We provide our clients with a quality assured gamut of laboratory chemicals that are suitable for applications in analytic chemistry and laboratory test procedures. These chemicals are formulated to precision and can be availed by our clients in various quantities at market leading prices.

We have been manufacturing a natural range of bio-chemicals that is produced from organic sources like agricultural food and feed crop residues, aquatic plants, animal wastes and other waste materials. Also known as bio-based chemicals, green chemicals and plant-based chemicals, these bio-chemicals are extracted from corn and corn components. Offered in the names of ethyl lactate, succinic acid, and polylactic acid, these bio-chemicals are used for the production of plastics, solvents, clothing fibers, paints, and food additives.

The types of bio-chemicals offered by us include the following:

• Commodity chemicals -- These include solvents, fuel additives, lubricants, surfactants, adhesives, and inks.
• Fine chemicals -- These include enzymes, nutraceuticals, and pharmaceuticals.
• Chemical intermediates -- These include sugars, organic acids, and other monomers.

We are instrumental in manufacturing a precisely formulated range of HPLC chemicals that are clear in appearance and are not more than 10 hazens unit in color. These chemicals are safe for usage and are offered to our clients in the following types:

• Solubility: Miscible with water, acetone and ether
• Minimum assay: GC 99.7%, wt per unit at 20 degree 0.780-0.780g
• Maximum absorbance: 1cm cell
• UV cut off
• 190 mm - 1.0
• 200 mm - 0.1
• 230 mm - 0.01
• Filtration by 0.2 meu meter membrane having maximum limits of impurities:
• Non volatile matter 0.0005
• Acidity 0.002%
• Water 0.05%

Available with us, is a pure and appropriately composed array of agrichemicals or agrochemical that find application in the agriculture sector. Provided to those clients who have Government-issued permits for purchase, these agro-chemicals mainly include the following:

• Insecticides
• Herbicides
• Fungicides
• Synthetic fertilizers
• Hormones
• Chemical growth agents
• Concentrated stores of raw animal manure

These toxic agrichemicals pose environmental and/or health risks, particularly in the event of accidental spills and is thus advised to subject them to mandatory standards and regulations like the following:

• Proper storage facilities and labeling
• Emergency clean-up equipment and procedures
• Safety equipment
• Procedures for handling
• Procedures for application and disposal

We provide our clients with an accurately formulated range of fine chemicals that adheres to the norms of good manufacturing practice and food and drug authorities. These pure, single chemical substances are commercially produced with chemical reactions and hold the following distinguishing features:

• Custom produced in smaller quantities for special uses
• Flexible chemistries utilized for production
• Higher research investment per kilogram
• Produced in industrial quantities

The fine chemicals are categorized into the following categories and are provided to our clients at most competent prices:

• Active pharmaceutical ingredients and their intermediates
• Biocides
• Pesticides
• Herbicides
• Specialized chemicals
• Specialty chemicals
• Inks
• Performance-enhancing additives
• Special coatings
• Photographic chemicals

We are instrumental in offering our clients with an appropriately formulated range of imported chemicals that find application in varied industries. These chemicals are accurate in composition and pH value that makes them highly acclaimed in the industry and among our wide base of clients.

We deal in a wide variety of chemical reagents that is consumed during a chemical reaction in order to bring about a reaction or to see whether a reaction occurs. Also utilized for effecting a transformation on an organic substrate, these reagents are widely applicable for chemical analysis or physical testing. Having low level of impurities like sodium and chloride ions and high electrical resistivity, these reagents are offered to our clients in the following types:

• Analytical reagents
• Fehling's reagent and Tollens' reagent
• Organic reagents
• Collins reagent
• Fenton's reagent
• Grignard reagent

We have in store for our clients, an industrially verified range of pH indicators that are used for determining the pH (acidity or alkalinity) of a solution or ascertaining the extent of chemical reactions in titrations in analytic chemistry and biology experiments. A pH indicator is a halochromic chemical compound that works as a chemical detector for hydronium ions (H3O+) (or Hydrogen ions (H+) in the Arrhenius model) in quantifiable measures of program performance and impact. These indicators are subjective to change of color of the solution depending on the pH value and exhibit results in the following form:

• Alkali: pH value above 7.0
• Acidic: pH value below 7.0
• Neutral: pH value of 7.0

Metals in general have superior electric and thermal conductivity, high luster and density, and the ability to be deformed under stress without cleaving. While there are several metals that have low density, hardness, and melting points, these (the alkali and alkaline earth metals) are extremely reactive, and are rarely encountered in their elemental, metallic form.

Density
The majority of metals have higher densities than the majority of nonmetals. Nonetheless, there is wide variation in the densities of metals; lithium is the least dense solid element and osmium is the densest. The metals of groups I A and II A are referred to as the light metals because they are exceptions to this generalization. The high density of most metals is due to the tightly-packed crystal lattice of the metallic structure. The strength of metallic bonds for different metals reaches a maximum around the center of the transition series, as those elements have large amounts of delocalized electrons in a metallic bond. However, other factors (such as atomic radius, nuclear charge, number of bonding orbitals, overlap of orbital energies, and crystal form) are involved as well.

Malleability
The nondirectional nature of metallic bonding is thought to be the primary reason for the malleability of metal. Planes of atoms in a metal are able to slide across one another under stress, accounting for the ability of a crystal to deform without shattering. Hot metal work from a blacksmith.

When the planes of an ionic bond are slid past one another, the resultant change in location shifts ions of the same charge into close proximity, resulting in the cleavage of the crystal. Covalently bonded crystals can only be deformed by breaking the bonds between atoms, thereby resulting in fragmentation of the crystal.[unreliable source?]

Conductivity
The electrical and thermal conductivity of metals originate from the fact that in the metallic bond, the outer electrons of the metal atoms form a gas of nearly free electrons, moving as an electron gas in a background of positive charge formed by the ion cores. Good mathematical predictions for electrical conductivity, as well as the electrons' contribution to the heat capacity and heat conductivity of metals can be calculated from the free electron model, which does not take the detailed structure of the ion lattice into account.

Electric charge
When considering the exact band structure and binding energy of a metal, it is necessary to take into account the positive potential caused by the specific arrangement of the ion cores - which is periodic in crystals. The most important consequence of the periodic potential is the formation of a small band gap at the boundary of the brillouin zone. Mathematically, the potential of the ion cores is treated in the nearly-free electron model.

Amino acids or alpha-amino acids (H2NCHRCOOH) are molecules that contain amine and carboxyl functional groups and vary in size from a hydrogen atom in glycine through a methyl group in alanine to a large heterocyclic group in tryptophan. Besides the natural amino acids, there is a wide range of non-natural amino acids that can be availed from us. Extensively used in technology and chemical industries, these amino acids are formulated with precision for ensuring safety in application.

Available with us, is an industrially verified gamut of chlorometric reagents that is offered to our clients in precise composition. Prepared in accordance to the industrial standards of quality, these reagents are non toxic and impart suitable reactions. These reagents are widely applicable in the chemical industry and can be obtained by our clients, in most competitive prices.

Antioxidants are molecules that are helpful in slowing or preventing the oxidation of other molecules, which results in removing free radical intermediates and terminating chain reactions. Performing the functions of reducing agents, these antioxidants are available in various forms like thiols, polyphenols, glutathione, vitamin C, vitamin E as well as enzymes such as catalase, superoxide dismutase and various peroxidases. We provide our clients with these antioxidants that are widely applicable in the following areas:

• In pharmacology for the treatments of stroke and neurodegenerative diseases
• As ingredients in dietary supplements for maintaining health
• For preventing diseases such as cancer and coronary heart disease
• As preservatives in food and cosmetics
• For preventing the degradation of rubber and gasoline in industrial use