We are engaged in manufacturing export quality gas and water tubes which are made from low-carbon mild steel on automatic tube mill by high frequency induction welding process. Entire array is varied used for transmission of water, gas, oil and air. Other silent features of our water and gas tubes include following:

Sizes:	outside diameter from 15 mm NB (1/2") to 100 mm NB (4"), wall thickness 2mm to 5.4mm and length 4 to 7 meter
Pipe ends:	Plain, Screwed and socketed
Surface finish:	Black (self-colored) outside mill protective coating
Production standards:	IS - 1239 part 1, equivalent BS - 1387, BS - 6323, ASTM A53 Grade A
Packing:	Bare Bundles
Inspection:	Mill's certificate or inspection by an independent organization authorized  by the customer
Tests performed:	chemical test, mechanical test, and hydrostatic test, others as required by the standards
Thickness:	light : + not limited - 8%. Medium & heavy: + not limited - 10%.
Length:	Light - Medium - Heavy Tubes: Random length of 4 to 7 mtrs or as specified

With adeptness in the sphere, we offer qualitative array of structural tubes which are produced from carbon steel on automatic tube mill by high frequency induction welding process. These highly performing tubes find application in structural and civil engineering, construction, scaffolding systems, poles, trusses and automobile. Assistance of well equipped quality testing laboratory leads to testing of finished products by passing it through for chemical, physical and mechanical test as per Indian standard specification and other as required. Entire array is offered with following tabulated features:
 

Sizes:	Outside diameter wall thickness length from 15 mm NB (1/2") to 80 mm NB (3") 2.0mm to 4.8 mm. upto 12 mts.
Pipe ends:	Plain (Square-cut or bevelled)
Surface finish:	Black (self-colored) outside mill protective coating
Production standards:	IS-1161 - 1979 and Equivalent BS – 6323 and other standard upon request
Packing:	Bare bundles unless special packing is requested
Inspection:	Mill's certificate as per ISI specification or inspection by an independent organization authorized by the customer

 
Other dimensions of our structural tubes comprise of:
 

• Outside Diameter: 1) Upto & Including 48.3mm + 0.4mm - 0.8mm

                                         2) Over 48.3mm ± 1 %

• Thickness Weight: All sizes + not limited 1) Single tube +10% - 8%-10% 2) Less than 150 mtrs. + 10%- 8% 3) 150 mtrs & over ± 4%

Assistance of well-equipped manufacturing facility, we offer wide range of precision engineered square and rectangular sections. The products are produced as "cold-formed" from hot-rolled and semi-bright (pickled hot-rolled and cold-rolled) steel. Featured with durability, dimension accuracy, corrosion resistance, abrasion resistance and others, the range is variedly used in civil engineering, construction, machinery, agricultural equipment, conveyors, cranes, marine and containers.

Cited below are some of the features of the hollow sectioned products:

Sizes:	12 x 12mm to 100 x 100mm in squares. 15 x 25mm to 80 x 120mm in rectangular, From 0.8mm to 4mm Upto 8 mtrs (26ft)
Surface finish:	Black (self-colored and semi-bright), Outside mill protective coating
Production standards:	Conforming to IS-4923 & equivalent international specification ASTM A500, BS-6323
Packing:	Bare bundles unless special packing (jute, hessian cloth, etc.) is requested
Inspection:	Mill's certificate or inspection by an independent organization authorized by the customer
Tests performed:	As required by the standards

The above range can also be offered with various dimensions & thickness other than specified as per client requirement.

Tolerances of our products include following:
 

• Dimensions: ± 1%
• Thickness: ±8%
• Corner Radius: 3T - Max
• Squarness of Corners : 90° ± 2°
• Flatness : ± 1%

Our highly durable rigid steel conduit pipes are fabricated of high grade hot rolled and cold rolled steel and cutting edge technology. Garnered with features such as dimensional accuracy, durability, corrosion resistance, free from leakage and others, the range is used for internal & external electrical installation in factories, power generation stations and buildings. Entire array is presented with following dimensions and other features:

Sizes:	Outside diameter From 16 mm to 63 mm, wall thickness from 1.4 mm to 2.2 mm, length from 3 mtrs to 5 mtrs
Pipe ends:	Both sides threaded with one Coupling and on plastic cap
Surface finish:	1) Black stoved Enamel (inside as well out side), 2) Hot Dipped Galvanised (inside as well as outside)3) Pre Galvanised Conduits.
Production standards:	Confirming to IS -9537 Part 2, BS-4568 Part 1, Class 3 , Class 4
Packing:	Bundles are totally covered by Bitumen Hessian cloth
Inspection:	Mill's certificate or inspection by an independent agency
Tests performed:	Flattening test, bending test and compression test

 
Normally, the thickness of the rigid steel conduit pipe is maintained at 1.6 mm upto and including 32 mm and 2.0mm upto and including 63 mm. It can be made available in other thickness and diameter as per customers’ requirement. Tabulated below are sizes and dimensions of the products which are generally offered to our clients:
 

Nominal Size of Conduit	Outside Diameter	Tolerance On Diameter	Wall Thickness
mm	mm	mm	mm
16	16	0-0.3	1.4-1.8
20	20	0-0.3	1.4-1.8
25	25	0-0.4	1.4-1.8
32	32	0-0.4	1.4-1.8
40	40	0-0.4	1.8-2.2
50	50	0-0.5	1.8-2.2
63	63	0-0.6	1.8-2.2

Our oxygen lancing pipes with long service life are developed from hot rolled carbon steel. Prior to dispatch of the range to our clients, these are passed through various tests including dimensional checking, hydro testing (pressure test), flattening test and drift test. Global standard lancing pipes are widely accepted for blowing oxygen in electric arc furnace. Cited below are some of the features including dimensions of our pipes:

Sizes:	6 mm NB to 40 mm NB, outside diameter from 9.5 mm to 48.3 mm, wall thickness from 1.80 mm to 3.20 mm, length up to 7.00 mtrs
Pipe ends:	Plain, Threaded or Non Threaded with crimping coupling
Surface finish:	1) Black (self-colored), 2) Ceramic coated (inside as well as outside)
Production standards:	Confirming to IS -10577
Packing:	Black lancing Pipes in Bare bundles. Ceramic Coated Pipes in special hessian cloth
Inspection:	Mill's certificate or inspection by an independent agency

Ceramic coated lancing Pipes have number of additional characteristics such as increased resistance against heat & erosion, longer life resulting in speedy de-carborization & better metal oxygen interaction. Because of above mentioned factors, the product is cost effective resulting in power saving, lower consumption of electrodes and lower melting time.

With the presence of modern and advanced machineries manned by experienced team, we offer industry standard ERW precision tubes. Made of quality material, the tubes are appreciated for long service life, durability, corrosion resistance, abrasion resistance and others. The range is also offered to our esteemed clients as per their specific requirements.

Specific characteristics of the ERW precision tubes are following:

• Tolerances: Outside Diameter Pipes size upto & including 1/2 inches + 1 - 0.4mm + 1 -1 %, pipe size 2 inches or above
• Thickness: -12.5% (max)
• Weight: + 1 -10%
• Testing: +1 - 0.4mm

 
Being quality focused company; we offer the ERW precision tubes which are passed through following testing:

Bend Test For Pipes upto & including2 inches: Bending angles 90, bending radius 12 times to the OD of tubes (no crack in body & weld.)

Flattening Test for pipes over 2 inches :
     1. Flatten upto 2/3 of OD for ductility of weld
     2. Flatten upto 1/3 of OD for ductility of steel
     3. Full Flattening for testing of lamination

Sizes:	Outside diameter wall thickness length from 12.7 OD (1/2") to 127 OD (5")1.6mm to 4.8 mm. upto 12 mts.
Pipe ends:	Plain
Surface finish:	Black (self-colored) outside oil coating
Production standards:	Conforming IS-3074, IS-3601,IS-9295 & BS-6363
Packing:	Bare bundles unless special packing is requested
Inspection:	Mill's certificate as per ISI specification or inspection by an independent organization authorized by the customer

Cuplock system is a combination of top cup, bottom cup and ledger blade. Quick fastening of horizontals. Four horizontals can be fastened at one time with firm clamping action of top cup making the joint rigid. A unique node point connection allows up to four horizontal members to be connected to a vertical member in one single action without the use of nuts and bolts or wedges. Cuplock system can be used for all forms of access and support structures in the building and construction industries, shipbuilding, offshore construction and industrial maintenance.

CUPLOCK ON HIRE BASIS

We provide scaffolding materials on rental basis to Big construction houses and glass fixing works, etc as per the requirements. With our wide setup for manufacturing as well as rental stock, we deliver any of the scaffolding materials in minimum time. We can also manufacture scaffolding items as per clients specific designs for customized use. Available in various finishes like painted, galvanized, etc scaffolding items can also be supplied in any specific coatings required by customers.

We specialize in manufacturing ISO qualified base jacks using high grade material. In addition, with adeptness of our diligent workforce, we also offer the range with customized solution as per client specifications and requirements. Following stringent quality management system, the finished product is passed through various quality tests prior to its final dispatch. We offer various products under the category with various specifications. These are as follows:

Product Name: Adjustable Base Jacks (Solid)

• Specifications: Dia Sizes: 34/36/38 mm
• Thread: 4 TPI Acme (Rolled Thread)
• Safety Lock: 150mm
• Base Plate: 150*150*6 mm
• Nut:  Malleable Cast Nuts

Product Name: Adjustable Base Jacks (Pipe)

• Specifications: Dia Sizes: 34/36/38 mm
• Thickness: 4mm
• Thread: 4 TPI Acme (Rolled Thread)
• Safety Lock: 150mm
• Base Plate: 150*150*6 mm
• Nut:  Malleable Cast Nuts

Product Name: Universal Jacks

• Specifications: Dia Sizes: 34/36/38 mm
• Thread: 4 TPI Acme (Rolled Thread)
• Fully Threaded

Product Name: Adjustable U-Head Jack

Specifications: U-Head is to hold timber beams securely in place. Adjustable U-Head offers 500mm of rolled threaded tube that can be adjusted by a double handle collar nut.

We are one of the leading manufacturers and exporters of wide range of quality scaffolding fittings. 

We also offer world-class steel coupler. It is mostly used to connect lines of hydraulic or pneumatic systems without any fluid loss. Available in various dimensions our designed couplers can be categorized as:

• Fixed/Right Angle Coupler (Drop Forged) – It is a one piece forged coupler applicable for connecting two scaffold tubes at right angles to each other. Rigid and rugged in nature it give maximum safety in load bearing applications and is available in galvanized or paint finish.
• Swivel Couplers (Drop Forged) – It is used for connecting two scaffold tubes at any angle to each other. Designed for maximum safety, it is available in galvanized or paint finish and is also used for cross braces connection of scaffold tubes.
• Fixed/Right Angle Coupler (Pressed Sheet Metal) – It is a sheet metal pressed coupler used to connect scaffold tubes at right angle to each other. Designed to withstand distortion as well as slipping, it combine pressed components, EN-8 eye bolts and rivets for maximum strength.
• Swivel Couplers (Pressed Sheet Metal) – It is used for connecting two scaffold tubes at any angle to each other. Available in galvanized or paint finish, it is mainly used for ledger bracing.

Other salient features of the scaffolding accessories are as follows:

• End finish square cut or beveled
• Delivery condition black (self colored)
• Outside protective coating

PUSH PULL PROPS

The push-pull prop has a double collar, which enables the walls and columns to be accurately plumbed. Used in conjunction with column boxes for speedy erection and ease of alignment.

Description	Size (mm)	Mass (kg)
No 1 No 2 No 3 No 4 Prop Swivel Foot	1 676 - 3 124 1 981 - 3 352 2 590 - 3 962 3 200 - 4 876	19.6 20.5 22.7 26.9  1.5

PROPS

Having experience of more than 2 decades, we have gained expertise in manufacturing precision engineered props in adherence to industry standard. These products provide the ideal and the most economic method of support for all kinds of slabs, beams, formwork, wall & columns. These also find application for a wide variety of applications in general building construction and repair work. Tabulated below are sizes of props offered by our company:

• 3.20 - 4.87
• 2.59 - 3.95
• 1.98 - 3.35
• 1.75 - 3.12
• 1.04 - 1.82
• 2.50 - 4.50
• 2.00 - 3.60
• 1.60 - 2.90
• 1.00 - 1.80
• 0.70 - 1.30
• 0.50 - 0.80
• 0.25 - 0.50

 Painted Prop (Heavy Duty)
 

Size	Weight (Kg)
1	16.80
2	18.50
3	19.70
4	21.20

Outer Pipe - 3.40mm
Inner Pipe - 3.00mm

 Painted Prop (Light Weight)
 

Size	Weight (Kg)
0	9.25
1	14.20
2	14.75
3	16.80
4	20.20

Outer Sleeve - 3.40mm
Outer Stem - 2.40mm
Inner Pipe - 3.00mm

Galvanised Prop 
 

Size	Weight (Kg)
0	11.20
1	17.20
2	18.90
3	20.10
4	21.80

Outer Pipe - 3.40mm
Inner Pipe - 3.00mm

PROPS with tube diameter X Thickness as per customer requirement can also be supplied.

Accessories

• Prop Sleeve
• Prop Nut
• Locking Pins

Trench strut are a popular method of support in the construction industry. Struts eliminate the need to use Timber as supports and gives a much more flexible application when a temporary support is required.

• The struts are made of steel tubing, consisting of an inner & outer sleeve.
• The Outer sleeve as a Base plate attached and the inner sleeve has a head plate. The trench strut head and Base Plate are shaped to attach to timber cross struts.
• Adjustment is made by a screw thread, collar and pin which forms part of the outer sleeve.
  

Entire assortment of precision engineered H-frames are manufactured under the surveillance of quality team which ensures of the products as per the global standard. Made of quality material using cutting edge technology, the range is widely appreciated for durability, high performance, long service life, corrosion resistance, abrasion resistance and others. With gaining expertise in the industry since our inception, we facilitate our clients for customized solution as per client requirements.