Pulverizers Mills

Universal Mill are recommended for medium to fine grinding of soft to semi-hard materials. Appropriately sized mill chamber prevents buildup of deposits and blockage of the mill body by fatty & sticky products. Cool powdering operation retain vital properties like colour, taste, flavour etc. to its optimum level. Changeable grinding elements offer versatility to cater applications like pulverising, defiberizing, wet grinding, mixing, deaglomeration, dispersion, hot air drying etc. This is of paramount importance to the user.

Centrally fed material gets powdered step by step between rotor and stator, moving radially outward for a bottom discharge through sieve. Clearance, configuration & grinding element design determines end results.

Plastic Grinding Mill (Screen Type) a system ideally suitable for economical grinding of granules, pallets or pre-cuts. Heat sensitive, elastic and tough materials are handled with ease for excellent powder characteristics to suit ultimate processes. ' results, with increased surface area, higher bulk density and better dispersion quality. Such powders are in use for Master Batch, Rotational Moulding, Textile/ Micro-dot coating & Hot-Dip, Wire Coating and many more applications. Unique auto servo control to monitor feed rate sensing temperature & current, Material is preferred between serrated rotor & liner screen controls the particle size. Cool grinding operation and minimum residual time optimizes productivity and system efficiency. Coarse to medium fine powders (16 Mesh Bss tp -85 Mesh Bss) in single stage system and fine powders (52 Mesh BSS to - 150Mesh BSS) in two stage system, with capacities in the range of 20-300 kgs/hour,depending upon material type, its grade and MFI, with narrow particle size distribution and good flowability. Applications catered in general are PE, PVC, PC, EVA, UHMWPE, SAN, ABS etc. These plastic milling machine is supplied with pneumatic conveying system.

 

Air Swept Mills (Screenless) are recommended for micro fine pulverizing of soft to medium hard ,fibrous and slightly moist materials. Mill is uneconomical where frequent change over of product is required and material is abrasive. Such Impact Mills efficiently handle fibrous materials and products having similar structure. Water circulation jacket is an optional feature apart from different styles of grinding elements.

Axially fed material is swept across the peripher of hammers and whizzer type retainer plate. Grinding action takes place between high speed hammers and serrated liners. Micro fine powder is discharged through a built in blower to a cyclone separator coupled with a dust filter unit. Mills is supplied with pneumatic conveying system.

Specification

 

Air Classifiers, unique in design,classify fine & very fine powder in the range of 150 to 50 microns and also 50 to 5 microns. Off-late, conventional Sieving & Grading Machines are undergoing replacement by Air Classifiers. Largely due to operational convenience cut-size adjustment and dependable end product.

Nature size and shape of the particles determine cutoff limit and accuracy for a given throughput. The right blend of centrifugal and centripetal forces classify the particles effectively. Desired particles get conveyed for discharge, while coarser particles settle down for collection or recycling. Installation can be either in-line with a grinding mill or off-line. Static classifiers are also available for specific applications. All classifiers are supplied with feeding and pneumatic conveying system.

Specification