Swimming Pool

With the assistance of competent professionals, we undertake Swimming Pool Construction service. Our professionals use latest equipment and work in proper coordination to construct swimming pool within stipulated time. This construction service is reliable, cost-effective, and rendered as per the requirements of our clients.

While providing this service, we take following points into consideration:

• Legal restrictions and obstructions
• Sun shade and wind exposure
• Access to the pool & pool area
• View of and from the pool

Process of construction in brief:

• Preparing layout of complete pool area
• Excavation up to the desired depth by using man power or machine
• Compaction of excavated area and leveling as per the depth considering construction margin
• Enclosing the area of raft and lean concrete area of the pool with brick work; this helps in preparing layout of swimming pool floor as well as swimming pool wall
• Lean concrete is laid upon the excavated and properly rammed soil
• Laying of M.S. tore steel reinforcement as per the structural design for floor as well as wall
• Raft concrete is laid upon the lean concrete and bottom face of steel reinforcement
• 115mm thick brick wall is provided up to the required height for shuttering purpose
• Shot-crating of 50 mm thick layer upon the raft concrete and top layer of steel reinforcement, casting of wall directly with shot-crated method of 75-200mm thickness as per the structural design requirement
• We provide cantilever slab of 600 mm wide in case of open flow system. For making of overflow channel, cantilever slab is attached to the wall one feet below from the deck level. Balancing tank is also provided that is constructed towards the deep side of the swimming pool
• After this, entire uneven shot-crated surface is leveled
• Cladding with the tiles of entire area of swimming pool walls, floor, and overflow channel
• Afterward, overflow area (between pool wall and overflow channel) is copped with Kota stone that is half rounded and molded towards pool side edge

Types of overflow of swimming pool:

1.Open overflow swimming pool

In this type, filtered water enters either from floor or wall. After filling swimming pool completely, water over flows into a overflow channel that is constructed at deck level along with the pool periphery. Through the channel, the water goes to the balancing tank. After this, the water goes to filter through recirculation pump set. Finally, water comes again into the pool from the bottom.

2.Skimmer Overflow Type Swimming Pool

This type of swimming pool is economical as it does not require any overflow channel and balancing tank. In this system, filtered water inlets are fitted at one side of pool's wall at approx middle height. Skimmer is also fitted at top upon the opposite wall of inlet side. Water is recycled through skimmer and main drain, which are connected directly with the pump. Recycled water goes to the filter and after filtration it enters into the pool through return inlets. In this system, there is always a layer of dust particles and free-board of 100-150 mm, small grass deposited with the wall with water line