|
|
 |
| | Smaller Air Receiver We are also manufacturing Smaller Air Receivers of volume up to 500Ltrs.These Air Receivers are suitable for moulting small air compressors from 1 HP to 15 HP. These Air receivers are suitable for Horizontal mounting as shown in the picture.Further they are also mounted on the wheels for easy transportation from one place to another on portable services.
|
Vertical Air/Vacuum Receiver Kaarthik Heat Transfer is manufacturing Vertical Air/Vacuum receivers for normal working pressure of 7Kg/Cm2g and also for higher pressure up to 20Kg/Cm2g.The Air receivers of volume 1cu.m., 1.5cu.m., 2cu.m., 3cu.m. and 5cu.m.The thickness of the shell plates are 5mm,6mm,8mm and 10mm depending upon the working pressure. The en shield are cold forged on 6mm,8mm,10mm and 12mm MS sheets are used. The fabrication of the Air receivers are carried out as per the pressure vessel code and with proper material.
| |
| | Tube Bundles / Shells Kaarthik Heat Transfer is also manufacturing spare tube bundles and shells for all the Heat Exchangers, Inter Coolers and After Coolers and Oil Coolers. On the replacement areas, we do lot of improvements on the Construction of the Tube bundles and Shells depending up on the type of application for which these Tube bundles and Shells are used. If water is used on the shell side for cooling purpose, We offer Stainless Steel Baffle Plates for longer life of the tube bundles. If the quality of water is very bad and frequent cleaning is required on the shell side, we change the tube arrangements from Triangular Pitch to Square Pitch.
|
|
© Kaarthik Heat Transfer. All Rights Reserved (Terms of Use)