Weatherproof Enclosure,Pan And Tilt Head,Weatherproof Enclosure Exporter,Pan And Tilt Head Exporter,India

Enquiry

Our Products

About Us

Home

Our Products

Flameproof Weatherproof CCTV System Equipment WeatherProof CCTV equipment for Steel and Other Engineering Unit Water Cooling Jacket for CCTV Camera & Lens Weatherproof Enclosure for CCTV Camera & Lens with Wiper & Sunshroud in Aluminium Casting Pan & Tilt Head (Heavy duty, High temp)

Showcase

View all our products / services as a slide show.

WeatherProof CCTV equipment for Steel and Other Engineering Unit

Explore our comprehensive range of weather proof CCTV equipment, which find application in steel and other engineering units. Fabricated in sync with ISO, Indian and other benchmarks, our range comprises of water cooling jacket, weatherproof enclosure, pan & tilt head and many more. Our range is easy to install, durable and available as per the application requirements of our clients.

View Enquiry Basket

Water Cooling Jacket for CCTV Camera & Lens

Item Code: WCJ03

Specifications:

Material of Construction: SS sheets of 16, 19 in 316 grade

Nozzles, Pipes, in SS 316 grade,

Rubber Hose for Water & Air circulation suitable for Water and Air Pressure up to 4.5Kg/cm2. Rubber Hoses in ½” & ¼” to withstand Temperature up to 120º C (See attached table below)

Air Purging System Nozzles are provided.

Toughened glass 130 MM Dia. X 12 mm thick

Gasket on front & rear flanges between the BODY and the Covers.

Thermal Insulation between Middle & Outer shell.

Degree of Protection IP: 65 as per IS: 13947 (part-I) 1993

Cable Entry from rear flange Cover is provided.

Ambient Temp. in ºC Where WCJ is installed	Temp. Inside WCJ ºC	Input Water Temp.ºC
{Area 1} 120	Up to 40	Less than 5
{Area 2} 100	Up to 40	Less than 15
{Area 3} 80	Up to 40	Less than 20
{Area 4} 65	Up to 45	Maximum 30

Overall Dimensions: Front (Ø)240 mm X Rear(Ø) 240mm X Length 450 mm

Inner shell Ø140-mm, Mid Shell Ø 190–mm, Outer Shell Ø240-mm

Height from the Ground level 250mm

Add to Enquiry Basket

Weatherproof Enclosure for CCTV Camera & Lens with Wiper & Sunshroud in Aluminium Casting

Item Code: KKWP-06

Weatherproof Enclosure in Aluminum Casting is designed for housing CCTV Camera & Lens. The CCTV camera & lens are installed on the platform provided inside the enclosure. Wiper Enclosure is mounted over the main enclosure. The wiper is used for cleaning the Glass of Main Enclosure when visibility through the camera is poor. Wiper will operate only when the solenoid valve is operated and water is sprinkled on the glass of the main enclosure. There is a provision for heater and Blower kit which is thermostatically controlled to maintain proper Temperature inside main enclosure whenever ambient Temperature falls below 10ºC to avoid formation of mist and hence poor visibility.

Specifications:

Indian Standards to which Enclosure complies Weatherproof Construction IS: 13947 (Part- I) 1993 IP: 65

Construction:

Main Enclosure : Main enclosure, Front Cover, Rear Cover with Platform, Wiper Enclosure in Aluminium Casting, Canopy in Aluminium Sheet Toughened Glass 8 mm Thick 130 mm Ø

Cable Entries: 2-nos of ½” or ¾” NPT / ½” or ¾” ET

Heater Blower Kit: Heater 10 Watts, Blower Fan3”, Thermostat for adjusting Temperature, installed on the platform of the main enclosure, Voltage 240V. 50Hz.

Wiper Enclosure: Enclosure, front & rear covers in Aluminium Casting

Wiper Motor 240V. AC 50Hz. With Gears & shaft.

Cable Entries : 1 cable entry ½” or ¾” NPT /ET trough rear side of the enclosure.

Overall Dimensions: 588 mm (Length) X 350 mm (Height) X 248mm (Width) mounted with Sun shroud/canopy of 788 mm length

Weight: 12 Kg.

Finish: Off white OR Dimond white

Solonoid Valve: For sprinkling water over the front glass to clean it before wiping.

Supply Voltage 240V. 50 Hz. Connections

Input/Output connection to the valve- ½” BSP

Add to Enquiry Basket

Weatherproof Enclosure for CCTV Camera & Lens with Wiper & Sunshroud in Aluminium Casting

Pan & Tilt Head (Heavy duty, High temp)

Item Code: EM-70

SPECIFICATIONS:

Model : EM-70

Pan Angle : / 350 Degrees.

Tilt Angle : + - /90 Degrees.

Back Lash : /6 Degrees

Speed : Pan /6 Degrees per Sec.

: Tilt /6 Degrees per Sec.

Torque :

Pan - 300 Kg. CM

Tilt - 600 Kg. CM

Over Run : None

Supply Voltage : 240 V. AC 50 Hz.

Connections : through 6 core cable.

Construction : Main Body – Aluminium Casting.

Cover - M.S. Sheet Fabricated.

Platform- Cast Aluminium (In two Parts)

Finish - Off White/ Dimond White/Siemens Grey (Powder Coated)

Power Consumption : 250 Watts Max. (Total when Panning & Tilting together)

Load capacity : 25 Kg. Balanced

Overall Dimensions : 220 MM(Height) X 205 MM(Width) X 255 MM (Depth)

(Dimensions likely to change slightly to improve design)

Mounting : Can be mounted on Wall Bracket OR Pedestal Mount.

Applications:
Suitable for Mounting Water Cooling Jacket, Weatherproof enclosure, in CCTV System for Housing Camera & Lens of any type.

Motor Specifications : Synchronous Motors Two nos. one each for Panning & Tilting. Totally Enclosed , Torque: 28- 20 Kg. CM. Phase Splitting by RC Network. Operating Temp. 50 Deg. C.

Weight of the Machine : 19 Kg.

Add to Enquiry Basket

Our Products

Home | About Us | Our Products | Contact Us | Enquiry