Fully automatic non IBR boiler supplied by our company is famous among our clients for maximum efficiency, dependability, easy operation. Our range of the steam boilers is greatly demanded for their cutting edge features and special design. It is available in different models and has following silent features:

Salient Features:

• Non IBR Boiler – Maxsteam is exempted from Indian Boiler Regulations.
• Reverse flame technology – Ensures complete combustion.
• Consistent Thermal efficiency of 88% - Ensures low fuel bills
• Fully automatic – Dedicated Boiler attendant not required
• Large tube diameter of coil – Ensures longer coil life
• Multi fuel options – Suitable for HSD/LDO/FO/LPG/Natural Gas
• High unit dependability – All critical components are of reliable make.
• Easy to operate – critical components are accessible for easy maintenance.
• No separate boiler house required – can be installed closed to process equipments.
• Skid mounted – easy to install
• No separate boiler house required – can be installed close to process equipments
• Installing options – (Vertical / Horizontal) for all models.
• Prompt services & spares support, less down time

Built in Safeties and Controls:

• Water level (Low / No) Alarm
• Steam Temperature High Alarm
• Fuel Temperature Low Alarm (For FO unit only)
• Blow Down Valve Open Alarm
• Flame Sensor
• Feed Water Pump Electric Inter Lock
• Sprint Loaded Safety Relief Valve for High Steam Pressure
• High Steam Pressure Switch – Burner On / Off

We supply technically proficient Semi Wet Back Steam Boiler that is extensively used in various manufacturing industries. Our exotic range is incorporated with following features:

Salient Features

• Factory-assembled horizontal packaged boiler
• Less site work and quick commissioning
• Large integral furnace – minimum heat losses
• Suitable for solid fuel, wood and briquette fuels
• Easy access for inspection and cleaning
• Induced draught – no interruption of air supply during fuel feeding and de-ashing
• Three pass heat transfer – optimum heat recovery
• High turn-down ratio
• End-to end visibility of tubes
• Large steam releases surface
• Quick and easy de-ashing
• Efficiency module to increase efficiency
• Manual firing – less complexity

The world's one of the largest ranges of efficient heat exchangers is available for a wide variety of applications. Module based concept is behind the manufacturing of the heat exchangers. Prime components of heat exchanger are Frames, plates and connections. By using different types of plates, with different characteristics, the exchangers can be adapted to a wide variety of applications. The exchangers can easily be taken apart for inspection, cleaning and maintenance. Another benefit of the gasket plate heat exchangers is that they can easily be expanded or adapted, by adding or replacing plates, when the conditions change. Our range is available with following features:

Flow range	10-4600 M3/h
Working Pressure	10-25 bar
Temperature range	-20ºC 180ºC
Connection	DN25-DN500 Weld neck, flange or threaded

Gasketed Plate Heat Exchangers:
 
There are some of the following plates which are widely used for manufacturing of heat exchangers by our manufacturers:

GC and GL Plates:
 
Theses are symmetrical plates for regular use. Different plate patterns allow for optimization of thermal transfer or pressure drop. An obtuse angle (high-theta plate) gives high resistance and an acute angle (low-theta plate) a low pressure drop.
 
GX Ultraflex Plates:
 
The plates are available with a herringbone pattern and either an acute or obtuse angle, making it possible to achieve six channel combinations. The Ultraflex design allows the two plates to be turned and rotate, giving six combinations of high – and low theta plate pairs, matching the performance parameters of your application. Ultraflex allows asymmetrical designs, with the primary and secondary circuits designed for heat transfer efficiency.

Cooling towers are heat removal devices used to transfer process waste heat to the atmosphere. Our range is completely fan less and is excellent in working. It is energy efficient cooling tower with very low maintenance. Assortment of cooling towers has following applications and features:

Applications :

• Air Conditioning & Refrigeration Plants
• Chilling Plants
• Air Compressors
• D.G. Sets
• Plastic Moulding Machines
• Process Cooling etc.

Salient Features

• Aesthetic & elegant look
• Totally maintenance free
• Light – weight & compact design
• Algae / Corrosion / Deposit free
• Lower power consumption
• Universal orientation

DeW - Pond offers fiberglass reinforced plastic (FRP) cooling towers incorporating latest technological developments ensuring trouble free and most cost effective operation for the lifetime of cooling towers.

Note :

• Capacity is based on temperature drop of 5ºC (i.e. From 37ºC to 32ºC at design WBT of 28ºC) and water flow rate of 13 LPM per TR.
• Cooling towers can be offered without cold water basin if required.
• All civil/electrical / plumbing work is executed from our scope.
• Basin capacity as indicated is for standard basin of 300mm depth. Higher capacity basins can be supplied at extra cost if required.
• For C/TS model DPSQ 200 & above, RCC basin is recommended. However FRP basin can be supplied on request.

Dimensional Details :

Model	Cap. (TR)	Overall Size (LxWxH) mm	Fan dia No of Blades	Motor HP /RPM	I/L x O/L	Drain- Cum Over Flow	Make Up	Op. Wt. (Kgs)	Basin Cap. (Lits)
DPSQ- 5	5	750 x 750 x1700	300/6	0.25 /1500	11/4” x 11/4”	½“/½“	½“	165	150
DPSQ- 10	15	900 x 900 x 2000	450/8	0.5 /500	11/2” x 11/2”	½ “/½“	½“	285	250
DPSQ- 15	15	1000 x1000 x 2200	600/4	1.0 / 500	2” x 2”	¾”/¾”	½“	335	300
DPSQ- 20	20	1100 x 100 x 2200	600/4	1.0 /500	2” x 2”	¾”/¾”	½“	370	300
DPSQ- 25	25	1200 x1200 x2200	750/3

Maxpac Solid Fuel Fired Thermic Fluid Heater is automatically operated and is high in efficiency parameters due to larger heating surface. Our range ensures that maximum of its heating surface is exposed to radiant heat there by ensuring excellent thermal efficiency. It incorporates following features.

Salient Features:

• Proven Design
• Fully Automatic
• Maximum outlet temp of 300ºC
• Consistent efficiency of 72%
• High unit dependability
• Suitable for multi fuel (Husk / Firewood / Coal)
• Installation option (Vertical / Horizontal)
• Prompt service and spares support
• Built in Safeties and Controls
• Fluid Level Low

One of the important components is Magnetic Level Switch which ensures minimum thermic fluid level in the dearator cum expansion tank.

• Fluid Flow Low: Different pressure switch ensure sufficient flow of thermic fluid across the coil helping to prevent coil from chocking, coil failure and over heating.
• Outlet Temperature High: Temperature indicator cum controller checks over heating of thermic fluid.
• Return Temperature High: Temperature Indicator cum controller ensures constant temperature for the process and control ID & FD fan operation according to the set temperature.
• Spring Loaded Safety Valve

Vertical Thermic fluid heater is a sensible heat transfer machines used for process heating applications. We are recognized for supplying excellent thermic fluid heaters with best features and designs. Our assortment if characterized with large grate area and higher furnace volume. The company supplies varieties of this heaters range in different designs and following essential features.

Designed as per DIN 4754 ensures:

• Optimum heat transfer
  
• Large furnace volume
  
• Larger distance between flame and coil
  
• Low film temperature
  
• Low tube wall temperature
  

Machine wound coil manufacturing facility ensures

• No hot spot in the coil
  
• Longer heater coil life
  
• Longer thermic fluid life
  
• High quality materials Input
  
• Boiler quality tubes conform to BS 3059 Part I from TISCO & TI Group
  
• All components are of reputed make.
  

Technical Specifications:

Description	Unit	MPW- 01	MPW- 02	MPW- 04	MPW- 06	MPW-10	MPW- 15
Rated Output	Kcals/ hr	1,00,000	2,00,000	4,00,000	6,00,000	10,00,000	15,00,000
Max. Fluid Outlet Temp	Deg.C				300
Fuel				Husk / Wood / Coal
Thermal Efficiency
On Coal					76%
On Wood / Husk					72%
Fuel Consumption
Coal	Kgs/hr	29	58	87	175	290	435