We offer wide range of precision engineered hand pumps which are manufactured using superior grade of mild steel plates, mild steel rods and squares for robust above the ground structure and stainless steel/brass for underground the components.

Types of Hand Pumps:

KWP make India Mark II Deep well Hand Pumps

Salient Features

• The spout design will not cause any problem with any type of vessel normally used to collect water.
• Positive displacement pump and hence the discharge remains constant irrespective of the depth.
• Specially designed nitrile cup washers give long service even in aggressive waters.

KWP make India Mark III Deep well Hand Pumps

KWP make Extra Deep well Hand Pumps

Salient Features

• Water can be pumped from deeper wells upto 90 mtrs.
• Most of the components can be interchanged with India Mark-II pump.
• To keep operation effort with in the limit higher cross section handle bar with counterweights and extra leverage is provided.
• Rod centralizers may be provided to stabilize connecting in the bore holes.

KWP make Afridev Deep well Hand Pumps

Salient Features

• Water can be pumped from deeper wells upto 45 Mtrs.
• True VLOM(village level operative maintenance) pump.
• High discharge rate.
• Routine maintenance can be carried out with minimal maintenance.
• Only one tool is required for maintenance of the pump.
• Light weight pump rods.
• Low cost, simple to replace, twin polymers bearings at fulcrum and rod hanger.
• All wearing parts are either plastic or rubber and can be replaced at low cost.
• Large diameter section tube reduces intake velocity, minimising sand entry into pump cylinder.

Direct Action Hand Pumps

True VLOM, High discharge rate, routine maintenance with minimal, only one tool is required, light weight rods.

We offer good quality submersible pumps for various purposes. Our range if submersible pumps are manufactured to deliver efficient output even for longer hours of work. These submersible pumps consume less electricity. The special thrust bearing design with a stainless steel jacket provides durability. These submersible pumps are water-lubricated and noiseless. The best part of these pumps is the easily rewindable.

We offer to our clients superior quality LPG cylinders to choose from. Our extensive industry experience, technically advanced machinery equipment and expertise of our work force enables us to successfully do the involved fabrication job with a very high degree of quality control.

Salient Features

• The Capacity of our Cylinders ranges from 2.3 to 50 Kgs.
• The cylinder is fitted with a valve protection ring.
• Cylinder is tested at a pressure of 25.35 Kg/sqcm for ensuring better performance levels.
• Cylinder is blasted with steel shots and metalized with zinc spray.
• Cylinder is painted with a metallic red oxide primer and subsequently covered with signal red paint.
• Cylinder is tested for leakages and out of every batch of 400 cylinders, 3 cylinders are tested by the officer of Bureau of Indian Standards to maintain quality.
• The cylinders picked out are tested for acceptance and bursting as per the Indian & International Standards.

We manufacture various kinds of auto cylinders such as LPG containers, CNG containers, Toroidal cylinders etc., for automotive usage. We provide technically perfect and leak proof auto cylinders for various types of automotive. These cylinders are available in different dimensions and diameters. Our cost-effective range of auto cylinders is made up of premium quality metal with sufficient thickness and heat-resistance. Our range of auto cylinders can also be customized as per the specific requirements.

We supply KPVL brand single burner, two burner, three burner & four burner LPG Stoves with Auto Ignition & Non Auto Ignition.

Features

• All round beading.
• Tri Pin Brass Burner
• Unique Pan Supports
• 100% Stainless Steel

We supply high-quality, value-for-money, and extremely safe pressure cookers which are outer-lid types. It is a faster than ordinary cooking methods.

Features

• Stainless Steel & aluminium body
• Gasket Release System
• Anti Implotion Lid
• Gasket Release Vent System
• Safety Weight Valve
• Safety Valve
• Handle & Flame Guard
• Gasket

We provide Galvanized Iron pipes with different specifications as per the industry norms. These pipes are widely applicable in Water pumps, Steam & Gas diffusion, Air Lines etc. These pipes are manufactured using good quality steel and these are available in various length and diameters. These pipes require low maintenance and these are rust & corrosion free. We also take bulk orders for customized requirements from clients.

We manufacture and provide various types of PVC casing and screen pipes widely used in bore-wells pumps. Our comprehensive range of products is cost-effective and provides good alternative in different piping applications. The main features of these products are:

• Close dimensional tolerances
  
• Light weighted without being weak
  
• Rigid construction without being brittle
  
• Cheaper per unit volume
  
• Availability in longer lengths
  
• Ease of joining
  
• Immunity from corrosion.