Sheet Metal Machinery

Heavy duty Motorised Guillotine Shearing machine fitted with blades, brake, front and back side gauges, sheet holding device and starter.

Heavy duty motorised hydraulic press brake equipped with double acting single stage hydraulic pump unit with powerpack, 5 H.P. AC 440/3/50 electric motor and starter, multigrooved vee block having main body frame work is fabricated from 25 mm thick M.S.Plate, centre to back 375 mm.

Heavy duty motorised floor, model spinning lathe with taper roller bearings, for spinning flatcans, light metal tuning, smoothening, trimming, beading curling complete with beading and trimming attachment, motorisation attachment motor pulley, vee belt suitable H.P.A.C 440/3/50 electric motor and switch.

Heavy duty swing beam type hand operated universal sheet and plate edging, bending and folding machines are designed for edging bending, and folding mild steel sheets. Maximum opening between the upper and lower beams 1.1/2". Adjustment to bending beam up & down 1/2", adjustment to clamping beam forward and back 1/2", complete with one sharp nose taper blade (fitted) ,weights (2 pcsor 4 pcs.to suit the capacity of the machine) adjustable angle selecter with stop.

Heavy Duty Hand Operated Geared Shearing machines suitable for cutting sheets in unlimited length round or square bars, angle, 'T' etc. complete with handle.

Motorised geared heavy duty nine rolls sheet straight ening machine equipped with nine rolls running in bushes suitable for straightening plates upto 1.6 mm (16 swg) sheets complete with 5 H.P. AC 440/3/50 electric motor, switch and belt maximum width of sheet admitted 910 mm.

Heavy duty initial pinch precision bending roller equipped with 3 roller of 73 mm dia. having capacity to admit maximum width of sheet 1250 mm, capacity in M.S.3mm complete with 1.5 HP.AC 440/3/720 RPM Indian make motor and switch.

Heavy duty hand operated trunk folding machines specially suitable to form heavy and large right angle and curved folds on the sides of the trunks and also suitable for folding the sides of trays and various other similar articles with help of suitable dies, operation through the bed by eccentric shaft raising and lowering the top beam, top beam has adjustment for height.

Heavy duty geared steel body presses with adjustable stroke, AC 440/3/50 electric motor & starter.

Heavy duty all steel construction hand or motorised hydraulic presses with two stage hand pump. The low pressure pump is used for rapid advance of piston at low pressure motorised models are supplied with suitable AC 440/3/50 electric motor & starter. 

Heavy duty hand operated arbour presses are designed for production work of quick operation in general engineering workshops, automobile workshops, gauges etc. for driving mandrels in and out of work, and can also be used for inserting and removing bushes, bearings etc., They do not bend or burr the work of necessitate taking off carrier and will prove a saving of time and increased life of arbours.

Heavy duty impact press with adjustable striking load , the adjustable arm and wide throat permit using the press in various industries like electrical control equipment, switch gear, domestic appliances, radios, telephones, equipment, ammunition, automobile ancilarreis etc.

Heavy duty hand operated double body fly presses, with adjustable vee guides,complete with two catch dogs,and fly wheel.