Join Free

My IndiaMART

Products

Suppliers

Sell Offers

Buy Leads

Tenders

Trade Shows

Company Directory > Industrial Supplies > Industrial & Engineering Goods >

Krishna International

Delhi

Year of Establishment: 1982
IndiaMART Member Since: 2005
Products [50]
Phone: +(91)-(11)-27376966

HOME

ABOUT US

PRODUCTS & SERVICES

SEND ENQUIRY

Products & Services

Sitemap

New Items

3 Way Universal Tilt And Swivel Angle Vice

SIZE IN INCHES	4
WIDTH OF JAWS IN MM	100
DEPTH OF JAWS IN MM	40

Product Code:

ART603

Bimetal Bandsaw Blades

SIZE IN MM	SIZE IN INCH	CONSTANT PITCH	VARIABLE PITCH

13 x 0.65	1/2 x 0.025	6, 10, 14 TPI	8/12, 10/14 TPI
13 x 0.90	1/2 x 0.035	3, 4, 6, 8, 14 TPI	8/12, 10/14 TPI

Product Code:

ART1707

Carbon Steel Cut Thread Hand

SIZE IN INCHES	THREAD PER INCH				STANDARD PACKING
	B.S.W.	B.S.F.	U.N.F.	U.N.C.	STANDARD PACKING

1/16	60/1.2	--	--	--	Ten
3/32	48/1.7	--	--	--	--
1/8	40/2.55	--	--	--	--

Product Code:

ART301

Carbon Steel Cut Thread Hand Taps

SIZE IN INCHES	T.P.I.	STANDARD PKG.	SIZE IN INCHES	T.P.I.	STANDARD PKG.

11/64	40	Ten	5/32	40	Ten
3/16	28	Ten	3/16	40	Ten
15/64	28	Ten	7/32	40	Ten

Product Code:

ART305

Carbon Steel Cut Thread Hand Taps

SIZE IN MM	PITCH	STANDARD PACKING	SIZE IN MM

2	0.4/1.6	Ten	2.5x.45/2.0
3	0.5/2.5	--	2.6x.45/2.1

Product Code:

ART303

Carbon Steel Metal Cutting Bandsaw Blades

SIZE IN MM	SIZE IN INCH	TEETH PER INCH

10 x 0.63	3/8" x 0.025"	8/10/14/18/24
12.5 x 0.63	1/2" x 0.025"	6/8/10/14/18/24

Product Code:

ART1704

Cast Iron Angle Plates

SIZE IN MM (LxBxH)	GRADE	DEVIATION EXPRESSED IN MICRONS (0.001 mm)
SIZE IN MM (LxBxH)	GRADE	FLATNESS OF WORKING FACES	SQUARENESS OF EXTERIOR FACES OVER DIMENSION H	PARALLELISM OF OPPOSITE FACES AND EDGES OVER THEIR TOTAL LENGTH	SQUARENESS OF EBD FACES W.R.T. EXTERIOR FACES AS MEASURED OVER DIMENSION L

1000 x 900 x 1200	1	30	60	65	65
	2	150	300	325	325

Product Code:

ART103

Cast Iron Box Angle Plates

SIZE IN MM (LxBxH)	DEVIATION EXPRESSED IN MICRONS (0.001 mm)
SIZE IN MM (LxBxH)	GRADE	FLATNESS ON WORKING FACES	SQUARENESS OF ADJACENT FACES OVER H	PARALLELISM OF OPPOSITE WORKING FACES

750 x 450 x 600	1	10	18	20
	2	50	100	113

Product Code:

ART105

Cast Iron Straight Edges

size in mm (bxhxl)	deviation expressed in microns (0. 001 mm)
size in mm (bxhxl)	parallelism of working surfaces	straightness of working surfaces	squareness of side faces w. R. T. Working faces	parallelism of side faces

25 x 40 x 300	7	5	25	75
30 x 60 x 500	10	7	30	105

Product Code:

ART104

Cast Iron Surface Plates

SIZE OF PLATE	MAXIMUM DEVIATION FROM FLATNESS OVER THE ENTIRE AREA EXPRESSED IN MICRONS		WEIGHT IN KGS. (APPROX.)
SIZE OF PLATE	GRADE 1	GRADE 2	WEIGHT IN KGS. (APPROX.)

400 x 400	7.5	-	50
630 x 400	7.5	30	96

Product Code:

ART101

Complete Pipe / Conduit Die Set

SIZE IN INCHES

1/2

3/4

1.1/4

1.1/2

Product Code:

ART314

Complete Tap And Round Die Sets

SIZE	NO. OF SIZES	SET NO.

1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 BSW	7	201
1/8, 5/32, 3/16, 7/32, 1/4 BSW	5	203
1/4, 5/16, 3/8, 7/16, 1/2 BSW	5	205

Product Code:

ART309

Complete Taps And Two Piece Die Sets

SIZE	NO. OF SIZES	SET NO.

1/4, 5/16, 3/8, 7/16, 1/2 BSW	5	101
1/4, 5/16, 3/8, 7/16, 1/2 BSF	5	103
1/4, 5/16, 3/8, 7/16, 1/2 UNF	5	105

Product Code:

ART313

Compound Angle Table - Rectangular

SIZE IN INCHES	9 x 7
SIZE OF TABLE IN MM	225 x 175
HEIGHT OVERALL IN MM	200

Product Code:

ART644

Compound Angletable-Round

SIZE IN INCHES	9
SIZE OF TABLE IN MM	225
HEIGHT OVERALL IN MM	190
LENGTH OVERALL IN MM	390

Product Code:

ART645

Gp Saws

SIZE IN MM	TEETH PER INCH

375	4, 6, 10, 14

Product Code:

ART1705

Granite Surface Plates

SIZE OF PLATE	FLATNESS TOLERANCE IN mm, FOR ACCURACY GRADE				WEIGHT IN KGS. (APPROX.)
SIZE OF PLATE	GRADE OO	GRADE O	GRADE 1	GRADE 2	WEIGHT IN KGS. (APPROX.)

250 x 250	2	5	12	25	10
300 x 300	2	5	13	26	22

Product Code:

ART102

Hacksaw Blades

High Speed Steel Hacksaw Blades have exceptionally good wear resistance and cuts through all types of materia including Alloy Steel and Stainless Steels.
Low Alloy Steel Hacksaw Blaes are recommended for cutting relatively softer materials such as non ferrous metals (Aluminium, Brass, Copper, Bronze etc.), Mild Steels etc

Product Code:

ART1701

Hacksaw Frames

AVAILABLE IN THREE OPTIONS

HACKSAW FRAME TUBULAR - Steel Handle with Blade. Size : 12"(300 mm)
HACKSAW FRAME FIXED - With Wooden Handle. Size : 12" (300 mm)
HACKSAW FRAME JUNIOR - With Plastic Handle. Size : 6" (150 mm)

Product Code:

ART1702

Hand Hacksaw Blades

SIZE IN MM	SIZE IN INCH	TEETH PER INCH

250 x 12.5 x 0.63	10 x 1/2 0.025	14
250 x 12.5 x 0.63	10 x 1/2 0.025	18

Product Code:

ART1708

Hardened & Ground V Blocks

IN BUILT FEATURES

'V' Blocks are hardened & ground to 60 HRC to 63 HRC.
Precision 'V' Block for Tool Room, Inspection Work, Assembly Shop.
All sides precision ground, parallel and square.
'V' groove ground, central and parallel to sides & base, perfect aligned in matched pairs within + 3 microns.
Supplied with Clamp for holding job.
Hold Square and Round Work.
Permits grinding ends of work square with sides.
'V' Blocks are so designed that clamps do not protrude over the sides.
'V' Blocks can be used on the sides.

Product Code:

ART207

Hardened & Ground V Blocks

IN BUILT FEATURES

'V' Blocks are hardened & ground to 60 HRC to 63 HRC.
Precision 'V' Block for Tool Room, Inspection Work, Assembly Shop.
All sides precision ground, parallel and square.
'V' groove ground, central and parallel to sides & base, perfect aligned in matched pairs within + 3 microns.
Supplied with Clamp for holding job.
Hold Square and Round Work.
Permits grinding ends of work square with sides.

Product Code:

ART208

Hardened & Ground V Blocks

IN BUILT FEATURES

'V' Blocks are hardened & ground to 60 +2HRC.
Precision 'V' Block for Tool Room, Inspection Work, Assembly Shop, Marking.
All sides precision ground, parallel and square.
'V' groove ground, central and parallel to sides.
Supplied with Special Clamp for holding job.
Hold Square and Round Work..

Product Code:

ART209

Hardened & Ground V Blocks

IN BUILT FEATURES

Hardened Steel with hardened clamps and screw.
Design leaves entire top surfaces of work accessible.
Groove on bottom is 16 mm wide and 3 mm deep for use as a tennon slot on a machine table.
Has 12 mm Center Hole.
Supports Round, Square or Rectangular Work.
Tennon Slot Central with 'V' within 0.010 mm.
'V' Parallel with bottom within 0.005 mm.
'V' Groove Central within 0.005 mm.
'V' Angle is 90º + 1/2º.

Product Code:

ART210

High Speed Centre

FEATURES

Suitable for high speed machining applications as in case with All Geared Lathes, Copy Turning Applications, CNC Lathes, CNC Machining Centers etc.
Capable of withstanding very high rpm at high loads.
High precision angular contact bearings used to ensure prolonged life at high rpm.
Bearings protected against dirt and coolant by special coolant sealing arrangement.
Bearing lubricated for life using high quality German make Kluber grease.
Extended point ensures unhindered tool approach.
Draw off nut available against request.

Product Code:

ART1403

Jigsaw Blades

SIZE IN MM	TEETH PER INCH

375	4, 6, 10, 14

Product Code:

ART1706

Levelling Plates

IN BUILT FEATURES

Simplifies Levelling.
Single Plate with solid three point bearings.
Fine Pitch adjusting screw.
Hardened and ground work surface flat within 0.010 mm.
Reference hole at the center of pivot point facilitates location of work..

Product Code:

ART260

Magnetic Rectanglar Blocks

SIZE IN MM

25L x 25W x 25H

75L x 56W x 60H

100L x 70W x 70H

150L x 70W x 85H

Product Code:

ART206

Magnetic Universal Blocks

SIZE IN MM	PULL KG.

75L x 50W x 60H	75

Product Code:

ART203

Magnetic V Blocks

MODEL	SIZE IN MM	CLAMPING RANGE	PULL KG.

2" V Block [Standard]	40L x 50H x 40W	3 - 25	25
2" V Block [Hardened]	40L x 50H x 40W	3 - 25	25
3" V Block [Standard]	75L x 75H x 56W	5 - 40	75
3" V Block [Hardened]	75L x 75H x 56W	5 - 40	75

Product Code:

ART201

Magnetic V Blocks

SIZE IN MM	CLAMPING RANGE	PULL KG.

100L x 75H x 55W	5 - 65	50
110L x 75H x 55W	5 - 65	50
150L x 100H x 65W	5 - 75	75
150L x 100H x 65W	5 - 75	75

Product Code:

ART202

Pipe Centre

FEATURES

Body made from Alloy Steel and hardened to 55-58 HRc.
Shank made from Alloy Steel and Toughened.
Precision ground.
Max Radial runout 0.015 mm.
Max Speed 700 RPM. High Speed Pipe Centre available on request.
60° Angle as Standard. 75° and other angles available on request.
Available in 2 basic types : Blunt & Pointed.

Product Code:

ART1413

Precision Angle Plates

in built features

made from alloy steel hardened to 55 to 60 hrc.
all sides are precision ground, flat, parallel and square within + 0. 004 mm.
ideal for quick machine set ups or inspection.
deep step in 100 mm x 100 mm x 115 mm.
angle plate plus 'v' to hold cylindrical parts with or without shoulders.
25 m8 tapped holes.
supplied with adjustable slide clamp.

Product Code:

ART261

Precision Angle Plates

IN BUILT FEATURES

High precision solid one piece alloy steel construction.
It is hardened to 58 - 62 HRC.
Ground flat, square and parallel.
The M10 Tap Hole allows the use of standard., readily available accessories.
Accuracy for Flatness, Squareness and Parallelism is + 005 mm..

Product Code:

ART262

Precision Tilting & Swivelling Vice

SIZE IN INCHES	4	6
WIDTH OF JAWS IN MM	100	150
DEPTH OF JAWS IN MM	40	50

Product Code:

ART602

Revolving Centre

FEATURES

All Centers are povided with 'Coolant Sealing Provision' to prevent entry of coolant and metal chips / swarf into bearing assembly.
Body made from alloy steel case hardened and tempered to a hardness of 32-40 HRc approx.
Point made from bearing steel and hardened to 60 HRc approx. for maximum wear resistance.
These Centres are precision ground.
Maximum radial run out 0.015 mm.
Each Revolving Centre is provided with an Inspection Report covering all critical parameters like run out, correctness of Morse Taper Shank Angle etc.
Spare points for all above types available..

Product Code:

ART1401

Revolving Centre - Carbide Tipped

FEATURES

All Centers are povided with 'Coolant Sealing Provision' to prevent entry of coolant and metal chips / swarf into bearing assembly.
Body made from alloy steel case hardened and tempered to a hardness of 32-40 HRc approx.
Point made from bearing steel and hardened to 60 HRc approx. for maximum wear resistance.
These Centres are precision ground.
Maximum radial run out 0.015 mm.
Each Revolving Centre is provided with an Inspection Report covering all critical parameters like run out, correctness of Morse Taper Shank Angle etc.
Spare points for all above types available.

Product Code:

ART1402