We use high grade cast iron and bronze to manufacture these pumps and the flanges are designed as per DIN 2532 / 2533 standard (On the request of the client flanges can be drilled as per ANSI / BS standard). For the lubrication oil is used and on the request of the client grease lubrication can be performed. These pumps operate in clockwise direction when viewed from drive end. The highlighting features of these pumps are

• Low NPSH
• Noise & Maintenance FREE
• Shaft deflection below 0.05mm
• Bearing Life - more than 17000 operating hours

Applications:

KPWP type pumps are used in air-condition, plants, fire fighting application, food industry, sugar industry, dyeing units, paper & pulp industry, steel plants, sea water desalination plants, power stations and absorption plants in environmental engineering & etc. Also these are used in handling of all types of clear non -aggressive water, condensate water up to 90^oC, Irrigation, General water supply in agriculture.

Design

These pumps are designed in horizontal, radial split, single stage volute casing pumps in back pull out design. Also there is closed impeller construction with two deep groove ball bearings on pump end, drive end and designed in accordance with DIN 24255/ EN 733. The KPWP model consists of 32 pump sizes. Entire range of pump covered with THREE shaft sizes and maximum interchangeability.

Operating Range

Capacity	Up to 550 M3/Hr
Head	Up to 100M (330 Feet)
Speed	Up to 2900 RPM
Temperature	Up to 90oC
Pressure	Up to 16Kg/cm2 (227 Ibs /sq.in)
Pump Size	DN 32mm to 150 mm

Vertically arranged centrifugal pumps type KP-VER is manufacture using high grade cast Iron, WCB, CF8, CF8M, SS317, CD4MCu, ALLOY20, HASTALLOY 'B' &'C' and is suggested in all cases where space is constraint for the installation. Furthermore, if there is any risk of flooding they also provide safety for the motor. These pumps are commonly used for sewage water supply in effluent disposal and have features such as.

• Self Priming
• Simple Mounting
• Noise & Maintenance Free

Application

KP-VER type are used in chemical & petrochemical industries, food industries, sugar industry, paper & pulp industry, fertilizer units, granite units etc. They find wide application in transferring the liquid below reservoir or from the tank and also used in handling of all types of clear liquids, acids, dyes, hydrocarbons, slurries, waste water, & etc

Design

These are designed in vertical suspended with closed and semi open impeller construction for wet and dry pit applications. We have installed overhang impellers up to 2 meters submersion depths, inter mediate bush bearing support for submersion over 2 meters.

Operating Range

Capacity	Up to 600 M3/Hr
Head	Up to 120M(465Feet)
Speed	Up to 2900RPM
Temperature	Up to 100oC(120o F)
Pressure	Up to 24kg/cm2
Pump Size	DN 25 mm to 300 mm

The SAE Engine pump is a 4" X 3" centrifugal pump with an SAE 5 housing adapter for direct coupling to engine driven systems. The pump is direct couple and therefore it has no coupling and alignment problems. It also has victaulic couplings that make the installation & maintenance simple by using a 12"crescent wrench. The horse power requirement to run the engine pump @ 750 GPM is 24 H.P. The highlighting features of this pump are:

• Direct Coupling to Engine Driven
• Simpler pedestal base mount
• FIBER Shaft packing
• Mechanical Seal Sealing
• Rotation of pump is counter clock wise (CCW) from drive end
• Pump has no threaded ends

Operating Range

Capacity	Up to 850 GPM
Head	Up to 180 Feet
Speed	Up to 2600RPM
Impeller	Cast Iron
Casing	Cast Iron
Pump Size	4" x 3"

We manufacture mixed flow pump using high grade cast Iron and Bronze. The flanges provided are as per BS 10 table D&E. The Shaft Sealing of the mixed flow pump is done using uncooled stuffing box that helps in the sealing of internal/external liquid. We can also provide our clients with a special model having mechanical seal. The highlighting features are:

• Low head and high discharge
• Steady flow
• Low NPSH
• Noise & maintenance free

Application

KPMF type pump is used in Paper & Pulp Industry, Chemical & Petrochemical Industries, Food Industry, Sugar Industry, dyeing units, Sea water Desalination plants, power stations, Steel plants and Absorption plants in environmental Engineering & Etc. This is also used in handling of all type of clear non-aggressive liquids turbid or slightly contaminated liquids, raw water sewages, Sea water, low concentration cellulose suspensions etc.

Design

It has a horizontal back pull out design, semi open impeller construction with one cylindrical roller bearing on pump end, one double row angular contact ball bearing on drive end.

Operating Range

Capacity	Up to 3300 M3/Hr
Head	Up to 40m(131 feet)
Speed	Up to 1450 RPM
Temperature	Up to 100o C(212o F)
Pressure	Up to 16 Kg/cm2
Pump Size	DN 200 mm to 450 mm

Stock pumps are manufacture using high grade Cast Iron, WCB, CF8, CF8M, SS317, CD4MCu, ALLOY 20 and HASTALLOY 'B' & 'C'. The shaft seal is done using soft packet stuffing box and mechanical seal can be provided on the client’s request. It also has a KPPS + C closed impeller and KPPS open impeller. The direction when viewed from coupling end appears to be clockwise. The highlighting features are.

• Low NPSH
• Noise & Maintenance Free
• Shaft deflection below 0.05 mm
• Take the pulp as water
• Simple external adjustment for impeller wear

Application

KPPS type pumps are used in paper & pulp industry, chemical & petrochemicals industries, food industry, sugar industry, dyeing units, sea water desalination plants, power stations, absorption plants in environmental engineering. These are also used in handling of pulp & paper stocks up to 5% consistency, heavily contaminated liquids, raw sewages, chlorinated water & etc.

Design

Designed in accordance with DIN24256, it has a horizontal back pulled out design. Closed and semi open impeller construction with one cylindrical roller bearing on pump end, one double row angular contact ball bearing on drive end and.

Operating Range

Capacity	Up to 1400 M3/Hr
Head	Up to 150 M(495Feet)
Speed	Up to 2900RPM
Temperature	Up to 140oC(284o F)
Pressure	Upto 22kg/cm2
Pump Size	DN 80mm to 350 mm

Use of high grade Cast Iron,WCB,CF8,CF8M, CF3M, CD4MCu, ALLOY 20 and HASTALLOY 'B'&'C' has been made as raw material.The flanges of these heavy duty pumps are oil lubricated and are designed as per ANSI B 16.1 CLASS 150 LBS FF, ANSI B 16.5 CLASS 300 LBS FF and can be drilled as per DIN standard on the client’s request.The shaft seal is done using either soft packet stuffing box or else mechanical seal can also be provided on the client’s request.The highlighting features are:

• Low NPSH
• Noise & Maintenance Free
• Shaft deflection Below 0.05 mm
• Bearing life-more than 17000 operating hours
• Simple external axial adjustment for impeller wear

Applications

KPACH type pumps are used in chemical & petrochemicals industries, fertilizer units, food industry, sugar industry, dyeing units, paper & pulp industry etc. Also Its semi open impeller design allows handling of all types of Acids, Alkalis, Dyes, Hydrocarbons, Corrosive Slurries, Green & Black liquor, Chlorinated Water, Back water pulp (consistency up to 2%) & etc.

Design

These have horizontal, radial split, single stage volute casing pumps in back pull out design. Semi open impeller construction with one cylindrical roller bearing on pump end, one double row angular contact ball bearing on drive end and designed in accordance with ANSI B 73.1. The KPACH model consists of 32 pump sizes. Entire range of pump covered with three shaft sizes and maximum interchangeability.

Operating Range

Capacity	Up to 700 M3/Hr
Head	Up to 180 M(598 Feet)
Speed	Up to 3600 RPM
Temperature	Up to 300oC(212o F)
Pressure	Up to 24Kg/cm2 (340.8 Ibs /sq.in)
Pump Size	DN 32mm to 200 mm

The flanges are provided as per DIN 2533 PN16 for CAST IRON Gr 20 IS 210,DIN 2543 PN16 for alloy steel material and can be drilled as per ANSI standard on the client’s request.We make use of high grade Cast Iron,WCB,CF8, CF8M,CF3M,CD4MCu,ALLOY 20 and HASTALLOY ''B'&'C'.The direction when viewed from coupling end appears to be clockwise.The highlighting features are:

• Low NPSH
• Noise&Maintenance Free
• Shaft deflection Below 0.05 mm
• Bearing life more than 17000 operating hours
• Casing cover cooling or Heating is possible

Applications

KPCP type pumps are used in Food Industry, sugar industry,dying units,paper&pulp industry,sea water desalination plants,power stations,chemical&petrochemicals industries,absorption plants in environmental engineering.Also its closed impeller design is suitable for pumping all types of clear Liquids,Acids,Dyes,hydrocarbons,Chlorinated Water,Back Water,Pulp(Consistency up to 1%) etc.Versatile for hot water recirculation pumping lines in closed loop tank systems.The JACKETED type pumps with heating elements are ideal for handling liquids,which turn too viscous and forms crystal at lower temperatures.

Design

It has Horizontal,radial split,single stage volute casing pumps in back pull out design.Closed impeller construction with one roller bearing on pump end,one double row angular contact ball bearing on drive end and designed in accordance with DIN 24256 / ISO2858 / ISO5199.The KPCP model consists of 32 pump sizes.

Operating Range

Capacity	Up to 600 M3/Hr
Head	Up to 140M(465 Feet)
Speed	Up to 3600 RPM
Temperature	Up to 300oC(212o F)
Pressure	Up to 24Kg/cm2(340.8 Ibs/sq.in)
Pump Size	DN 32mm to 200 mm