We offer clients air curtains, which prevent entering of air in a conditioned environment such as air conditioned or heated room. These generate an evenly distributed laminar air flow on the entryway and prevents wind borne contaminants such as dust, fumes and pollutants. Furthermore, our range also provides an ideal and cost effective solution even when the door or entrance is left open for a long time.

Some of the technical specifications of our range:

• Type: Commercial Air Curtains with nut bolt sections.
• MOC : 18 CRCA power coated on both side.
• Available color : Cream/white/black.
• Blower make : Blow tech make.
• Blower type : Extruded aluminum dynamically balanced impeller.
• Air velocity : 2800 to 3000 FPM.
• Suction : Slotted sheet.
• Motor : 1 or 2 nos 1/3 HP, single phase.
• Sizes : 750mm/900mm/1200mm/1500mm/1800mm/2000mm long.

Optional/Accessories

• Stainless Steel and aluminum Construction.
• With 20 u and 5 u filter in suction.
• With micro switch to control air curtain with door opening.
• With motor speed controller.

We manufacture air showers, which are self contained air chambers, installed at the entrance to clean rooms. These helps to minimize the amount of particulate contaminants.

The construction features of our range are:

• Body with 18 gauge oven baked CRCA powder coated finish, also available in optional stainless steel.
• Nozzles are oven baked aluminum power coated for additional protection against corrosion and rust.
• Heavy duty aluminum framed glass doors.
• Electromagnetic locks and emergency push buttons for locking the doors instantly.
• Self designed digital display microprocessor control panel for smooth, trouble free working.
• HEPA filters of 99.97 % efficiency down to 0.3 micron.
• Replaceable pre-filter with 50% dust arresting capacity to maximize the life of absolute filters.
• PVC or SS(optional) flooring to facilitate cleaning.
• Indication lights to regulate the traffic flow in and out of the air shower.
• Static and dynamic blower for reduced noise.

Our dispensing and sampling booth are used for weighting and dispensing of critical pharmaceutical and other powders. These provide down flow of HEPA filtered clean air, thus creating clean environment in the area where powder is being dispensed. It also protects the worker, who is working inside from accidentally inhaling the powder fumes as the air bound powder gets trapped in the suction filter at the bottom.

The technical specifications of our product are:

• Type - Recirculated type or exhaust type.
• MOC - SS double skin wall and filter in aluminum frame, structure SS and wall acrylic, structure MS powder coated, wall acrylic and filter in aluminum frame or complete aluminum structure.
• Filter - Mini pleat HEPA filter in supply and fine filter in return air.
• Pressure drop - Magnehelic gauge provided.
• Controller - Motor On /off indication, speed controller for motor provided.
• Light - Light and addition 15 A point is provide in booth.
• Air cleanness - Class- ISO-5(As per ISO-14644-1).
• Air flow rate - 0.45 + 0.1 m/s.
• Grille - SS perforated grille.

We offer horizontal and vertical laminar flow units, which are used for pharmaceuticals filling, sealing, capping, bottle filling, electronic, semi conductor and hospitals and research laboratories.

Our range have the following technical specifications:

• Type - horizontal and vertical units with table and ceiling mounted.
• MOC - SS structure and side wall with acrylic sheet or MS power coated and inside surface SS and acrylic.
• Filter - Mini pleat HEPA filter in supply air and pre filter in return air.
• Pressure drop - Magnehelic gauge provided.
• Controller - Motor On /off indication, speed controller for motor provided.
• Light - Light and addition 15 A point is provide in booth.
• Air cleanness - Class- ISO-5(As per ISO-14644-1).
• Air flow rate - 0.45 + 0.1 m/s
• Grille - SS perforated grille

Our range of air handling units are available in double skin and single skin. These are widely used in pharmaceutic units, clean room,shopping mall, hospital, commercial center, call center, industrial ventilation, air cooling and other allied places.

Some of the general specifications of our range are:

• Available type- Horizontal /vertical /ceiling suspended.
• Double/single skin/double decker.
• Capacity of 400 CFM to 50000 CFM.
• Static pressure range from 25 mm to 150 mm of Wg.
• MOC-Inner skin of.6 mm thick pre coated.
• Outer skin.of 6 MM thick GI plain.
• Panel thickness of 25 mm and 50 mm.
• Infill between panel-sandwich construction with CFC free PUF insulation.
• Frame work-Extruded aluminum profile with nylon fitting.
• Base frame -GSS Frame.
• Coil- 4 / 6 / 8 / 2 row copper tube with aluminum fins.
• Drain-Aluminum/SS/GI
• Motor-ABB/semens make 3 phase motor.
• Fan-Forward and backward fan imported fan.
• Filters-50 MM thick pre filter and 300mm fine and HEPA filter.

Our range of pre, fine and HEPA filter are widely used in pharmaceutical, clean room, semi-conductor, biotechnology, photo film, optical, precision mechanical, critical O.T, defense, air handling units and air conditioning etc. The pre and fine filters are made in aluminum/GI /MS powder coated and the HEPA filters are made of imported sub micromic glass fiber. Our products are designed to clean sub-micronic airborne particles, bacteria and radia active debris. Furthermore, these are resistant to chemicals, acids and organic solvents.

Following are the construction features of our range:

• Filter media micro fiber glass.
• Media support aluminum foil.
• Frame material aluminum/GI/SS/MS.
• Frame type box/flange/channel.
• Sealant epoxy sealed.
• Direction of flow flange to cassette.
• Size as per customer requirement.
• Efficiency 99.997 % down to .3µ.
• Thickness available 150 mm /300 mm.

We offer fan coil unit, which are used for floor standing or ceiling suspended. These are made of copper tubing and aluminum fins with vent valve for air removing.

Some of the features of our products are:

• Enhanced construction for long life.
• Rust resistant body.
• High efficiency and low noise centrifugal.
• Space saving due to slim construction.
• Low energy consumption.
• No leakage of water.

Our air washers are available in modular designs and made out of pre-fabricated tank and panels. These are widely used in textile mills, paper, tea garden and green house / poultry sheds.