We offer qualitative gas seal such as dry gas seals that are widely used in the chemical, fluid power, offshore, steel, food and construction industry. The gas seals are manufactured using :
PTFE filled II bronze
PA Polyamide (Nylon)
FPM Fluorine Rubber (Viton)
and related materials that are procured from the established and certified vendors. The salient features include:
We are one of the leading manufacturers and exporters of qualitative hydraulic seal kits in various sizes and specifications. These are manufactured using:
C-HPU 72D Casted Polyurethane
C-HPU
C-HPU 55D Casted Polyurethane
H-PU Thermoplastic Polyurethane
These are procured from the established sources. Our array of hydraulic seal kits are extensively used in chemical, offshore and steel industry. These are widely appreciated for their dimensional preciseness, high tolerance, and flexibility and abrasion resistance.
We manufacture and export piston seals and rubber piston seals that are widely used in the chemical, fluid power, offshore and steel industry. These piston seals are manufactured using qualitative raw materials that are sourced from the most reliable vendors. our array of seals are offered in various specifications and sizes.
The salient features of piston seals include:
Dimensionally accurate
Application specific designs
High tolerance
Abrasion resistant
The arrays of piston seals with their specifications are discussed below:
PISTON SEAL
SPECIFICATIONS
DK 101
Asymmetric piston seal for standard applications. Design provides stable fit in the housing ultimate sealing effect over a wide temperature range. Avoids extensive drag pressure. Back to back arrangement with guide rings in between or for double acting pistons or to separate different fluids.
DK 102
Asymmetric piston seal for standard applications. As K01-P but due to design with active backup ring suitable for higher pressure or higher extrusion gaps. K02-PD for short housings
DK 103
O-ring activated, asymmetrical piston seal interference fit on inside diameter maintains stable fit in the housing. Design provides ultimate sealing effect. Especially suitable for short stroke applications (e.g. spindle seals, coupling actuators).
DK 105, DK 205
Asymmetric piston seal, extremely wear resistant, For use in lubricated or dry pneumatic applications. Special design of sealing lip allows retention of initial lubricating film
DK 106
Symmetric piston seal for simple standard application, not recommended for new design (profile K01-p preferred) also for larger cross section, easier to install.
We manufacture and export qualitative rod seals and hydraulic rod seals that are widely used in the industrial segments of chemical, fluid power, offshore, steel, food, and construction industry. These rod seals are offered in varied specifications as per the industrial requirement and widely appreciated for their high performance, sturdiness and dimensional accuracy.
The wide arrays of rod seals with their specifications are mentioned below :
ROD SEALS
SPECIFICATIONS
DS 101
Asymmetric rod seal for standard applications. Interface fit on outside diameter maintains stable fit in the housing. Design provides ultimate sealing effect over a wide temperature range and good back pumping ability. Also used as secondary seal in combination with PTFE-seal type S09.
DS 102 A, 102
Asymmetric rod seal for standard applications as S01-P, but due to design with activate back-up ring suitable for larger extrusion gaps or higher pressure range. S02-Pd for short housing.
DS 103
O-Ring activated, asymmetric rod seal for Interface fit on outside diameter maintains stable fit in the housing. Design provides ultimate sealing effect. Especially suitable for short stroke applications (e.g. spindle seal, coupling actuators)
DS 106
As profile S06, but more adoption possibilities for diverse temperatures and media by selection of suitable seal material.
DS 109
O-Ring activated, asymmetric PTFE rod seal, low friction. in tandem design together with double acting wipers for extreme low or high speed or positioning functions as primary seal in combination with secondary S01-P seal with good resistance to pressure shocks used in mobile hydraulics, machine tools.
We manufacture and export a wide array of rotary seals that are widely used in various industrial segments. These rotary selas include chemical, fluid power, offshore, steel, food and construction industry. These are offered in various models. These rotary seals are integrated with backup rings for pivoting motion in hydraulic systems.
Some of the salient features include:
Dimensionally accurate
Sturdy construction
Durable
Abrasion resistant
Some other rotary seals with their specifications are described below:
Rotary seals
Specifications
DR 1
Spring loaded lip seal with retainer ring for press-fit installation into axially open housing. Good adaptation possibilities for diverse temperature and media by selection of suitable seal material. Wide range of applications in every sector of industry. Mainly as protecting element for bearings.
DR 3
Rotary seal with integrated backup rings for pivoting motion in hydraulic systems. Interference fit on outside diameter maintains stable fit in the housing back-up rings permit larger extrusion gap/ higher pressure. Mainly used for rotary pivots on excavator, grabs.
DR 4
Space saving rotary seal for pivoting motion in hydraulic systems. Interference fit on outside diameter maintains stable fit in the housing. Dynamic sealing lips on inside diameter.
DR 5
Space saving rotary seal for pivoting motion in hydraulic systems. Interference fit on outside diameter maintains stable fit in the housing. Dynamic sealing lips on inside diameter.
We are one of the leading companies engaged in manufacturing an array of rubber mouldings such as precision rubber parts, molded rubber gaskets, rubber oil seals and many more. We specialize in a wide variety of rubber moldings of varied sizes and specifications, from simple to complex geometry for different services. The molded rubber parts weighs from 0.1 gms to several kgs. All the classifications of polymers are extensively used for manufacturing molded rubber moldings and molded rubber parts.
All the rubber molded parts are manufactured in the molding unit. For sealing and isolating an enclosure, a diaphragm which is a flexible membrane is attached. The flexible property of this seal permits pressure effects to cross the barrier but not the material being contained. Frequent uses for diaphragm seals are to protect pressure sensors from the fluid whose pressure is being measured. Diaphragm seals (also known as chemical seals) are also used to protect a process fluid from the pressure sensor.
Some of the examples of this use include :
Sanitary processes (food, pharmaceuticals, etc.) where allowing process fluid to accumulate in the pressure port of the sensor would compromise the purity of the fluid (such as milk getting into the pressure port of a pressure gauge and spoiling)
Very pure process fluids, where the metal surface of the pressure sensor might contaminate the fluid (such as copper ions from brass leaching into ultra pure water.) Pneumatic systems where small changes in pressures must be eliminated, such as those controlling air bearings.
Some of the rubber components that are manufactured using this molding process include :
Shreeram Engineering Enterprise Mumbai Exporter and supplier of oil seals such as outside metal cased oil seals, metal closed type oil seals, engine oil seals, silicone oil seals, moteurs industriels, viton oil seals and neoprene oil seals.
Processing...
