Workshop Machinery

Standard Accessories

• Face Plate
• Chuck  Plate
• Motor Plate
• 3 Pin Steady Rest
• 2 Pin Follow Rest
• Change Gear Set (Inches & Metric)
• Thread Dial Indicator
• 4 Way Tool Holder
• 2 Nos. Dead Centers (Hardened & Ground)

Optional Accessories

• 4 - Jaws Independent Chuck
• 3 - Jaws Self Centering Chuck
• Electric Motor
• Switching Equipment (Reverse / Forward Switch)
• Motor Pulley
• Set of Vee Belts
• Full Norton Gear Box
• Extra Feed Shaft

Specialization

 

• Hardened Bed for Long Life
• As per ISI specification Accurate

 

Heavy duty motorised S.S. & S.C.heavy duty change gear type with 3 speed gear box gap bed lathes having head stock spindle equipped with taper roller hearings or in gun metal bearings with set of gears,travelling 7 fixed steady face plate,four way tool post,tread dial indicator,2 m.T. centres suitable AC 440/3/50 electric motor & switch.

Heavy duty 5mm capacity high speed bench tapping machine,v-belt drive with instantaneous control to change rotation of tap,complete with 1/4'x3 jaws chuck with key,electric motor with switch,having tapping capacity 5 mm table travel 40mm,distance spindle to columns 85 mm,distance chuck to work 170 mm,size of table 160x130 mm dia. of column 38 mm range of speeds r.p.m 530-810-1180-1730-2500 h.p of motor 0.25

Heavy duty motorised pedestal or bench type geared drilling machines fitted with ball and taper roller bearings for smooth and accurate running,provided with depth stop,rotating table on model 40 G & 31 G while tilting and rotating table on other models, tool tray,suitable A.C. electric motor,pulley belt and reversing switch having following specifications.

Heavy duty motorised double geared slotting machine complete with T- Slotted round rotating table,suitable AC. 440/3/50, 1400 R.P.M. electric,pulley,V-belt and starter.

Heavy duty  motorised shapping with suitable H.P.A.C. 440/3/50 electric motor, starter,vee belt,pulley,swivel base machine vice with handle.

Heavy Duty double column rack driven motorised planning machine, with suitable HP, AC 440/3/50, 1440 RPM electric motor, starter, complete with single tool post with swiveling head to permit angular cuts with automatic lubrication system.

Heavy duty motorised sliding,surfacing and screw cutting floor model lathes having head stock spindle  fitted with taper roller bearings and thrust bearings for correct allignment and cutting, complete with norton type gear box/or semi norton type,motorisation attachment,tray,suitable H.P. AC. 440/3/50 electric motor reversing switch,travelling and fixed steady rest and face plate.

Heavy duty all gear head combined captan & turret lathe suitable for metal turning,facing centring,drilling, boring,recessing,boring,reming cutting internal external threads, knuring etc. having headstock spindle ruiing in taper bearings and give six different operating speeds,dopuble tool post cross slide with automatic cross & longitudinal feeds as well as hand feed complete with six way self indexing hand feed turret head with adjustable stops 440/3/50 electric motor switch,mechanical coolant pump,light fittings,collect and bar feeding attachment.

Heavy duty brass screw turing, boring & threading machine with rack drive double slide and collet attachment complete with one collect but without electricals motor attachment,pulley and belt.

Motorized milling machines having main spindle made from steel and running in ball bearings, longitudinal traverse of table carried out through a gear box, high spindle speeds achieved through V belts while the minimum spindle speeds can be obtained through double back gear, (Except Model OA which is provided with hand feed is Un geared) graduated angle adjustment up to 45°, equipped with suitable AC 440/3/50, 1440 RPM electric motor and starter Standard Accessories

• Vertical attachment

Optional Accessories

• Electric Motors 
• Starter
• Belts
• Coolant Pumps
• Dividing Head
• Rotary Table
• Slotting Attachments 

 Heavy duty self opening conventry die -heads high precision self opening die heads are designed for cutting threads quickly and accurately. best results are obtained on centre lathes,capstan,authomatic  and other machines tools,They are robust tools,very easy to operate. The fitting and the removal of the chasers is simple and absolutely foolproof. Fie- heads are suitable for cutting right or left hand threads of any form and pitch.

 Heavy duty jaws independent dog chucks having reversible hardened and ground jaws with key.

Heavy duty jaws self centering true chucks with a set of hardened and ground extra reversible jaws & key.

Heavy duty motorised pipe & bolt threading machine designed for threading, pipe or bolts with die head having standard range for pipes from 1/4' to 2' and for bolts 1/4' to 2' euipped with 1/2 HP AC 440/3/50 or 220/1/50 electric motor,switch,thread length gauge,oil pump.

Heavy duty capacity motorised mechanical hacksaw machine equipped with hydraulic float device,automatic stop at the completion of cut,depth of cut is adjustable and can be set to stop the machine at any desired depth of cut,collant pump with fittings having capacity to cut round materials upto 6' dia.stroke 4',blade required 14'x1' complete with length gauge 1 HP.AC 440/3/50 electric motor and starter.

Heavy duty motorised hydraulic metal cutting hacksaw machine equipped with adjustable feed control device.Automatic lifting & lowering arrangement of saw frame after completion of cuts is incorporated which stop the motor automatically with suitable AC 440/3/50 1400 R.P.M. electric motor 7 starter.

Heavy duty hydraulic motorised horizontal metal cutting bandsaw machine to cut various ferrous and non ferrous metals like rounds,flats sections etc. having three different speeds by step V-pulleys,all steel fabricated body,simple anticlockwise motion to lever adjust pressure for cutting different metals and size equipped with hydraulic feed with automatic swing cut arrangemet complete with coolant pump.AC. 440/3/50 motor, switch.

Heavy duty  floor model high speed cut off machines for faster,stright or angular cutting off operations of angles,sections,tubes and bars,having spindle runs in preloaded bearings equipped with special  quick action vice to clamp the job instantly complete with AC.440/3/50 3000 R.P.M motor suitable for use with carbide tipped saw blade or abrasive cut off wheel tipped(or it can be specially made and supplied with lower speed motor for using H.S.S saw blade to cut non ferrous materials)starter,vee belt and guard (without blade or saw

Heavy duty small milling adda ideally suitable for small milling operation,spindle running in ball bearing. 3 speeds by step pulleys,milling slide operated by rack and pinion for fast movement or screw operated complete with 1/2 H.p.A.C. 440/3/50 motor, starter.

Heavy duty universal milling machines equipped with ball taper and thrust bearings,all the three travels are provided with automatic feed and are with adjustable stops,T slotted table provided with coolant grooves which swivels upto 45, complete with self motorised coolant pump with fittings,suitable electric motor and starter.