Krushna Enterprises
Krushna Enterprises

Home » Products »

LCR Meters

Leading Exporter and Supplier of LCR Meters such as Dual Display Auto Ranging LCR Meter, LCR Meter With Multimeter Functions, Digital Auto Scan PEN R/C Meter, Multifunctional LCR Meter With USB and Large Display Digital LCR Meter from Nashik.

Dual Display Auto Ranging LCR Meter

Dual Display Auto Ranging LCR Meter

Item Code: LCR-459



Features :

Basic accuracy 0.5% for Resistance, 0.7% for Inductance, Capacitance
Dual Displays provide quick tested results readouts, with L.C.R. display values up to 19999 counts
  and Q, D, R. display values up to 9999 counts
Excellent resolutions Resistance up to 0.001ohms. Inductance/Capacitance up to 0.1uH/0.1pF.
Test 4 parameters Ls+(Q,D,Rs), Lp+(Q,D,Rp)
Cs+(Q,D,Rs), Cp+(Q,D,Rp)
Auto-Power Off function To conserve battery life for longer use.
Fuse detection function To inform that the fuse is open or damaged.
PC communication port Provided optical standard RS-232 (Optional).
External DC Adapter functions Use of a DC adapter can also serve to disable Auto Power off function
Power Off function
Strong Protective Holster
Backlight Display
Set Hi / Lo limits using absolute values or percentage limits
Selectable Parallel or Series equivalent circuit.
Max / Min / Avg recording.
Built-in test fixture or use external test leads
Relative mode with zero reference or user supplied reference
Automatic blown fuse indication


LCR Meter With Multimeter Functions

LCR Meter With Multimeter Functions

Item Code: 306

3½ digit 1999 counts digital multimeter + LCR meter


features :


professional grade rugged dmm + lcr meter
display 3½ digit lcd display (1999 counts)
digit size 18mm(h)
over range indication ‘ol’ or ‘-ol’ is displayed.
en61010-1 approval protection class ii, pollution degree 2.
most rugged, easy use hand held meter.
max hold facility
operating temperature 0°c to 40°c
relative humidity < 70% non condensing
storage temperature -20°c to 60°c
relative humidity < 80% non condensing
power single, standard 9v battery.
dimension 200mm(l) x 90mm(w) x 40mm(h)
weight approx. 400g.
ohm, diode, continuity and frequency input protection.
auto range on frequency range and measurement upto 15mhz
capacitance, inductance, resistance, hfe, diode test & audible continuity check function.
accessories test leads, carrying case, user manual, battery.


Digital Auto Scan PEN R/C Meter

Digital Auto Scan PEN R/C Meter

Item Code: KM-503

This pen R/C meter for SMD could fast precise measure small chip components

Features :

  • Display : 3-¾ digits LCD display with max. reading 3999
  • Pollution degree : 2
  • Altitude : < 2000m
  • Operating Temperature : 0 - 40°C, <80% R.H. non-condensing
  • Storage Temperature : -10 ~ 60°C, < 70% RH, battery removed
  • Temperature Coefficient : 0.1 x (specified accuracy) / °C (<18°C or > 28°C)
  • Max. Voltage between terminals and earth ground : 50V DC or 36V AC rms.
  • Sample Rate : 3 times / sec for digital data
  • Over Range indication : LCD will display “OL”
  • Low battery indication : The “ ” is displayed when the battery is under the proper
    operation range
  • Auto power off : If there is no key been operated for 15 minutes, the meter
    will auto power off to save battery energy.
  • Diode Test
  • Power Source : 3.0V battery
  • Dimensions : 181(L) x 35(W) x 20(H) mm
  • Weight : Approx. 65g. (battery included)

ELECTRICAL SPECIFICATIONS :  Accuracy : ± (% of reading + number of digits) at 18°C to 28°C (64°F to 82°F) with relative humidity to 80%. (Caution when working with voltages above 50VDC or 36VAC rms)

Range Resolution Accuracy
400Ω 0.1 Ω ±(1.2% rdg + 3 digits)
1 Ω
40Ω 10 Ω
400Ω 100 Ω
4MΩ 1 kΩ
40MΩ 10 kΩ ±(2.0% rdg + 5 digits)
Range Resolution Accuracy
4 nF 1 pF ±(5.0% rdg + 5 digits)
40 nF 10 pF ±(3.0% rdg + 5 digits)
400 nF 100 pF
4 µF 1 nF
40 µF 10 nF
200 µF 100 nF

Range Description Test Condition
Display read approx.
forward voltage of
Forward DC Current :
approx. 1mA
Reversed DC Voltage :
approx 1.5V

Multifunctional LCR Meter With USB

Multifunctional LCR Meter With USB

Item Code: KM-520B




  • Auto LCR smart check and measurement 19, 999 / 1, 999 counts dual LCD display
  • Basic accuracy : 0.3% with resolution of 0.01%
  • Analog bar display
  • Measurement frequency up to 100KHz
  • Mini - USB interface (KM 520B only)
  • Sorting function
  • Relative measurement
  • Data hold
  • Back light, full angle for LCD display
  • 4 - terminal measurement configuration
  • Automatic power off
  • Battery and external power supply
  • Battery voltage indication


Large Display Digital LCR Meter

Large Display Digital LCR Meter

Item Code: KM-954MK-II




  • Professional Grade Digital LCR Mete
  • Diode Test
  • MAX HOLD & DATA HOLD facility
  • Low battery indication



  • Basic Accuracy : ±(0.3%rdg + 1dgt)
  • Display : 3½ digit LCD display (1999 Counts)
  • Digit Size : 17.5mm
  • Polarity : Automatic, positive implied, (-)
    negative polarity indication
  • Overrange : (OL) or (-OL) is displayed
  • Measurement Rate : 2.5 times per second,
  • Operating Temperature : 0°C to 40°C at
    <70% R.H.
  • Storage Temperature : -20°C to 60°C, 0 to
    80% R.H. With battery removed
  • Accuracy : Stated accuracy at 23°C ± 5°C,
    <75% R.H.
  • Power : Single 9V Battery.
  • Dimension : 200(H) x 90(W) x 40(D)mm
  • Weight : Approx. 400g. Includung battery


ACCESSORIES : Test leads pair, Carrying Case, Batteries installed, User's Manual & One Spare fuse installed 



Krushna Enterprises
Girish Pathak (Proprietor)
No. 21, Krushnai, Van - Vihar Colony, Opposite Parijat Nagar, Near Trishala Industries
Nashik - 422007, Maharashtra, India

Home  |   Profile   |  Products  |  Site Navigation  |   Contact Us

© Krushna Enterprises. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited