The features of oil expellers ( palm kernal expeller, palm kernal screw press )are :

Construction :
To ensure perfect stability the bed is fabricated from extra thick M.S. plates, properly machined to ensure perfect alignment & facilitating erection on proper foundation.

Kettle :
The steam round kettle is of M.S. extra thick plate construction with welded seams & hydraulically tested & fitted with all steam fittings i.e. steam safety valve, pressure gauge and other valves.

Barrel :
(Chamber box) is manufactured from M.S. thick plate suitably machined for assembly of the tempered cage bars & frame bars.

Gear Box :
The gear box is totally closed & made from heavy cast iron casting. The main gear is made from M.S. machine teeth ring mounted on C.I. block. Gear is heavy & in balancing. The evel & pinion are of casehardened steel. All gears are of machine cut and run in oil bath.

The features of oil extraction machinery ( palm kernal expeller, palm kernal screw press )are :

Construction :
To ensure perfect stability the bed is fabricated from extra thick M.S. plates, properly machined to ensure perfect alignment & facilitating erection on proper foundation.

Kettle :
The steam round kettle is of M.S. extra thick plate construction with welded seams & hydraulically tested & fitted with all steam fittings i.e. steam safety valve, pressure gauge and other valves.

Barrel :
(Chamber box) is manufactured from M.S. thick plate suitably machined for assembly of the tempered cage bars & frame bars.

Gear Box :
The gear box is totally closed & made from heavy cast iron casting. The main gear is made from M.S. machine teeth.

These filter presses are very extensively used in oil mills, chemical works etc. Our filter presses are most suitable for cleaning oil drawn from the different expelling plants. The filtering capacity varies with the viscosity of the oil & liquids & with the amount of sediment contained therein.

Filter press consists of chiefly C.I. square plates, mounted parallel on heavy flat M.S. Bars fixed on heavy cast iron stand. All filter presses are supplied with air vessel, cloth clips, cocks, M.S. gutter & best quality belt driven plunger pump at 50 R.P.M.

The oil or liquids pressed by a belt driven plunger pump passes through filter cloth fitted to either side of each plate. All impurities are retained by the filter cloth, the filtered oil leaves the chamber through cocks fitted to each plate & flows where it is collected.

Specification :

Size	Approx Filtration (In 24 hrs)	Motor
12" x 12" x 12 Plates	300 Kg	1 HP
14" x 14" x 14 Plates	1000 Kg	1 HP
18" x 18" x 18 Plates	3000 Kg	2 HP
24" x 24" x 24 Plates	6700 Kg	3 HP
24" x 24" x 30 Plates	8400 Kg	3 HP
30" x 30" x 30 Plates	12-16 Ton	5 HP
30" x 30" x 36 Plates	24 - 25 Ton	7.5 HP
30" x 30" x 36 Plates	24 - 25 Ton	7.5 HP
Plate & Frames Type
30" x 30" x 30 Plates & 29 Frames	19 Ton	7.5 HP
36" x 36" x 36 Plates & 35 Frames	30 Ton	7.5 HP

* The Filtering capacity of our filter press varies with the viscosity of the oil & liquids and with the amount of sediments contained there in.

Fats and oils consist of mixtures of different triglycerides (Esters of glycerol, saturated and unsaturated fatty acids). Crude fats and oils produced by expeller screw press or solvent extraction contain non glyceride impurities. The most important and useful method completely reduces the free fatty acid in the oil by converting them into oil-insoluble soaps. There is also removal of some impurities from oil by direct absorption. By virtue of this process many impurities of treated oil can be reduced.

Batch Neutralizer is controlling the minimum loss of oil during neutralizing. It consists of robust built cylindrical shell bodies with steep conical bottom. There are several atomizers fitted at the top of neutralizer for proper dispersing of caustic lye and hot water for water washing. The neutralizer capacity is designed for processing oil and fats with higher free fatty acid for quicker heating to desired temperature and for effective separation of soap stock. Motor gearboxes are fitted to suit continuous rating and gives trouble free life long service.

We manufacture seed cleaners useful for removal of dust, sand, stones or other unwanted particles form seeds. Removal of sand from seeds enhances life of spares of expellers.
 
The available capacities are from 10 to 50 TPD.

Features :

• Thorough removal of dust, sand, stones or unwanted particles
• Easy to operate
• Custom designed as per oilseed/ nut/ beans
• Helps improving the quality of oil

Magnet at discharge end for removal of iron pieces.

Our range of seed crackers are specially used for soya beans, mustard, rapeseed, sunflower, palm kernel, mahua etc. These are available in capacity ranging from 20 to 300 TPD.
  
Features :

• Chilled cast iron rolls available as per seed & size requirement
• Helps to increase output of the plant
• Reduction in wear & tear of expellers
• Heavy duty fabrication
• Incorporated with shock absorbing systems preventing breakage by iron or other hard particles

We offer a wide range of groundnut decorticator and copra cutter. The decorticator are used for groundnuts, which helps in proper removing of red shell from groundnuts. Further, our decorticator are available in 10 to 30 TPD capacities.  

Features :

• Available in different sizes & construction
• Reduction in residual oil in cakes
• High flow blower
• Proper removing of red shell from groundnuts
• Increased output of oil

In addition, we are also manufacturing copra cutters, which operate in high speed at client's end. These are available in capacities ranging from 10 to 50 TPD.

Features :

• Duly hardened steel blades to provide durable performance
• Available in different sizes & constructions
• Robust fabrication
• High speed processing

Pressing worms and collars : is used in Oil expeller, and Oil mill machinery. We manufacture pressing worms of stainless steel / steel /as per customer requirement.

Hard face worms : are manufactured from EN 8 steel and they are basically used in oil expellers.

Bevel gear and pinion : is used in oil expeller, sugar plants, power presses, etc. We manufacture gears of alloy steel, steel castings and welded gears.

Shaft pinion : is used in oil expeller. We manufacturer high quality shaft pinion to improve the speed and effeciency of oil expeller.

Our range of industrial conveyors such as elevators conveyors and screw conveyors, which are used for feeding of seeds / nuts & cakes into expeller and other cleaning & decorticating machinery. Their usage helps to bring a significant reduction in manpower involved in feeding the seeds & collecting the cakes.  

In addition, the elevator are available in capacities as per the requirement of the plants. Further, our range of screw conveyor are available in capacities of screw & reddler.
 
Features :

• Easy adjustment of chain
• Fabricated in for removable parts
• Available in different sizes
• Option for drive to conveyor by counter system

Chambers : are used in oil expeller. We manufacture high quality chambers, some of our product range are given as below :

• Stability chamber
• Photo stability chamber
• Growth chamber

Cage Bars : Our expertise is in steel cage bar which are case hardened through hardened & hard faced for long life and high quality. Our bars are mainly used for oil expellers. Our rage of bars includes :

• Hard faced cage bars
• Barrel bars
• Lining bars
• Filler bars
• Tapered gib bars

We also manufacture hard faced and hardened cutter plates, knife, blades, cutter spacers.

With the help of our expert workforce, we are designing and developing a wide range of buckets and chains. The chains are used to move cement, coal, or grain in industries. Moreover, our range is manufactured using superior grade raw material to ensure durable performance at client's end. In addition, we also offer the range at industry leading prices.