Powder Extinguisher

Dry powder extinguisher are highly effective for B & C class fires, specially for combating three dimensional or running fires involving inflammable liquids like petrol, paints, solvents or industrial gases. They can also be used on energised electrical equipments. Powder based extinguisher knocks down fire by beating & displacement of air.

Special Features

Capacity	5kgs	10kgs	25kgs	50kgs	75kgs
ISS No.	2171		10658
Jet range (in mtrs.)	4	6	6	8	10
Jet maintain for min.m-sec.	15	23	25	40	50
Discharge time - sec.	15-20	23-30	25-30	40-50	50-60
Minimum % of discharge	85	85	85	85	85
Empty Weight in kg.	5.2	8.2	38	58	66.5
Full weight in kg.	10.2	18.2	63	108	141.5

Technical Specification

• As per IS Specif cation & Capacity : DCP, cap : 5kgs. S 10kgs. as per IS Spec: 2171 & higher cap. 25kgs. 50kgs. & 7Skgs as per IS Spec 10658
  
• Approval : DCP 5kgs. & 10kgs. approved & certified by BIS with ISI mark.
  
• Construction : Body CRCA Sheets, IS : 513
  
• Cap : Brass forging
  
• Anti- Corrosive treatment : Body Coated with epoxy powder coating / phosphatised.
  
• Hydraulic test : Carried out at 30 kg/cm² as per IS norms.
  
• Charge : Dry Powder Sodium Bi-Carbonate base and Co2 gas cartridge is fixed with each extinguisher.
  
• Finish : Fire Red Epoxy polyester powder coating/Painted in Synthetic enamel fire red.
  
• Accessories : Wall mounting brackets. (Higher capacity is wheel mounted)
  
• Maintenance : The fire extinguisher must be maintained as per IS :2190 for satisfactory performance.
  
• Operation : Keep the KANEX extinguisher upright. Remove the safety clip & strike the knob. Direct discharge to fall on the base of the fire.
  

DCP extinguishers are also available in squeeze grip type.

SUITABLE FOR :
Class  "A"  Fire
Class  "B"  Fire
Class  "C"  Fire

This is a premium range of appliances available in ABC powder extinguisher, pressurised with dry nitrogen gas. The contents are expelled by the release of pressure stored inside the body. The inbuilt pressure gauge indicates its readiness for use. ABC powder is one oi the most versatile and highly effective agents suitable to combat fires involving wood, inflammable liquids, gases and electrical wiring. This extinguisher knocks down (ire by beating and displacement of air.

Special Features :

Capacity	1 kg.	2 kgs.	5 kgs.	10 kgs
ISS No.		13849
Jet range (in mtrs.)	2	2	4	6
Jet maintain for min.-sec.	8	8	15	23
Discharge time – sec.	8-10	8-10	15-20	23-30
Minimum % of discharge	85	85	85	85
Empty Weight in kg.	1.3	1.7	4	7
Full weight in kg.	2.3	3.7	9	17

Technical Specification :

• IS Specification : IS: 13849 latest revision.
  
• Approval : ABC Extinguisher approved & certified by BIS with ISI mark.
  
• Capacity : 500gms, 1kg, 2kgs, 5kgs, 10kgs.
  
• Construction : Manufactured out of CRCA sheets in all welded construction.
  
• Valve : Brass forged/gun metal.
  
• Hydraulic Testing : 30kgf/cm²
  
• Charge Pressure : <=15kgf/cm²
  
• Charge : Dry Powder MONO AMMONIUM PHOSPHATE base.
  
• Finish : Epoxy polyster powder coated
  
• Accessories : Wall mounting brackets.
  
• Maintenance : The KANEX fire extinguisher must be maintained as per IS: 2190 for satisfactory performance.
  
• Operation : Pull out safety pin, detach hose from the bracket, squeeze the lever and aim the jet at the base of fire in a sweeping motion.