Our clients can avail from us premium quality . We use superior quality base material to ensure durability and reliability of Lubrication Greases.
Biodegradable Greases
Rabilub 2
Lubricating grease based on the natural rape-oil, no pollution of the environment, biological decomposition, adhesive, work-stable. for lubrication points, where running-out grease couldn't be removed e.g. at chains, gears especially in the agriculture
For sliding points
-25°C up to +90°C, / +100°C Consistency NLGI 2D3 rapeseed oil Based
Rabilub EP 2
Synthetic, biodegradable greases based on synthetic esters and therefore with much better oxidation stability and lubrication effectiveness
Very adhesive heavy duty chain flow grease for high loaded chains, extremely water repellent, corrosion-proof, applicable under corrosive conditions, a honey-like sticky film .
· for triple chains in building equipment, • chains in fork lift trucks, mills and textile machines, • for chains of motor vehicles, • for high speed industrial powered chains and conveyor belts
-40°C up to +120°C
Sekorex D 00
Synthetic Chain Grease for Long-term Lubrication, biodegradable
· chains in fork lift trucks, mills and textile machines,• for high speed industrial powered chains and conveyor belts,
Chemical Grease/ Chemical Resistance Grease/Gasoline And Solvent Resistent Greases/
Attila G 82 N
Solvent, Fuel, and Gasoline Resistant Grease for sealing and lubricating special lubrication points. Resistant against most common used solvents and fuels, and against mineral oil, gas, water, and most of the chlorinated solvents too. The contained tackiness prevents, respectively removes vibrations and noises
for lubrication of bearings, if they can contact fuel, gasoline, solvents, or their vapor. Fe. ventilation bearings, pump bearings, chain bearings or other in chemical industry, bearings in lacquer, varnish or cleaning industry etc. for sealing in case of solvents. as flat seals, cocks, taps, O-rings, glass and metal.
Attila KD
Special grease resistant to oxidizing and chemical media. It does not have a melting point and is resistant to heat, since the base fluid is extremely stable as regards oxidation.
for sealing in case of chemicals as for flat seals, cocks, taps, O-rings, glass and metal. for lubrication of bearings in aerospace
Contact Greases / Electric Contact Grease / Contact Grease For Aluminium / Copper
Contactin CU
Contact (switch gear) grease on the base of copper, prevents sparks, decreases burning-surfaces at contacts, reduces friction at sliding contacts, stable against humidity
for electrical contacts in interrupters, relays, and mechanical controllers for increasing conduction of motors and generators.
Contactin AL
with added aluminum powder
same as Contactin CU
Contactin AG
with added electrochemical silver powder
same as Contactin CU
Contactin G
with a combination of very good conducting metals
same as Contactin CU
Contactin AY
Synthetic contact grease without any solids. Very low friction for easy going electrical contacts.. Also for precision engineering.
Flow Gear Greases with MoS2 are for heavy duty gears and offer emergency run properties. MoS2 prevents contact of the tooth surfaces, particular in the boundary lubrication range. MOLYDUVAL Flow Greases with MoS2 are a valuable supplement for higher pressure, extreme temperatures and for use in contact areas where a hydrodynamic film cannot be formed.
Prometheus L
Tacky standard grease for gears under normal loads. Water resistant.
for gears under standard load
-20°C up to +100°C
Prometheus MA
Tacky special grease for gears under highest loads. Water resistant. Added with heavy duty solids.
for gears under highest load
-20°C up to +100°C
Prometheus B 2800
Graphite containing open gear grease under high temperatures and pressures. Special pumpable and fluid consistency for mist lubrication
Heavily loaded open gears in drives of ore mills for drives of ball mills in mining industry.
(-) 30 to (+) 200 deg C.
Prometheus BG 290
Special tacky grease for slow running, mostly large, open gears under highest loads and very high temperatures. Water resistant. Mostly applied by mist lubrication, available in different consistency classes.
for gears under highest load and highest temperatures, as gears at mills
-30°C up to +250°C
Prometheus OZ
Open gear and cog-wheel lubricant for high loaded open gears and turnstiles. Prevents the gears from galling, welding and excessive wear, even under heavy load and at boundary lubrication conditions (dusty or rough weather).
· for construction machinery, cranes, dredges, building equipment, breakers, • for elevator and escalator gear terms, • for winches, shipping and lock channels
-25°C up to +80°C
Prometheus B 282
Very tacky graphite containing lubrication Grease for open Gears working under high pressure & temp.
Heavily loaded open Gears in ore mills, for drives of ball mills in mining industries. Gear tooth lubrication flex at bars, winds. Aluminum complex Thickener & addition of purest graphite.
The synthetic very tacky grease for long-life and maintenance-free lubrication in a wide temperatures. It's an extreme pressure grease suitable for instruments, bearings and small gear boxes., low oxidation range, no deposits, soft for ease of application, excellent resistance to moisture; prevents rust, tackiness insures noise and vibration damping, good EP qualities, prevents wear
for lubrication of small gear boxes and small open gears for speedometers, push-pull and rotating cables, cameras, slides, bearings and other applications where excellent oxidation stability and anti-wear properties are required
Greases with MoS2 are for heavy duty greasing points and long-term greasing with emergency run properties. MoS2 prevents contact of the sliding surfaces, particular in the boundary lubrication range. MOLYDUVAL greases with MoS2 are a valuable supplement for higher pressure, extreme temperatures and for use in contact areas where a hydrodynamic film cannot be formed.
Mona-Lisa
Multi-purpose heavy duty grease for high loaded greasing points and for long-term lubrication with emergency-run properties, absolutely water-resistant, good friction coefficient
for building equipment like dredges, cranes, rollers, mixers, cement industry,sugar mills, mills, machinery factory, for front propulsion and joints in motor vehicles
-25°C up to +130°C, shortly
Mona-Lisa 1000
Special type of MOLYDUVAL Mona-Lisa with high base fluid viscosity, very tacky, for slow motion bearings under highest pressure
same application as Mona-Lisa
-25°C up to +130°C, shortly
Pegasus C 46
High-temperature MoS2-grease with very good water resistance. Good long-term stability, provide excellent load carrying and rust protection over wide temperatures.
for rolling bearings and slide bearings at high temperatures, for all kind of bearings with influence of water or humidity
-20°C up to +160°C, shortly
Duventon
High temperature, non melting grease for heavy duty greasing points e.g. in hot air stream and in radiation heat. Resistant to hot and cold water, steam, acids and lye’s.
for all hot lubrication points,for bearings coming in contact with glues, steam, vapour, acids, and other problematic chemicals
-30°C up to +180°C, shortly
Aero 50
Permanent lubrication at extremely low temperatures or strong temperature fluctuations, especially at high pressures.
for airports and airport equipment,for lubrication of weapons radar etc.,for refrigerating machines and meteorological instruments, operating
Light Color grease for high speed rolling and sliding bearings. Offers at normal pressures, very good wear protection, water resistance good corrosion prevention
• for rolling and sliding bearings at high revolutions,• for slideways at high relative speed
-50°C up to +105°C
Supravit 75 LS
Synthetic grease for high speed rolling and sliding bearings. For high pressures:, very good wear protection, long-life lubrication, water resistance, good corrosion prevention, no deposits and no gelling.
· for rolling and sliding bearings at high revolutions and high pressures, also at very different working temperatures,• for slideways at high relative speed, • for bearings in electric motors
-54°C up to +150°C
Supravit 92 LP
Modern, high speed grease based on PAO, for all kind of bearings, very plastics compatible
· for bearings with high revolutions also at very high temperatures, • for slideways at high speeds
High-temperature grease on complex base in a very wide application range, very strong extreme-pressure properties, good adhesion, extremely water resistant.
• for the lubrication of high speed bearings under high temperature and under heavy load even for long-life and lifetime lubrication
-35°C up to +170°C / ,+200°C, NLGI 2, Light coloured, yellow
Pegasus C 6
Special high-temperature grease with excellent water resistance, high dropping point, heavy-duty capacity, no deposit formation in the highest temperatures.
for slide and roller bearings, even under heavy conditions, under high temperature and especially in humid air
-20°C up to +180/200°C, NLGI 2, light transparent, Complex thickener
Pegasus C 46
High-temperature MoS2-grease with very good walk stability, provide excellent load carrying and rust protection over a wide temperatures.
• for rolling bearings and slide bearings at very high temperatures,• for lubrication in thrust, cylinder bearings in sleeve bearings, • for gear lubrication
-20°C up to +180/200°C
Pegasus KLE 2
High temperature grease with low evaporation. For long-term lubrication without residue. Leaves no carbon residue. Resistant to age
for slow and fast running bearings at high temperatures, ventilator bearing, electric motor bearings, coupling pressure bearings.
-40°C up to +180°C /
Pegasus GBE 54
Light brown coloured high temperature grease with extremely low evaporation. For long-term lubrication at high load and at very high temperatures.
• for roller bearings, gears, chains, ovens chain grates etc. • for lubrication in thrust, cylinder bearings in sleeve bearings. • for gear lubrication
-40°C up to +230°C
Pegasus KD 460
Highest temperature grease based on fluorinated oils with PTFE. For long-term lubrication at highest temperatures (up to +300°C).
for roller bearings, gears, chains, ovens chain grates etc. • also for food industry (bearings in bakery ovens).
-15°C up to +290°C, shortly above 300°C
Pegasus KLM 2
Synthetic Base oil with MOS2 high temp. Grease with oxidation & corrosion protection additives.
· For Slow & Fast running Bearings at high temp. as ventilator bearings electronics engine, • For Extreme loaded fast running bearing. Automatic lubrication systems.
Long Life Greases / Water Resistant Greases /Excavator Grease / Construction Equipment Grease
Long-Life
Light-Color EP grease for long-term greasing under maximum load, good adhesion, absolutely water-resistant, even against boiling salt water and sea water, best corrosion protection, prevents rust, good sealing.
• for industrial equipment, motor vehicles, construction equipment and agricultural equipment, for heavy duty and in dusty and moist surroundings.• for bottle washing machinery, bottling machines, canning and sealing machines, in breweries
-30°C up to +120°C, short-ly
Long-Life PIT17
Similar to Long-Life but more tacky. Good adhesion, absolutely sea water-resistant, very good sealing.
• Same as Long-Life.• For Lubrication where a very tacky grease is recommended, .e. bearings in agriculture
-30°C up to +120°C, shortly
Long-Life T2
White heavy duty grease with low friction coefficient, better protection against tribocorrosion. Contains PTFE as a solid and friction modifier. Best corrosion protection, prevents rust, good sealing.
• for industrial equipment, motor vehicles, construction equipment and agricultural equipment, for heavy duty and in dusty and moist surroundings.
-30°C up to +120°C, shortly
Long-Life Z 2
White colored, heavy duty grease with an added synergistic combination of white solid lubricants.
Same as Long-Life T 2, but more white and a little bit cheaper
-30°C up to +120°C, shortly
Packaging Details:
Greases are available in 400gms cartridge, 500gms tins, 1 Kgs Containers, 5 Kgs and 18 Kgs Buckets, 180 Kgs Drums.
Special grease resistant to oxidizing Can be used in presence of oxygen and fuming nitric acid. Remains unaffected. Proofed by BAM as a lubricant for oxygen working until 80 bar at 60°C
for sealing in case of oxygen. as for flat seals, cocks, taps, O-rings, glass and metal.
These new multi-purpose greases are excellent for a wide variety of applications where plastic compatibility is required. Polypan PA combines the characteristics of protection, wear prevention and temperature stability of a synthetic grease with the seal and plastic compatibility of silicone greases.
for sliding and rolling bearings, anti-friction bearings of all kind for any lubrication of gears, pumps, instruments, meters, computing and accounting machinery, chains and other, where more plastics compatibility is required, than this of mineral oil based greases.
-40°C up to +150°C / +200°C Consistency 2 PAO Oil Based Aluminium complex thickener
Silicon Greases / High Vaccum Grease / Valve Lubrication
Siligra GO
Special silicone based greases (also named pastes), very good isolation behavior, wide temperatures, good resistance, good moisture resistance, corrosion proofed
for handling of insulators and controllers as release agent for maintenance and lubrication of rubber and plastic materials
-40°C up to +220°C Consistency ca NLGI 2-3 Silicone Oil Based
Siligra GI
as Molyduval Siligra GO, but lighter
same as Siligra GO
-40°C up to +220°C Consistency ca. NLGI 1-2D4 Silicone Oil Based
Siligra GU
as Molyduval Siligra GO, but stronger
same as Siligra GO
-40°C up to +220°C Consistency ca. NLGI 4 D5 Silicone Oil Based
Alpha Techno-Chem Manufacturing, exporting and supplying of lubricating systems that includes automatic lubricators, industrial automatic lubricators, precision engineered automatic lubricators and corrosion resistant automatic lubricators.
Processing...
