Our organization has achieved a renowned position in the industry, with the support of a experienced team of professionals. They are well versed in their respective fields and possess all the mandatory credentials to successfully handle in hand production demands.

Our team comprises of designers, procurement professionals, technocrats, engineers, research and development,  personnel, quality personnel, marketing professionals and administrative staff. Our designers conceptualize new designs for our range of rubber components. Our quality personnel are engaged in inspecting the entire production practice right from the procuring of raw material to the final dispatch of range. To maintain honest business relation with our clients, we have created a team of marketing professionals.

Further, we also provide our personnel with regular skill training that helps in the development of their skills and process knowledge, which in turn help us to maintain the product quality standards being delivered by us.

Our manufacturing unit enables us to complete the production orders well within the defined timeframe. Located in Mumbai, our manufacturing unit is spread across vast area and is equipped with all the latest machines that ensure smooth production of our range.

We also have facilities to check the quality of components at every level of the production. Our in-house product development unit is also constantly involved in conceptualizing innovative ideas for our range of rubber components. 
 
Some of the machines and equipment that are installed in the manufacturing unit are as follows :

• CNC
• Rubber mixing mills
• Calendaring machines
• Roll wrapping machines
• Lathe machines
• Steam boilers
• Vulcanizing chambers
• Electrical and steam
• Heated hydraulic presses
• Rubber-allied machineries

These machines are regularly checked in order to maintain the efficiency of flawless production.

We have expertise this field of manufacturing and exporting rubber components for the last two decades. This is possible with the quality that has been offered in array of rings, hydraulic seal kits, molded rubber gaskets and oil seals. We always ensure that superior raw materials are used in order to provide the best goods that helps in acquiring the ultimate level of satisfaction from our clients. Our experts source the raw material from the most reliable and certified vendors. a brief description of the raw materials used are mentioned below:    

H-PU thermoplastic polyurethane: extremely abrasion and extrusion resistant seal material. Easy mounting because of high elasticity. Very good hydrolysis resistance hardness: 95 shore a temperature range: -35°C to 110°C Available dimensions: up to 326 mm diameter, application: at standard hydraulic conditions up to 40 MPa.

C-HPU: extremely abrasion and extrusion resistant seal material. Easy mounting because of high elasticity. Very good hydrolysis resistance. Hardness: 94 shore a temperature range: water till 90°C, hot air till 100°C Available dimension: up to 1070 mm diameter application: at standard hydraulic conditions up to 40 MPa

C-HPU 55D casted polyurethane, hardness 55 shore d extremely abrasion and extrusion resistant seal material. Easy mounting because of high elasticity. Very good hydrolysis resistance. Hardness: 55 shore d temperature range: water till 90°C, hot air till 100°C available dimension: up to 1070 mm diameter Application: at standard hydraulic conditions up to 55 MPa

C-HPU 72D casted polyurethane, hardness 72 shore d extremely abrasion and extrusion resistant seal material. In particular for composite seals. Easy mounting because of high elasticity. Very good hydrolysis resistance. Hardness: 72 shore d temperature range: water till 90°C, hot air till 100°C available dimension: up to 1070 mm diameter Application: at standard hydraulic conditions up to 55 MPa

SL-PU polyurethane filled with solid libricants optimized in case of friction. Specially for pneumatic. Easy mounting because of high elasticity. Very good hydrolysis resistance. Hardness: 96 shore a temperature range: water till 90°C, hot air till 100°C available dimension: up to 1070 mm diameter application: at standard hydraulic conditions up to 40 MPa

LT-PU low-temperature polyurethane. This polyurethane is particulary for low temperature plus all the behaviors of a modern polyurethane as sealing-material. Hardness: 96 shore a temperature range: -50°C up to 110°C available dimension: up to 1070 mm diameter application: at standard hydraulic conditions up to 40 MPa

TPU thermoplastic polyurethane extremely abrasion and extrusion resistant seal material. Easy mounting because of high elasticity. Good hydrolysis resistance. Hardness: 95 shore a temperature range: -35°C to 110°C available dimensions: up to 326 mm diameter, application: at standard hydraulic conditions up to 40 MPa.

NBR nitrile-butadiene-rubber abrasion resistant seal material high elasticity means easy installation. The semi-finished material is supplied with hard coating for easy cutting. Hardness: 85 shore a temperature range: -40°C to 100°C available dimensions: up to 1060 mm diameter. Application: at standard hydraulic conditions up to 25 MPa

H - NBR Hydrogenated-Acrylnitryl-Butadien Rubber Abrasion resistant seal material High elasticity means easy installation. The semi-finished material is supplied with hard coating for easy cutting. Hardness: 85 shore a temperature range: -40°C to 150°C available dimensions: up to 600 mm diameter. Application: at standard hydraulic conditions up to 25 MPa.

EPDM ethylen-propylen-diene-rubber peroxyd cured epdm, which is especially developed for breakfluid`s application. Highly resistant to weathering, ozone and aging. Not resistant to mineral oils. Not food graded! The semi-finished material is supplied with hard coating for easy cutting. Hardness: 86 Shore A Temperature range: -50°C to 130°C, short term 150°C (steam short term 200°C) available dimensions: up to 600 mm diameter, ask for other dimensions! Application: hot water, steam and diluted acids, break fluids DOT 3, DOT 4 and DOT 5.

EPDM-ktw ethylene-propylene-diene-rubber sulphur cured epdm which is fda-listed. Especially developed for food grade application! Highly resistant to weathering, ozone and aging. Not resistant to mineral oils. The semi-finished material is supplied with a hard coating for easy cutting. Hardness: 87 shore a temperature range: -50°C to 100°C, short term 120°C (steam short term 180°C) available dimensions: up to 535 mm diameter, ask for other dimensions! Application: hot (drinking) water, steam

EPM Ethylene-propylene-rubber peroxyd cured epdm, which is especially developed for breakfluid`s application. Highly resistant to weathering, ozone and aging. Not resistant to mineral oils. Not food graded! The semi-finished material is supplied with hard coating for easy cutting. Hardness: 86 shore a temperature range: -50°C to 130°C, short term 150°C (steam short term 200°C) available dimensions: up to 600 mm diameter, ask for other dimensions! Application: hot water, steam and diluted acids, break fluids DOT 3, DOT 4 and DOT 5.

FPM fluorine rubber (viton) highly resistant to heat and chemicals. The semi-finished material is supplied with hard coating for easy cutting. Hardness: 85 Shore A Temperature range: -20°C to 200°C Available dimensions: up to 600 mm diameter application: at standard hydraulic conditions up to 25 MPa.

POM polyoxymethylene (acetal) high pressure and extrusion strength good cutting properties low water absorbtion temperature range: -40°C to 100°C Available dimensions: up to 350 diameter application: guide rings, back up rings colour: white

PA polyamide (nylon) high pressure and extrusion strength, however more difficult to cut. Temperature range: -40°C to 100°C available dimensions: up to 600 mm diameter application: guide rings, back up rings colour: nature (yellow/white)

PTFE virgin polytetraflourethylene super chemical resistance. Extremely good gliding properties Can be used in contact with food. Temperature range: -260°C to 260°C (short term 320°C)

PTFE-filled I glas mos2 polytetrafluorethylene ptfe filled with 20% glas and 5% MoS2. A material especially developed for hydraulic applications with extreme extrusion resistance at high tear strength. The special mixture of the fillers enable the production of sharp seal lips offering high quality sealing. Temperature range: -200°C to 260°C

PTFE filled II bronze 40% polytetrafluorethylene ptfe filled with 40% bronze and pigments. Technically similar to ptfe -glass mos2, because of higher specific gravity more expensive. Standard compounds are also available ptfe/carbon ptfe/graphite ptfe/glassfiber

PTFE D05 Polytetrafluorethylene PTFE filled with 1% pigment (and for your choice 15 % glass) Super chemical resistance. Extremely good gliding properties and higher resistance against split-extrusion to comparison with PTFE virgin. Temperature range: -260°C to 260°C, (short term 320°C)

PTFE D46 Polytetrafluorethylene PTFE filled with 47% bronze and pigment. Technically similar to PTFE II, but optimized Temperature range: -260°C to 260°C (short term 320°C)

PTFE Carbon Polytetrafluorethylene PTFE filled with 24% carbon and 1% graphite self-greasing. Temperature range: -260°C to 260°C (short term 320°C)

SILICON Methyl-Vinil-Silicon Rubber MVQ High elasticity means easy installation. Highly resistant to weathering, ozone and aging. High electrical insolation. The semi-finished material is supplied with a hard coating for easy cutting. Hardness: 85 Shore A Temperature range: -60°C to 220°C Available dimensions: up to 400 mm diameter Application: at standard hydraulic conditions up to 25 MPa.

We are one of the leading manufacturers and exporters of a wide array of critical rubber components. Our array include  hydraulic seal kits, molded rubber gasket, precision rubber parts, foam rubber cushions, gas seal, guide rings, piston seal, rod seals, wiper, rotary seals, rubber cushions, moulding unit, machining of a seal and oring. These are widely used in chemical, fluid power, offshore, steel, food, and construction industry.

Our assortment of rubber components is widely appreciated for following features:

• Application specific designs
• Dimensionally accurate
• Durable
• High tolerance
• Longer functional life
• Excellent finish

We can also customize our range, as per the specifications provided by the clients. The customization is purely done based on samples and drawings that are provided by the clients.

We follow a strict quality management in ensuring our array of gaskets, bellows, hydraulic seal kits, molded rubber parts, molded rubber gasket, foam rubber cushions, molding rubber parts, metallic oil seals and metallic wipers conforming to the international standards of quality. For maintaining defined finish quality standards, our quality managers keep a strict eye on the entire production procedures right from the selection of raw material to the final shipment.

The tests conducted on the range allow us to check end components on following parameters:

• Tolerance
• Durability
• Flexibility
• Dimensional accuracy

These tests are conducted using sophisticated testing equipment in order to make sure that the range matches the international standards of quality.

Apart from offering our standard range of piston seal, molded rubber parts, foam rubber cushions, hydraulic seal kits, molded rubber gasket, rod seals, wiper and rotary seals. We can also customize them as per the specific requirement of the clients. We have an expert who has a great experience in designing thee rubber components in the most efficient manner. We customize the array on the basis of shapes, sizes and dimensions. All the specifications can be provided to us in the form of drawings and samples. This helps us in acquiring utmost satisfaction from our clients and thus places ourselves in the foremost position.   

Our organization is supported by a team of research professionals whose main objective is to ensure development of our tube components, precision sheet metal and tubing components through innovative techniques. They help us in analyzing the market trends and further comprehend the market dynamics. Our department is equipped with the latest facilities that help our research personnel to conduct their relative researches in an efficient manner.

Our experts carry out a deep research on the new developments on the parameters of raw material, technology, manufacturing process and design. Only after complete assurance of the flexibility and effectiveness of the development, it is recommended to the respective department, for implementation in the development process.

We are well accepted in the industry with dimensionally accurate rubber sealing and allied components.  These can also be customized on specific parameters, as per the requirements of our customers. Last but not the least the products are offered in the leading industrial price and can be supplied in both bulk and small quantity, within the stipulated timeframe.   
 
Some of the reasons why we are the first choice of our clients for rubber components are as follows :

• Ethical business practices with our clients
• Modern manufacturing facility
• Timely delivery of our consignments
• Customization on demand
• Available in the leading industrial price