|Power Supply||415Volts,3Phase,50 Hz|
|Power||0.75 KW/1 HP|
|Output Speed||100 rpm|
|Max. Reach||2.0 mtr.|
|Max. Weight With Flowing Disk||45 Kg|
|Outer Diameter||550 mm|
|Blades Dimeter||500 mm|
Perfect Roof Floater Equipped with electic motor is hight efficient, light weight machine used for floating concrete surfaces it's compact size and light weight makes it easy to transport.
The motor is connected toa gear box which is specially designed for being compact in size and light weight.
The handle is compact and straight for increasing the mobility.
A floating disk made up of special sheet has been provided for levelling the dewatered concrete to obtain the levelled finish concrete. the disk can fitted in trowel also.
Dewatering Vacuum Pump
|Dewatering Vacuum Pump|
|Pump Capacity||2800 lpm|
|Vacuum Capacity||690mm Hg Max|
|Electric Motor||5.6 Kw/7.5H.P.|
|Power Supply||415 Volte, 3 Phase, 50 Hz|
|Rated Current||10,5 Amp|
|Length X width X Height||1150x660x470 mm|
|Total Weight Of The System||190 Kg.|
|Bottom Mat||7x3 Mtr.|
|Top Mat||7x5 Mtr.|
With the help of this system it is possible to reduce the water cement ratio from the concrete by 15 to 20 percent which greatly increases the compressed strength of the concrete. by Lowering the water-cement ratio the problems of shrinkage and cracking are reduced to the maximum and other properties of the concrete are also taken care of it given the maximum compressive strength at the top of the dewatered slab . this method involves the dewatering of concrete by vacuum process. The extra or surplus water from the concrete is removed after vibration reducing the water cement ratio and increases the compatibility of concrete.
Double Beam Surface Vibrator
|Double Beam Surface Vibrator|
|Height Of Bean||100mm|
|Standerd Length||4.2 & 6.2 Mtr.|
|Weight Of Standard Length||50 Kg.|
|Power Supply||415 Volts, 3 Phase, 50 Hz|
|Rated Current||2.4 Amp|
|Centrifugal Force||6000 N|
Double Beam Surface Vibraror os of alloy section making it very light and hence providing easy transport with very little or no physical labor. Double Beam Surface Vibrator can serve the surposes for both compactiong and levelling the concrete it's beneficial in two ways:-1. Provides optimum vibration, and 2. Provides lasting life Double Beam Surface Vibrator is an aggregation of two parts beam unit and vibrator unit. With a motive to provent the sagging of beam unit resulting due to weight of vibrator unit, tensioning device is provided though out the of the length of the beam unit.
Specially designed water protective mounted on the centre which Produces 2800 centrifugal force, ideal for the compression of concrete.
vibrator unit further consists of extremal vibrator, which is fitted at the centre of the beam unit A provision of reverse and forward switch mounted on a clamp and fixed to one and of beam unit, is also provided.
|Length X Width X Height||760x510x745|
|Water Tank Capacity||40 Ltrs.|
|Power Supply||415 V.3 Phase 5O Hz|
|Electic Motor||7.5H.P./5.6 KWA|
|Rared Current||10.5 AMP|
|Diesel Generator Set Also Be Fitted in Place Of electic Motor.|
Perfect Groove Cutter is a compact mnachine which is used for cutting concrete groove. It's compact design makes it easy to transport.
Vibrations are negligiable due to the design and outer vibrating pads.
water tank is also provided having the capacity of 40 listers of water Adequate water arrangement for the blade is designed in such a way that the water is sprinkled from all the comers cutter without a water take is also being manudactured by us.
|Powe Supply||415 Volts,3Phase,50 Hz|
|Power||1.8 KW/2.5 HP|
|Output Speed||80/120 rpm|
|Max. Reach||2.7 Mtr.|
|Max. Weight With Flowing Disk||95 Kg|
|Outer Diameter||914 mm|
|Blades Dimeter||815 mm|
Perfect trowel p900 equired with elecric motor is high effcient, light weight machine used for floating and trowelling concrete surfaces. The motor is connected to a gear box which is the specialy designed for being compact in size and light in weight. A remakble feature of p900 trowel is the safely grip. the operator hold this safely grip during the operation of the machine and the moment id relaxes it. The machine instantly stops working and the thereby the safely of machine as well as the opertor is ensurd. the handle is compact for increasing the mobility and can also be adjustd in accordance with the operator's height to provide optimal conveniece. There are four blades procided for trowelling it is vital to control's height to provide angle for obtaning fine finish. it is possible to alter the blade angle with the blade angle knob provided on handle while the machine is working.
One special feature of trowelling blades is that are being made reversible and consequently provide service life.
A special attachment has been provided in the machine to use floater disk if needed.
|Powe Supply||415 Volte.3 Phase. 50 Hz|
|Power||1.8 Kw/2.5 ph|
|Output Speed||80/120 Rpm|
|Max.Weight with Floating Disk||95 Kg.|
|Outer Diameter||914 mm.|
|Disk Diamerer||900 mm.|
Perfect floater p900 equipped with elecric motor is high effcient, light weight machine used for floating and trowelling concrete surfaces.
The motor is connected to a gear box which is specially designed for being compact in size and light weight.
A remarkable feature of mP900 floater is the safely grip. the operator hold this safely grip during the operation of the machine and the moment it relaxes it, the machimne instaly working and thereby the safety of machine as well as the operator i ensured.
The handle is copact for increasing the mobility and can also be adjusted in accordace with the operator's with the operator's height to provide optimal convenience.
Afloating disk made up of special sheet has been provided for levilling the decatered concrete to obtain the levelled finish concrete. the disk can be fitted in trowel also.
To,Kethri International Private Limited