We offer a wide range of rotary bottle washing machine, which is very durable and offers superior performance.
Salient Features:-

• Geneva mechanism.
• Four inner, one outer and one air wash.
• Sequence of washes to customer's choice.
• Out put:64 to 100 Bottles per minute.
• Easy operation.
• Stationary nozzles eliminate contamination of water cycles.
• Easy loading and unloading with two rows.
• Higher capacity centrifugal pumps to wash bigger bottles 500 ml & 1000 ml.
• The stationary nozzles avoid chipping of bottle necks.
• Pumps and tasks are mounted on portable stand for easy maintenance.
• Bottle guide system specially for light weight bottle.

Technical Specifications:

Wash Cycle First Wash	300 Ltrs/Hour Approx at 15 PSI.(Detergent Water).
Second Wash	Minimum Consumption as such, water loss during recirculation shall be compensated.(Steam/Hot Water).
Third Wash	600 Ltrs/Hour Approx at 15 PSI.( D.M. or DL. Water)
Fourth Wash	15 PSI (Air).
Out Side Wash	800 Ltrs/Hour Approx at 15 PSI (Ordinary Water).
Ele. Heater	3 KW. (For Hot Water)
Container Size	Ø 25 mm to Ø 100 mm
Maximum Height	280 mm
Container’s Neck Size	Ø 20 mm to Ø 38 mm
Maximum Height	280 mm
Overall Dimension	1550 mm(L) X 1700 mm(W) X 1300(H) Approx

We offer Automatic Volumetric Liquid Bottle Filling Machine, which is offered with the following salient features as mentioned below.
Salient Features:-

• + - 1% Filling Accuracy on single dose.
• Rigid vibration free construction for trouble free performance.
• S.S elegantly matt finished body.
• Elegant and easy control panel for total control on operation.
• Minimum charge overtime, from one size to another container or fill size.
• Automatic washing of conveyor belt optional.
• No container No filling system - to avoid spillage.
• Pneumatic control bottle stopper.
• CGMP Model.

Technical Specifications

Model No	KALF-100/150/200
Output/ hrs Upto	6000 Up To 9000 Up to 12000
Motor	1HP/440 Volts/50 Hz 1.5 HP/440V/50 Hz. 1.5 HP/440 Volts/50 Hz.
Cap Diameter	13 mm, 20 mm, 32mm..
Container Size	14 mm to 50 mm Diameter. 25 mm to 100 mm (H)
Height Of Conveyor	750 mm to 840 mm.

Automatic Dry Syrup Micro Doze Type Powder Filling Machine is a user friendly machines, which requires low maintenance. We offer it under following technical specifications. OUTPUT:

• Up to 100 bottles/ min. for single close.
• Up to 50 bottles / min. for double close.
• Up to 30 bottles / min. for triple close.

Fill Capacity:

• 5 gms to 30 gms/ single doze with different powder wheel fill depending on neck diameter and powder characteristics.

Accuracy:
 +- 2% For depending upon the consistency, uniformity & bulk density of powder under the controlled level of humidity below 30%. DIMENSION:

• 1550 MM [L] X 675 MM[W] X 1700 MM[H].Approx.
• Container diameter: 25 MM TO 70 MM.
• Height: 55 MM TO 120 MM.
• Powder hopper 5 kgs - SS 316 all contact parts of SS 316 L.

We provide specially designed Automatic Multi Head Ropp Cap Sealing Machine is provided to increase storage capacity of bowl which has low noise level power consumption, no container , no cap arrangement. CGMP MODEL
Salient Features:-

• Single motor synchronizes conveyor, star wheel & platform turret.
• Adjustable height of conveyor belt.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level power consumption.
• No container No cap arrangement.
• CGMP MODEL

Specifications

Model No.	KARCS-100	KARCS-150	KARCS-200
Output/ hrs	Upto 6000 bottles	Up To 9000 bottles	Up to 12000 bottles
Motor	1HP/440 Volts/50 Hz	1.5 HP/440V/50 Hz.	1.5 HP/440 Volts/50 Hz.
ROPP Cap Diameter	22 mm to 56 mm with the help of change parts.
Container Size:	A] 22 mm to 100 mm Diameter] 38 mm to 210 mm (H) Option for bottle height available.
Height Of Conveyor.	750 mm to 840 mm.

Available in user friendly features, we offer Automatic Aluminum Cap Sealing Machine, which is priced at industry leading rates.
Salient Features:-

• Single motor synchronizes conveyor, star wheel & platform turret.
• Adjustable height of conveyor belt.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level power consumption.
• No container
• No cap arrangement.
• Gmp Model

Model No	KAACS-100 KAACS-150 KAACS-200
Output/ hrs	Upto 6000 bottles Up To 9000 bottles Up to 12000 bottles
Motor	1HP/440 Volts/50 Hz 1.5 HP/440V/50 Hz. 1.5 HP/440 Volts/50 Hz.
ROPP Cap Diameter	13 mm, 20 mm , 32mm
Container Size	14 mm to 50 mm Diameter.25 mm to 100 mm (H)
Height Of Conveyor	750 mm to 840 mm.

Providing with S.S. conveyor, vibrator type. hopper with chute and pneumatic and variable speed arrangements.SS304 control panels and should consist of all switch gears.
Technical Specifications :-

Output/Hour:	2400 to 7200 Containers (Depending on bottle size)
Electrical Motor:	1HP/440 Volts/ 3Phase/ 50 Hz (Four wire) For Main Machine
Conveyor Height:	750 mm to 840 mm Adjustable.
Container Size:	22 mm to 100 mm, Maximum Height 210 mm
Cap Size:	19 mm to 56 mm (With the help of required change parts)
Overall Dimension:	1150 mm(L) X 650 mm(W) Approx

Salient Features:

• The unit is made compact & Versatile.
• S.S. Slat conveyor.
• S.S. Elegantly Matt Finished Body.
• Built in front control panel
• Vibratory Bowl.
• With A/c Drive & GMP MODEL

This is made using high quality raw material and is offered at competitive rates to our clients spread all across the globe. These are available with following technical specifications and features-
Salient Features:-

• Suitable for overlap labeling and flag type labeling where the length of label is more than circumference of the container.
• A highly efficient vacuum pump develops just sufficient vacuum to hold labels- big or small on the pick - up cylinder.
• Flat Bottle Attachment System [Optional].
• Complete protection of the motors is ensured by the contractor and relays of appropriate rating.
• No container , No label - an electrical sensing device avoids wastage of labels
• Minimum change over time is required form one size of container or label to another. .CGPM model controlled by A/C frequency drive.

Technical Specifications:

Model No	KHL -150
Direction of Movement	Left to Right
Output/ Hours	Up to 9000 Nos. of round containers[ Depending on the size of the container or the label]
Electrical Rating	1 Hp Main motor, 230 Volts, 50 Hz.0.5 Hp- Vacuum motor,415 Volts, 50 Hz.
Structure	Top stainless steel matt finish & mild steel body cladded in SS 304 sheet.
Label Length	20 mm to 140 mm & Width 16 mm to 90 mm.

We offer Automatic self adhesive vial bottle labeling machine, which is offered at industry leading prices. These are High Production Speeds UP to 200 per minute. Stainless steel 304 Construction.GMP Design. Accurate label placement.
Salient Features:-

• High Production Speeds UP to 200 per minute.
• Stainless steel 304 Construction.
• GMP Design
• Accurate label placement.
• Unrivaled build quality and reliability.
• Full Pharmaceutical security Package including counter
• Secondary pressure unit.
• Equipped with online printing device.
• No change parts for change of container & label size.
• Single point online speed variation control system.
• Label data inputs not required due to auto label length detection system.
• Machine with pressing unit.
• Speed control by a single knob.
• Imported Bontiglioli motor with Gear box. [Made in Italy]
• All Electrical Items are TeleMechanic Made in Germany

Technical Specifications:

Model No	KASAL -200
Output/ Hours	Up to 12000 containers[ Depending on the size of the container or the label length]
Power Characteristics	230 Volts AC 50 Hz
Construction	Top Stainless steel matt finish, covered with S.S.304 sheet.
Over all Dimensions	Approx 1835 mm (L) 600 mm (W) 1250 mm (H)

Input specification

Round container dia	20 mm to 90 mm
Label	30 mm to 180 mm Length & 20 mm to 100 mm Width
Label Roll Diameter	Max. 300 mm

Automatic Self Adhesive Double Side Labeling Machine are technically advanced machines, which is used for labeling.Characteristics of these machines are-

• Stainless steel 304 Construction.
• In built A.C. frequency drive Adlee power made in Taiwan
• GMP Design
• Accurate label placement.
• Unrivaled build quality and reliability.
• Imported Bontiglioli motor with Gear box. Made in Italy
• Full Pharmaceutical security Package including counter secondary pressure unit.
• No change parts for change of container & label size.
• Single point online speed variation control system.

Technical Specifications:

Model No	KASFL -150
DIRECTION OF MOVEMENT	Left to Right
Output/ Hours	40 TO 80 ROUND CUM FLAT Containers two side (Depending on the size of the container or the label length)
Electrical Motor	0.25 HP/1400 RPM for conveyor drive
Power Characteristics	230 Volts AC 50 Hz
Construction	Top Stainless steel matt finish, covered with S.S.304 sheet.
COMPRESSOR AIR	4 to 6 Bars. (Only for printing device)

Input Specifications:

ROUND CUM FLAT Container Size in mm	25 mm to 225 mm Length 35 mm to 180 mm Width
Label	30 mm to 180 mm Length 30 mm to 200 mm width
LABEL ROLL DIAMETER	Max. 300 mm.
OVER ALL DIMENSIONS	2250 mm (L) 1050 mm (W) Adjustable Height 800 to 850 mm

The automatic dosing cup placement machines is offered under the following technical specifications, such as-
Technical Specifications:-
Process & Operation Data

Capacity	80-120 bottles/min.
Bottle sizes	10 ml - 500 ml
Bottle movement	left to right

Mechanical design data Design code GMP Model Over all Dimensions(L X W X H) 5' X 3' X 6'

Bottle diameter	22 to 100 mm
Bottle height	50 to 210 mm
Cap sizes	22 to 56 mm

M.O.C.

Contact Parts	SS 304
Non Contact parts	SS 304

Finish

Contact Parts	180 Griff Matt finish
Non Contact parts	Matt finish

Enclosure

Internal finish	Smooth easily cleanable
External finish	Matt finish 180 Griff

Main Components

• Cup pressing Unit Providing with S.S. conveyor, vibrator type
• Hopper with chute and pneumatic and variable speed arrangements.
• Conveyor S.S. Slat conveyor S S 304
• Control panel SS 304 control panels and should consist of all switchgear.
• Electrical 380 V, 3Ph, 50Hz, Telemechanic make.
• Main M/co Main Drive 1 HP, 220 volt, 3 phase
• RPM 1440
• Electric Load 1 HP
• A/C DRIVE. ADLEE POWER, TAIWAN
• Hopper Vibrator type.

This filter press machine consists of a sturdy S.S 304 quality shell with top cover held in place with tightening bolt. A filter cartridge assembly consisting of several horizontally arranged disc type filter plates with perforated supporting screen, filter media inter locking cups is fitted with the center of this shell. The entire assembly complete with pump and piping connection is mounted on a suitable trolley with caster for easy movements. Technical Specification:-

• Available in varying size of 8"/ 14"/ 18"/ 24" dia of plate with various combination of on of plates.
• Reverse flow design for practically zero hold-up.
• Offered on common skid with filter aid dosing system.
• Shell thickness is suitable to withstand higher pressure for long time.
• Diaphragm type SS 316 / SS 304 pressure gauge.
• Suitable pump can be integral part of the assembly.

Technical Specifications

Model	Ø 14”x 10 No.
Dia of Plate	14”
Ht of Plate	50 mm
No. of Plate	10
Filtering Area M5/Lt	0.9240.
Tank Dia	14”
Capacity Ltrs/ Hrs	1200
Centrifugal Pump	Q
Motor	2 HP

These are special self- aligning packing conveyor belt machine, which ensures smooth and trouble free rotation of the Roller.
Specification:

Electrical Load	Depends upon the length Of conveyor belt.
Height	815 mm with 75 mm Adjustable Height.
Width	Table Top of 12” working Space on both side of the Conveyor Belt.

Optional:

• Extra table at the end of machine.
• S.S Chain instead of PVC belt.
• Folding table at the end of machine.