Technical Specifications:

MODEL	KCM300	KCM500
Max. Turning DiaTfieter	160mm	250mm
Max. Turning Length	300mm	500mm
Admit Between Centres (max.)	450	650

SPINDLE
Taper in Spindle	MT5	MT5
Spindle Bore	35mm	35mm
Spindle Speed	2200/2400	1440/1800
Spindle Motor	5H.P	7.5H.P

COPYING SLIDE
Max. Stroke	90 mm	90mm
Tool Cross Section	25x25 mm	25x25 mm
Theoretical Thrust	300 kg	300 kg
Profile Surface Angle Turned	-30-+90	-45-+90

TAIL STOCK
Max. Travel of Quill	50 mm	90mm
Toper in Quill Bore	MT4	MT4
Manual Travel	200 mm	400 mm
Quill Diameter	100 mm	100 mm

HYDRAULICS
Tank Capacity	100 Ltrs.	100 Ltrs.
Pump Capacity	9.1 lmn	9.1 lmn
Motor	2 HP	2 HP

OVERALL DIMENSIONS
Length	2080 mm	2400 mm
Width	1220 mm	1220 mm
Height	1755 mm	1755 mm
Net Weight	2000 Kgs	2400 Kgs

Technical Specifications:

MODEL	K2CM300
Max. Turning DiaTfieter	160mm
Max. Turning Length	300mm
Max Borb Dia	100mm
Width	1500
SPINDLE
Taper in Spindle	MT5
Spindle Bore	35mm
Spindle Speed	2200/2400
Spindle Motor	5H.P
COPYING SLIDE
Max. Stroke	90 mm
Tool Cross Section	25x25 mm
Theoretical Thrust	300 kg
Profile Surface Angle Turned	-30-+90
TAIL STOCK
Max. Travel of Quill	50 mm
Toper in Quill Bore	MT4
Manual Travel	200 mm
Quill Diameter	100 mm
HYDRAULICS
Tank Capacity	100 Ltrs.
Pump Capacity	9.1 lmn
Motor	2 HP
OVERALL DIMENSIONS
Length	2080 mm
Width	1220 mm
Height	1755 mm
Net Weight	2000 Kgs

Technical Specifications:

MODEL	KSM300
Max. Turning DiaTfieter	160mm
Max. Turning Length	300mm
Admit Between Centres (max.)	450
SPINDLE
Taper in Spindle	MT5
Spindle Bore	35mm
Spindle Speed	2200/2400
Spindle Motor	5H.P
SLIDE
Max. Stroke(y-axis)	100 mm
Max. Stroke(x-axis)	300 mm
Feed(Both Axix)	Variable
TAIL STOCK
Max. Travel of Quill	50 mm
Toper in Quill Bore	MT4
Manual Travel	200 mm
Quill Diameter	100 mm
HYDRAULICS
Tank Capacity	100 Ltrs.
Pump Capacity	9.1 lmn
Motor	2 HP
OVERALL DIMENSIONS
Length	2080 mm
Width	1220 mm
Height	1755 mm
Net Weight	2000 Kgs

Technical Specifications:

MODEL	KCM150F
Max. Facing Diamed	300mm
Max Defth of Compo	90mm
SPINDLE
Taper in Spindle	MT5
Spindle Bore	35mm
Spindle Speed	2200/2400
Spindle Motor	5H.P
COPYING SLIDE
Max. Stroke	90 mm
Tool Cross Section	25x25 mm
Theoretical Thrust	300 kg
Profile Surface Angle Turned	-30-+90
TAIL STOCK
Max. Travel of Quill	50 mm
Toper in Quill Bore	MT4
Manual Travel	200 mm
Quill Diameter	100 mm
HYDRAULICS
Tank Capacity	100 Ltrs.
Pump Capacity	9.1 lmn
Motor	2 HP
OVERALL DIMENSIONS
Length	2080 mm
Width	1220 mm
Height	1755 mm
Net Weight	2000 Kgs

Machines are of Rigid, Construction having separate spindle head for both side Facing & Center Drilling operation. Job clamping is in VClamp Hydraulic Vice. Centre Slide and Drilling Spindle Slides are hydraulically operated. Milling spindles mounted on precision mechanical slide for ea5e'i!l. setting. Machine is very suitable for Shafts, Components for Automobiles including Forging which needs Facing & Centre Drilling operation at one or both ends.

Technical Specifications:

ITEM	MODEL: RFC-500	MODEL: RFC-600H
Motor for Milling & Drilling Spindle	3 H.P. 3 Phase 1440RPM (Two motors)	3 H.P. 3 Phase 1440RPM (Two motors for Milling)
		l.5H.P. 3 Phase 1440RPM (Two motors for Drilling)
Hydraulic Power Pack Motor	2 H.P. 3 Phase 1440RPM	2 H.P. 3 Phase 1440RPM
RPM: Milling Head	400	400
Drilling Head	900	900
Job Range: Length	150mm - 500mm	150mm - 600mm
Diameter	15mm - 50mm	20mm - 70mm
Pump Output	18Ltrs/mt. [Variable Displacement Vane Pump]	18Ltrs/mt. [Variable Displacement Vane Pump]
Hydraulic Feed Control	0- 60mm/Sec.	0 - 60mm/Sec.

These machine specially developed for different type of ceiling fan cover and exhaust cover.

These machine specially developed for ceiling fan rotor and exhaust rotor.

These machine are manufactured as customer required for specific operation . we manufacture press up to 250 tons.

Technical Specifications:

MODEL	5660	7090	10.14	1020
Stroke of Tracing , Slide in mm	60	90	140	200
Minimum centre Height from top of . cross slide in mm	105	115	155	155
Max. Dia of Round Master in mm	90	90	200	200'
Max. Length of Master in mm	1000	1000	2000	20,00
Hydraulic Working Pressure in Kg/Cm2	18	18	14	14"
Pump Output in LT /Min	8	8	16	16
Power Pack H.P	1	1	1.5	1.5
Theoretical thrust in Kg Recommended tool shank in mm	190 20x20	300 25x25	470 32x32	470 32x32

• "Specifications and illustrations are subject to change without prior notice."

The Power Pack is equipped with gear type positive displacement pump and is available with single and dual delivery as required. Gears are ground to render noiseless service.

Technical Specifications:

MODEL	SD-8	SD-16	DD-88
TYPE	Single Delivery	Single Delivery	Dual Delivery
Pump output in Itr/min of each delivery	8	16	8
Pressure in kg/cm2	18 .	18	1.8
Horse Power	-1	1.5	1.5

Technical Specifications:

MODEL	SC 5660	SC 7090
Copying Stoke in mm	60	90
Longitudes stroke in mm	2U0	200
Minimum center Ht from top of cross slide in mm	170	185
Max dia of Round Master in mm	90	90
Max length of master in mm	250	250
Max length of job in mm	200	200
Working Pressure in kg/cm2	518	15-18
Pump output(dual delivery) in Ltrs/mt	8	8
Power Pack H.P	15	1.5

These are few sample which are manufactured on our machine .we can supply machine component as per customer requirement