We specialised in manufacturing and supplying superior quality PVC/FRLS/HR Insulated Single/Multi Core Cables that are used for wiring purposes. These products are offered under the brand name of K-Flex- conf. to IS 694:1990. Our products is efficient in saving electrical energy and provide protection against electrical shock & short circuit. These products are fabricated using 99.97% pure, electrolytic grade, bright-annealed bare copper with more than 100% conductivity.

Offering wide range of LT PVC / XLPE Power And Control Cables that are offered under the brand name of K-Flex conf. to IS 1554 (Part-1), 7098 (Part -1). PVC insulated power cables are proved to integral all distribution of network.

Our manufacturing unit specialise in offering screen shielded instrumentation cable that are produced from conductor sizes 25/0.5/0.75/1.0/1.5/2.5/4.0 sq. mm, conforming to BS:5308 - I & II, IEC-189, IS:1554 - I:88, VDE 0815. These products are specially designed to transmit signals without any external interference. These comes under the brand name of K-Flex- Conf. to IS 694/BS 5308. All instrumentation products meet the international quality standards.

Range

• Conductor: Solid/ Strandard/ Flexible copper (bare/ tinned)
• Insulation: PVC – HR; PE, LSZH
• Shielding: Individual & overall or overall screen only by Al-mylar tape/copper tape/copper wire braid.
• Inner Sheath: PVC – HR/ FR/FRLS; PE, LSZH.
• Armour (for armoured cables): Galvanized Steel round wire/strip.
• Outer Sheath: PVC – HR/FR/FRLS; PE, LSZH.

Applications

• Data acquisition systems.
• Computer networking.
• PA systems.
• Digital control/measuring & communication systems.

The comprehensive range of PTFE insulated silver, nickel, copper wires are suitable for use from -650C to +2600⁰C. All these products are available under the brand name of K-Flex.

Range

• Hook-up Wires.
• RR Co-Axial Cables.
• Tri-Axial Cables.
• Multi Core Twisted Cables.
• Twisted & Shielded Cables.
• Twisted Shielded & PTFE /PVC Jacketed Cables.
• Double Shielded Cables.
• Multi Pair Cables.
• Twin Parallel Balloon Wire.
• Sleeves.
• PTFE Tape.
• PTFE Hoses.

Features

• Low Dielectric Constant.
• Low Dissipation Factor (<. 0003).
• High Operating Temperature.
• Excellent Thermal Stability.
• Suitable for Wide Frequency Range: DC to Above 10000 MHZ.
• High Surface Resistance.
• Inert to Chemical Attack.
• High Volume Resistance.

Application

• Electronic test equipments.
• Computers.
• Electronic Equipments For Aircraft, Marine, Radar, Satellites.
• Aerospace Research.
• Power Control Equipment.
• Lead Cells & Pressure Transducers.
• Heat Sensing Leads.
• Atomic Power Stations.
• Operating Temperatures.
• PTFE Insulated Silver Plated Copper Wires - 650 to 2650.
• PTFE Insulated Nickel Plated Copper Wires - 650C to 2000C Running Voltage.
• TYPE ET: 250 VOLTS AC RMS.
• TYPE E: 600 VOLTS AC RMS.
• TYPE EE: 1000 VOLTS AC RMS.

Presenting superior quality silicon / EPR / rubber cables from 0.25 sq. mm to 240 sq. mm and are widely used in welding , battery , cranes , elevators and many more. These are available under the brand name of K-Flex -Conf. To IS 9968 (part - 1 ). We specialise in offering customised products as per client's requirements and specifications.

Applications

• Steel Mills


• EOT Cranes


• Airport Lighting


• Ships


• Nuclear & Thermal Power Stations


• Wind Power Mills


• Electrical Machines


• Textile Machines


• Construction Equipments


• Turbines

Our range of thermocouple cables are used to extend thermocouple circuits from the sensor to reference unit. These products are manufactured with conductor sizes 16, 18 & 20 AWG and conforming to IS: 8784, BS: 4937, IEC-584, ANSI: MC: 96.1, DIN, JIS.

Specifications

• Conductor: Solid/stranded.
• Type: KX, VX, TX, JX, EX, SX/RX.
• Insulation: PVC –HR; PE, LSZH.
• Shielding: Individual & overall or overall screen only by Al-mylar tape/copper tape/copper wire braid.
• Inner Sheath: PVC –HR/FR/FRLS; PE, LSZH.
• Armour (for armoured cables): Galvanized steel round wire/strip.
• Outer Sheath: PVC –HR/FR/FRLS; PE, LSZH.

Catering to the diverse requirements of telecommunication industry and various department of telecom industry, we offer products under the brand name of K-Flex.

Range: Polythene (Solid/Foam/Foam Skin) Insulated Jelly Filled Cables (5 Pair to 400 pair).

Description: Twisted pair cable-with solid/foam/foam skin polythene insulated copper conductor, jelly filled, polythene sheathed, bonded poly-Al moisture barrier, unarmored/ armored polythene jacket underground cable.

Application: These cable is meant for inter exchange and for local network use. These cable may be unarmored/armored type.

Overhead Cables & Wires Aerial Cables

Description:Polythene insulated self-supporting aerial cable in which suspension wire & the cable core are contained in a single polythene jacket of a figure of 8 sections.

Application: The cable is intended for use as a telephone distribution cable and would be suspended from posts using fixtures. These are normally used in rural/hilly areas.

PCM Cables

Description: Solid round copper conductor, polythene insulated jelly filled poly-Al moisture barrier bonded polythene sheathed underground telecom cable usable for 2 Mb/s digital System.

Application: These cable is intended as a transmission medium for carrying 2 Mb/s digital signal.

Optical Fiber Cables Central Loose Tube

Description: The cable is of Central Loose Tube (CLT) structure. Single Mode Optical Fibers are placed in a Loose Tube and jelly is applied during the extrusion process. Three FRP’s are embedded in the sheathing

Application: Trunk & Junction Network, T.V. Distribution, Data Links, Telemetry, Short span aerial application on existing open air alignment network.

Our range of AAC/AAAC/ACSR conductors are manufactured from superior quality raw material, these conductors are extensively used for over-head power distribution and sold under the brand name of K-Flex conf. to IS 398 (Part -1). Prior to the delivery, these products are approved by electricity board.

Avail from us wide range of aerial bunched cables under the brand name of K-Flex- conf. to IS 398 (Part -1). These are widely utilized as conductors for over-head power distribution. These cables have high capacitance and low inductance leading to low impedance of lines, lower voltage drop, higher current carrying capacity, vis-à-vis better voltage regulation, easy maintainence and many more.

Applications

• In theft prone areas.
• As replacement of bare lines where reliability of supply is of prime importance.
• As replacement of bare lines where high degree of stability of supply voltage is of importance.
• In hilly terrains where cost of erection of overhead lines of under ground cable becomes very high.
• As reinforcement of existing system without increasing voltage.

These disc type porcelain insulators are used in the power transmission process as safety devices. It helps in smooth transmission and distribution of electrical power. Collaboration with RR industries enable us to market these insulators. These products are available at competent prices.

Applications

• 11 KV Pin Insulators.
• Pin Insulators (Nema Type).
• 22 KV Pin Insulator.
• 33 KV Pin Insulator.
• 11 & 22 KV Post Insulator.
• 33 KV Post Insulator.
• Disc Insulators (B & S Type).
• 11. KV Disc Insulator (T & C).
• 11 KV X 3 = 33 KV Disc.
• Insulator (B & S) Type/70 KN.
• Solid Core Insulator for 11 KV.
• 33 KV Solid Core Insulator.
• 1.1 KV Transformer Bushings.
• 3.6 KV Transformer Bushings.
• 0.66-12 KV Transformer Bushings