KM Cables

K-Flex flat travelling cables up to 24 core in different sizes viz 1mm², 1.5 mm² are the best suited travelling cables for lifts, cable trolleys hoists, cranes escalators etc. The cables are manufactured using a special type of compound which is blend of PVC and Synthetic Rubber. This special compound enables the cable to meet all kind of requirement as per UN Standards and ensures trouble free operations under most rugged conditions. The flat cables are weather proof cables with additional properties of U.V. protection. the cables are smoothly working from -30^o C to +50^o C atmospheric temperature.

K-Flex has developed a special grade XLPE insulated cables(upto 1100 Volts) applications. This is a thermoset type of polymer enriched with crosslinking agent. This is extruded over the conductor using modern extruders and is thoroughly crosslinked under controlled conditions. This XLPE insulation overcomes the drawbacks of PVC hitherto extensively used as an insulating material, without losing any of PVC's desirable properties.

This category 5e, for pair is a high-speed high performance, 100 ohm impedance cable capable of carrying high bit-rate signalling for extended distances in horizontal cabling. Signal amplifiers are not required for a lenght of 328 feet (100 m). Applications can include voice, isdn, atm 155 mbps, atm 622 mbps, 100 mbps tpddi, fast and giga ethernet, 100 base-t mbps tp-pmd, 100 base - t.

PTFE Wires, cables are tape wrapped wires having uniform insulation thickness around the central conductor compared to the wires insulated by extrusion process. PTFE is higher grade insulating polymer compared to other fluorocarbons that are used in extrusion process. PTFE Wires, cables have much greater perfection.

Product Range

• Hook-up Wires
• RR Co-Axial Cables
• Tri-Axial Cables
• Multi Core Twisted Cables
• Twisted & Shielded Cables
• Twisted Shielded & PTFE /PVC Jacketed Cables
• Double Shielded Cables
• Multi Pair Cables
• Twin Parallel Balloon Wire
• Sleeves
• PTFE Tape
• PTFE Hoses

K-flex battery cables are used in original equipment by india's leading vehicle manufacturers. Cables are manufactured from electrolytic grade, bright annealed, bunched, bare copper conductors. These cables are also used in other applications where batteries are used e. G. Telecommunication, power, computers, etc. Where the d. C. Voltage does not exceeds 100 volts. These cables are long-lasting and ensure proper distribution of power in the vehicle.

To add to the existing range of Electrical wires, K-Flex introduces - Flame Retardant PVC insulated electrical Wires, which offers added safety.

Each wire is manufactured using 99.97% pure, electrolytic grade, bright anealed bare copper with more than 100% conductivity better purity & conductivity of copper ensures greater saving of electrical energy and thus helps to reduce electricity bills. The conductor is made of multiple strands of finely drawn copper wires thereby offering greater flexibility which makes these wires ideal for conduit wiring.

RF Co-Axial-Cables are used for transmitting signal from antenas of tower to B.T.S. also as jumper cables from one instrument to another.

Silicon rubber insulated cables are used in electric utilities such as the generation and transmission of electricity. Long service life under normal environment in Nuclear and conventionally powered generating stations plus safety considerations are the significant factors of these electric appliances. When exposed to fire, Silicon offers circuit integrity, low smoke evolution, and freedom from halogen acids. (For e.g. Boilers, Electric Furnaces, Cokd Ovens, Driers, Bakeries, Blast Furnaces & High Furnace Generator)

These are the cables especially used to trasmit the under water movements from under water capsule sensors to the concern device on the sea shore. This cable carries one / two ducts in built in cable itself which are maintaining the pressure inside the underwater capsule at normal pressure, Normally Nitrogen Gas is used to maintain the pressure inside the capsule. This cable also have self support membrane to hold the weight of capsule without any additional support .

For trouble-free working, these connecting cables are just as important as winding wires are for the submersible pump motors. K-Flex 3 Core Flat Cables are manufactured keeping in mind the severe and difficult conditions in which they are required to perform. The individual conductors are made from bright electrolytic grade copper. The wires are drawn, aneealed and bunched properly to ensure flexibility and uniform resistance. Each of the three copper conductors is insulated with a special PVC Compound. The cores are laid up in flat parallel position. The outer sheath of the cable is made from a special grade of abrasion resistant PVC compound impervious to water, grease, oil etc. The cables are now available with sequential marking, company's name, size and voltage printed on them

K-Flex Cables have the central conductor of solid stranded bare electrolytic grade 99.97% pure copper. The secondary conductor is specially designed with polyaluminium tape, applied longitudinally which overlaps and is bonded on the foam dielectric. Aluminium alloy wires with high tensile strength are braided and applied for the aluminium tape with specified coverage. The cable is then jacketed with a special long lasting UV resistant PVC compound.

K-Flex Flame Retardant Low Smoke (FRLS) electrical wires are manufactured by using electrolytic grade copper to insure superior conductivity. The Cable has special flame retardant, low smoke emitting and toxic fumes suppressing properties, in addition to the properties required by IS 694 : 1990.

During a fire, ordinary PVC insulated wires give out thick black smoke and toxic fumes of hydrochloric acid gas. This impairs visibility and hampers rescue operations. On the contrary, K-Flex FRLS Cables not only emits very little smoke and toxic gases, but also retards the spread of the fire. It is thus ideal for concealed and conduit wiring in multi-storied high rise buildings such as hotels, banks, hospitals, factories, commercial and residential complexes etc.

Description: Solid round copper conductor, polythene insulated jelly filled poly-Al moisture barrier bonded polythene sheathed underground telecom cable usable for 2 Mb/s digital System.

Application: This cable is intended as a transmission medium for carrying 2 Mb/s digital signal.

K-Flex Winding Wires are insulated with a very superior grade of HR PVC compound to give it the necessary strength and resistance to abrasion.

The copper conductor of required purity and conductivity is drawn and annealed to stringent specifications. The automatic on-line controls in our extrusion process consistently give high quality K-Flex winding wires.

K-Flex has developed a special range of winding wires with stranded copper conductor insulated with HR PVC compound for higher HP submersible pump motors. These are also manufactured to individual customer specifications.

generation and transmission of electricity. Long service life under normal environment in Nuclear and conventionally powered generating stations plus safety considerations are the significant factors of these electric appliances. When exposed to fire, Silicon offers circuit integrity, low smoke evolution, and freedom from halogen acids. (For e.g. Boilers, Electric Furnaces, Cokd Ovens, Driers, Bakeries, Blast Furnaces & High Furnace Generator)

In case of multicore cables, the insulated cores are laid up to form the core asembly. The inner cores are coded for ease of identification as per National / International coding practices. The Sheathing is provided with a specially formulated PVC compound to facilitate not only ease in stripping but also to withstand mechanical abrasion while in use.

K-Flex PVC insulated single core and multicore sheathed cables are manufactured as Per IS 694 : 1990, in sizes from 0.5 sq. mm to 50 sq. mm in single core, and in sizes 0.5 sq. mm to 4.0 sq. mm upto 5 cores. These sizes carry the prestigious ISI mark. The rest of the sizes generally conform to IS 694 : 1990. Cables are also available for the export market. Special purpose cables can also be made available. Single and Multicore Screened Armoured / Unarmoured, PTFE insulated, Fiber glass insulated, Rubber insulated, compensating cables and all kind of tailor made cables are made as per customer's requirements.

K-Flex twisted paired cables are best suited for telephone and switchboard cabling applications. The conductor is make of solid annealed, high conductivity bare copper. The conductor is insulated with special grade high-density polyethylene different colours. The insulated cores are twisted with uniform lay to form pairs and are bunched together in such a manner so as to minimise cross talk. In 50 and 100 Pair cables the units of 10 and 20 pairs respectively are identified with colour binders and stranded to form the laid up cable. The laid up cable is taped with polyester tape and further jacketed with a grey / black colour PVC with high oxygen and temperature index. The cables can be used for switchboard and internal telephone wiring in high-rise buildings, offices, factories, hotels, residential complexes etc. They generally conform to ITD specifications G/WIR-06/02 May 94.

Stringent quality control in every stage from raw material to manufacturing upto finished product, guarantees high quality,.