Jyoti IndustriesNew Delhi, Delhi | IndiaMART Member Since: 2009 |  |
| PRODUCTS & SERVICES | |
|
| ProductsBoard Retaining Coupler Made of sheet metal with Bolt, Zinc Plated. Used for quickly and securely locking the boards in correct position. Tube Size: 48mm Nut Size:21/22/23 Half Coupler (Drop Forged) Size: 40 mm N.B. Material: Drop Forged Net Weight: 0.540 kg Application: To connect two 40mm N.B. tubes Half Coupler (Pressed) Size 40 mm N.B. Material Pressed Net Weight 0.540 kg(5mm thickness) Application To connect two 40mm N.B. tubes Internal End To End Coupler (Joint Pin) Pressed Cap Size 40 mm N.B. Material Pressed Net Weight 0.810 kg Application To quick end to end connection for two40mm NB tubes only in compression and not in bending.. Put Log Coupler (Pressed Cap) Size 40 x 40mm N.B. Material Pressed Net Weight 0.600 kg Application To connect putlog tube over ledger tubes at 90 Swivel Coupler (Drop Forged) Size: 40 x 40mm N.B. Material: Drop Forged Net Weight: 1.100 kg Application: To connect two 40mm N.B. tubes at any angle Swivel Coupler (Pressed) Size 40 x 40mm N.B. Material Pressed Net Weight 1.070 kg(5mm thickness) Application To connect two 40mm N.B. tubes at any angle Fence Coupler (Pressed) Size: 40 x 40mm N.B. Material: Pressed Net Weight: 0.440 kg Application : To connect two 40mm N.B. tubes parallel to each other Girder Coupler (Forge Capd) Size: 40 mm Material: Pressed with forged cap Net Weight: 1.500 kg Application : To connect 40mm N.B. tubes with Girder. Kwik Stage / Quickwedge Ledger These items are made from tube with a cast wedge-fixing device at each ends. These are used to tie in the uprights or standards longitudtinally. Kwik Stage Board Brackets The One, Two and Three Board Stage Brackets enables an additional 255 mm, 450 mm and 675 mm platform respectively to be provided on the inside of the Scaffold nearset the building. Kwik Stage Face Brace Diagonal Brace has pivoting cative wedge fittings welded to each end, which locate the "V" pressing on the standards. Used to form facad bracing. All sizes are available. KwikStage Standards / Verticals It form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 X 4 mm thick. They have a series of "V" Pressed welded at nominal 495 mm on the tube to provide a location for ledger and transoms. Put Log Coupler (Forged Cap) Size: 40 x 40mm N.B. Material: Pressed with Forged cap Net Weight: 0.625 kg Application: To connect put log tube over ledger tubes at 90 Double Coupler (Drop Forged) Size: 40 x 40mm N.B. Material: Drop Forged Net Weight: 1.050 kg Application: To connect two 40mm N.B. tubes at 90 angle Double Coupler (Pressed) Size: 40 x 40mm N.B. Material: Pressed Net Weight: 0.900 kg (5 mm Thickness) Application: To connect two 40mm N.B. tubes at 90 angle Sleeve Coupler (Pressed) Size 40 x 40 mm N.B. Material Pressed Net Weight 1.080 kg Application To axial connection of two tubes that are subject to bending or tension 40 x 40 mm NB Kwik Stage Tie Bar A length of 38 mm X 38 mm angle iron with a dowl at both ends. Used to connect stage brackets together. Wing Nut Material : Malleable Cast Iron Weight : 0.320 Kg Working Load : 90 Kn Kwik Stage Transoms They are a rolled "T" section with wedge fixing device on each ends. Also available with back to back angles of 50 X 50 X 5 mm to form a "T" These transoms engaged with "V" pressing. |
Processing... |
| |||||||||||||
| Companies | Products | Trade Leads | Tenders | Trade Shows | Travel | |
© 1996-2012 IndiaMART InterMESH Limited. All rights reserved worldwide. |