We offer wide range of Teflon Moulded Components, PTFE Teflon Moulded Components which helps in providing complete protection against the aggressive chemicals and atmospheric acids & offers maximum durability. The PTFE has the property for maintaining the honesty without decomposing to complex forms unlike plastics. Our components are effortlessly machined on all the standard equipments and are used in corrosion resistant and wear resistant applications. The Teflon parts are fabricated with close tolerance with necessary specifications. We also offer following components:
 

• Rings
• Washers
• Gaskets
• Balls
• Bellows
• Valve seats
• Piston rings
• Diaphragms
• Tapes

 Any components required by the customer as per sample, drawing or specification.

We offer CHEVRON packing which is appropriate from medium duty to heavy duty application and it is helpful in designing for sealing rods, pistons, plungers in hydraulic cylinders and in hydraulic presses. Our seal checks, if there is any misalignment between the sealing gaps and also accepts the low and high pressure, vigorous conditions. It has the exclusive and distinctive hinge-like action which helps in allowing immediate reaction even to little pressure changes. Our chevron packing set has individual lip which independently reacts to pressure and automatically affects the seal. The effective seal along the shaft and the multiple lip configurations helps in distributing the pressure. The parakh chevron packing also allows the automatic reaction to pressure shock and overloads.
 
The seal is grouping of:
 

• Base seal
• Center v-ring
• Pressure ring

 
The base seal support the center ring from getting extruded against the high pressures and the center seal is the primary seal which is flexible to hold and high and low pressure. The pressure ring helps in maintaining the center ring profile and distributing pressure equally.
 
Below mentioned are its noteworthy features:
 

• Multi-piece chevron seals set made up of (1+3+1) one base ring
• One or three v-seals and one pressure ring
• Extra center rings to adjust groove height

PTFE / TEFLON is used extensively in Electrical, Electronics
Mechanical, Chemical industry, Hydraulic & pneumatic application due to
Its unique characteristics.
 
High Dielectric strength, low dielectric constant, low dissipation factor
High arc resistance, High volume resistivity, excellent insulating properties
Electrical properties remain constant over a  wide range of temperatures
And  pressures.  Good flexibility & elasticity even at low temperature
Self lubricating, anti-stick, low  thermal expansion. Low co efficient of friction, nonflammable and incombustible, insoluble and impermeable
To almost all solvents up to 300 degree. Excellent resistance to chemicals
Organic solvents, acids and  alkalis. Non-toxic, biologically inert. Difficult
To wet. Very low water absorption. Good resistance to uv radition

We offer wide range of PTFE Teflon Moulded Components that includes teflon bushes, teflon rods and teflon sheets which helps in providing complete protection against the aggressive chemicals and atmospheric acids & offers maximum durability. The PTFE has the property for maintaining the honesty without decomposing to complex forms unlike plastics. Our components are effortlessly machined on all the standard equipments and are used in corrosion resistant and wear resistant applications. The Teflon parts are fabricated with close tolerance with necessary specifications. 

Rod  Dia 4.0mm to 200mm
LENGTH ; 100mm/ 300mm / 1000mm long.
 
SKIVED SHEET : 0.2/0.25/0.5/0.8/1.0/1.5/2/2.5/3/4/5/6mm thick
             Width    ;5.0mm to  300 / 450 / 600 / 1000 /1200 / 1500 / 2000mm.
                           Any width
 
MOLDED SHEET ; 1.5 mm to 30.0mm thick
                  Width  ;  300 x 300 /400 x 400 /450 x 450 /500 x 500/600 x 600
                                1000 x 1000 /1200 x 1200 /1500 x 1500mm.
 
MOLDED BUSH ;  Inner dia 6.0 mm to 200.0mm
                               Outer Dia 10.0mm to 300.0 mm
                       Length / thick  : 0.5mm to 100.0mm
 
TUBE ;  Inner Dia 0.25mm to 21.0mm, Outer Dia 0.50mm to 23.0mm
 
PTFE / TEFLON BALLS ; Dia  6.0mm to 19.0mm
 
GASKETS: ( ENVELOPES –ASA NO 150 ( 0.5 0.5 Thick )
                  Size : NB ½”  to 24”
 
CUT GASKET : ASA NO 150 ( 1.5mm/ 2.0mm / 3.0mm Thick )
                 Size : NB ½” to 12.0”.
 
PTFE BELLOWS : ½” TO 12” X  67.5mm Long.
 
BACK UP RING / O RINGS ; Dia 10.0mm to 300.0mm any diameter.
                              Thickness : 0.5mm to any thickness.
 

We are engaged in manufacturing ball valve seat which is known for effective functioning among our valued clients. It is highly appreciated for its high durability and heat resistant features. Moreover, our Ball valve PTFE and metal seat rings is extensively used in following areas:
 
Chemical
Petrochemical
Pipe lines
Valve industries and stations for natural gas and in oil extraction wells
.  To meet increasing stringent operating performance
Conditions, higher pressure and more aggressive chemical environments, less maintenance, longer life and low friction, no leakage resulting in lower
Maintenance cost. 15.0mm dia to 300.0mm dia

We offer wide range of PTFE Teflon Moulded Components which helps in providing complete protection against the aggressive chemicals and atmospheric acids & offers maximum durability. The PTFE has the property for maintaining the honesty without decomposing to complex forms unlike plastics. Our components are effortlessly machined on all the standard equipments and are used in corrosion resistant and wear resistant applications. The Teflon parts are fabricated with close tolerance with necessary specifications.

40 to 60% Thermally conductive bearings, and rod seal / piston seal / slide ring, hydraulic systems, load bearing pads,slide
Ways.

Following are its salient features:
 

• Temperature resistant
• Uniform hardness
• Excellent surface finish

We provide carbon filled bushes and carbon filled PTFE sheet which helps in raising the thermal conductivity and requires less carbon fiber than the glass fiber to attain the same effects. Furthermore, it can be easily customized in accordance with client requirement and is delivered on time. Following are its noteworthy features:
 
Reduces creep
Increases flex and compressive modulus
Increase hardness
Inert to HF and strong alkalis
Increases wear resistance


Seals and bearings with improved wear resistance in water, compressor rings, rod packing in compressor.
Dynamic applications at high speed, spacer packing for valves. Used  when
In contact with a medium or soft mating surfaces to avoid abrasion

We offer Turouiose Sheet for machine tool which is renowned among our valued clients for effectual functioning. It is extensively used in aerospace, automobiles, cement, electrical and other allied industries. Moreover, it is manufactured in compliance with international standards and is delivered within stipulated time frame.
 
To meet increasing operating performance of machine tool  guide ways. Due to high resistance to compression, support
Slides for heavy loads, vibration etc.
Size : 0.5mm thick to 3.2mm thick, and 5.0mm wide to 100mm wide with one
Side chemical treatment ( sodium etching ) for adhesion.( any size, cut pices)

We supply ring piston seal which is known for effectual functioning among our valued clients. Fabricated from good quality of raw material, it is extensively used in cement, mining and fertilizer industries. This is also used for different types of compressors, which includes:
 

• Piston Ring
• Wear Ring

We supply Teflon billet which is highly acclaimed for tensile strength, dimensionally accurate and good surface finishing features. It is extensively used in automobiles, cement and other allied industries. Moreover, it can be easily customized in accordance with client requirement and is delivered within stipulated time frame.

We provide glass filled bush which helps in improving the wear characteristics of PTFE and is widely used in heavy engineering & fertilizers industry. Moreover, it can be easily modified in accordance with client necessity and is delivered within stipulated time frame. Below mentioned are its salient features:
 

• Reduces creep
• Chemically stable (except to strong alkalis and hydrofluoric acid)
• Performs well in oxidizing environments

15 to 25% - Piston rings, Valve seat, slide and sleeve bearings.Excellent in high wear applications, where good chemical resistance is important, good creep resistance for applications where load
Is a consideration, performs well in contact with high hardness surfaces-
Valve seats.