demands of our clients, we have been manufacturing these in bulk.

 

Features:

 

• 3/8 in (9.52 mm) end-porting

• Fully-groundable acetal model

• Delivery up to 7 gpm (26.5 Ipm)

• Operates on as little as 20 psi (1.4 bar, 0.14 MPa) air pressure

• Quiet operation: 75 dBa at 50 psi (3.5 bar, 0.35 MPa) and 60 cpm

 

Typical Applications:

 

• Drum transfer for fluids up to 1000 centipoise

• Circulation of low viscosity inks, stains and dyes

• Coolant circulation and evacuation

• Waste fluid removal

• On-demand batch chemical metering

• Low viscosity adhesive supply

• Consistent low pressure air spray or HVLP supply

 

Typical Fluids Handled:

 

• Paints

• Lubricants

• Inks

• Stains

• Solvents

• Coatings

• Dyes

 

Technical Specifications:

 

• Maximum fluid working pressure: 100 psi (7 bar, 0.7MPa)

• Maximum free flow delivery: 7.0 gpm (26.5 lpm)

• Maximum pump speed: 330 cpm

• Displacement per cycle: 0.02 gallon (0.076 liter)

• Maximum suction lift (D3I255): 12 ft (3.7 m) dry

• Maximum size pumpable solids: 0.06 in (1.5 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 75 dBa

• Maximum air consumption: 6 scfm (0.17 m3/min)

• Air pressure operating range: 20 to 100 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa)

• Air inlet size: 1/4 npt(f) or bspt(f)

• Fluid inlet & outlet size: 3/8 npt(f)

• ANSI-flange

 

Weight:

 

• Acetal: 5.2 lb (2.4 kg)

• Polypropylene: 4.75 lb (2.2 kg)

 

Wetted parts (in addition to ball, seat and diaphragm material, which may vary by pump):

 

• Acetal pump: Acetal with Stainless Steel fibers

• PTFE Polypropylene pump: Polypropylene, PTFE

• Instruction manual: 308553

We are offering to our clients a wide range of Husky 515 Air Operated Double Diaphragm Plastic Pumps. These pumps are designed and developed as per the specifications of our clients and are in accordance with the latest industry standards.

 

Features:

• 1/2 in (12.7 mm) center-porting and 3/4 in (19.05 mm) end-porting

• No seals to leak or fail

• Quiet running ¿ less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

• High flow rates in a small, portable package

• External controller for optional remote operation

 

Typical Applications:

 

• Machine lubrication servicing

• Drum evacuation

• Plating and dip tanks

• Water treatment

Typical Fluids Handled:

 

• Cleaning fluids and detergents

• Chemicals

• Ceramic glazes

• Inks

• Solvents and flammables

• Acids and bases

 

Technical Specifications:

 

• Maximum fluid working pressure: 100 psi (7 bar, 0.7 MPa)

• Maximum free flow delivery: 15 gpm (57 lpm)

• Maximum pump speed: 276 cpm

• Displacement per cycle: 0.15 gallon (0.57 liter)

• Maximum suction lift (D73888): 19ft (5.8 m) dry

• Maximum size pumpable solids: 0.13 in (3.2 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Fluoroelastomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 76 dBa

• Maximum air consumption: 60 scfm (1.7m3/min)

• Air pressure operating range: 20 to 120 psi (1.8 to 7 bar, 0.18 to 0.7 MPa))

• Air inlet sire 1/2 npt (f)

• Fluid inlet & outlet size: 1 npt(f) or bspt(f)

• ANSI-flange

Weight:

 

• Aluminum: 18 lb (8.2 kg)

• Stainless steel: 33 lb (15 kg)

• Stainless steel with stainless steel center section: 47 lb (22 kg))

• Instruction manual: 308479

We have in store a wide range of Husky 716 Air Operated Double Diaphragm Metal Pumps. These pumps are manufactured in compliance with latest industry standards and are customized as per the specifications of our clients. While manufacturing these pumps, we make use of quality raw material and make sure that our clients receive the best available range of pumps.

 

Features:

 

• 3/4 in (19.05 mm) center- and end-porting

• No seals to leak or fail

• Quiet running:less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

• High flow rates in a small, portable package

• External controller for optional remote operation

 

Typical Applications:

 

• Machine lubrication servicing

• Cleaning fluids and detergents

• Plating and dip tanks

• Water treatment

 

Typical Fluids Handled:

• Oil

• Water

• Most solvents

 

Technical Specifications:

 

• Maximum fluid working pressure: 100 psi (7 bar. 0 7MPa)

• Maximum free flow delivery: 16 gpm (61 lpm)

• Maximum pump speed: 400 cpm

• Displacement per cycle: 0.04 gallon (0.15 liter)

• Maximum suction lift (D53331): 11 ft (3.4 m) dry

• Maximum size pumpable solids: 0.09 in (2.5 mm)

• Maximum operating temperature" PTFE :220°F*(104.4°C)

• Santoprene:180°F (82.2°C)

• Buna-N : 180T (82.2°C)

• TPE: 150°F (65.5°C)

• Ruoroelaslomer: 250° F (121.1°C)

• Geolast: 50°F (65.5°C)

• Typical sound level at 70 psi air (4.9 bar. 0.49 MPa) air @ 50 cpm: 76 dBa

• Maximum air consumption: 28 scfm (0.672 m3/min)

• Air pressure operating range: 25 to 100 psi (1.8 to 7 bar, 0.18 to 0.7 MPa))

• Air inlet sire 1/4 npt (f)

• Air exhaust port size: 3/8 npt(f)

• Fluid inlet & outlet size: 3/4 npt(f) or bspt(f)

• ANSI-flange

 

Weight:

 

• Aluminium: 8.5 lb (3.9 kg)

• Stainless steel: 18 lb (8.2 kg) Wetted parts (in addition to ball, seat and diaphragm materials-which may vary by pump)

• Aluminum pump: Zinc-Plated Steel Polypropylene. Stainless Steel, Polyester, Stainless Steel pump, Nickel-Plated Brass, Epoxy-Coated Steel: 308981

• Instruction manual: 308981