Pan Mixers & Concrete Mixers

PAN MIXER (With Double Reduction Gear Box) is used to prepare Fal-G, fly ash based binder by thoroughly grinding 80% Fly ash with 16% Hydrated Lime and 4% calcined Gypsum. The resultant compound possesses 50% the strength of commonly used OPC cement. The produced compound costs 25% of the normal cement and hence imparts 25% saving in the cost of blocks. Blocks produced with Fal-G binder gains more strength by aging while the cement blocks the strength is lost in course of time. Kiran Engineers offers Pan Mixers with heavy rollers of 200 Kgs each for thorough and efficient grinding of the Fal-G compound. The machine has a brimful capacity of 250 Kgs and can produce in excess of 200Kg per batch. A batch of Fal-G compounding generally completed in 5 minutes. For the tough job of grinding the compound and mixing aggregates, it requires a sturdy drive and this pan mixer is provided with a ‘Double Reduction Gear Box’ with hardened and ground steel gears of automobile origin. These gears will give very long life with trouble-free performance. The machine generally supplied along with a 7.5 HP/1440 rpm Electrical Motor and starter, and can be installed almost immediately without any need for foundation. The machine has a welded tank with thick mild steel plate and has a replaceable wear plate. Heavily supported cultivator plates mixes the compound and aggregates thoroughly.

A Simple and most commonly used concrete mixer with a capacity of 5 cft. The tank is made out of heavy steel plate and the body is of welded steel construction. Mounted on trolley with fabricated Mild steel wheels or inflated rubber tyres.

The machine can be powered with a 5 HP diesel engine or a 3 HP motor.

A commonly used concrete mixer with a capacity of 7 cft, with a tipping Hopper. Aggregate materials are loaded into the hopper while the mixer is under operation. When the mixer is emptied, the material in the hopper will be tipped into the mixer tank, thus saving a lot of time while improving production output.

The tank is made out of heavy steel plate and the body is of welded steel construction. Mounted on trolley with fabricated Mild steel wheels or inflated rubber tyres.

The machine can be powered with a 7.5 HP diesel engine or a 5 HP motor.

Tipping Barrows are used for transporting prepared concrete mix from Pan Mixer to the Egg Layer Brick machine. The barrow is equipped with a ‘tipping’ arrangement to tip the mix into the raw material trough of the brick machine. Every installation of Egg layer brick machine requires 2-3 nos for effective transportation with minimum labour involvement.

A 250 Kg capacity Pan Mixer fitted with a hydraulic operated Tipping Hopper, which gives 30% more productivity. The tipping hopper can be loaded with material while the mixing is under progress, thus saving labour while increasing the number of batches. The tipping hopper also facilitates dumping the material with a tipping barrow. The machine comparably saves 2 labourers in block making and enhances the production by 30%.

This machine is also embedded with the features of the Common pan mixer viz: double reduction gear box to handle heavy loads, heavy rollers of 200 Kgs each fitted with bearings for efficient grinding, and the centre column fitted with bearings for extended life.