Laboratory Equipment

Dissolution Rate Test Equipment Single Stage
Dissolution rate test apparatus is designed to carry out simultaneously single test of dissolution rate of tablets & capsules as per usp standards. Ki dissolution rate test apparatus consists of constant temp. Water bath made of transparent acrylic. Temp. Is controlled by fully solid state controller within +/- 0. 5º c. The round bottom polycarbonate jars are placed equidistant inside the bath. The jars have acrylic lids which allow  passing of stirring shaft. The shafts are suspended from the top & are operated by the motors. The motors are electronically controlled to give speed precisely within +/- 1 rpm. The rpm is controlled digitally & is indicated on a digital display.   motor assembly can be lifted with auto lifting mechanism for easy  operation. Added feature, it is a microprocessor based digital pre-set timer with audio alarm.

Specifications:

• Speed: variable from 25 to 160 with accuracy of +/- 1 rpm
• Temperature: digital 5º c above amb. To 45º c accuracy +/- 0. 5º c
• Timer: µ processor based preset timer 00:01 to 99:59 hrs. With alarm
• Display: digital 12 mm red led for temp, speed, time
• Bath: made up of 6 mm thick clear acrylic
• Heater: 1000 watts stainless steel
• Sensor: pt-100
• Auto lifting assembly: -na-
• Jars: polycarbonate clear jars (1 no. )
• Power^  :   220 / 230v ac, 50 Hz
  

 
*Also available in 3 stage, 6 stage & 8 stage versions with auto lifting assembly.

µ Processor based with lcd display also available
   in 6 stage version only , for details check out
   the catalog.

100 / 110 v ac , 60 hz (on request).
design & specifications subject to change without notice.

Other Information

• Minimum Order Quantity: 1

Flocculator (Jar  Test Apparatus) 6 jars

Features

• Specially designed for use in water treatment plant as jar test apparatus
• Provides identical test conditions for all samples
• Stirring shaft can be removed without disturbing other stirrers
• Illuminator base made of acrylic sheet provides diffused cold light through floc. Samples

Specifications:-

• Speed: variable from 5 to 150 rpm's with accuracy of +/- 1 rpm
• Display: digital 12 mm red led display for rpm
• Jar: for 1000 ml x 6 nos
• Paddles: stirring paddles made of s. S. - 6 nos
• Illumination: fluorescent lamps
• Dimension: 930mm(l) x 250mm(b) x 480mm(h)

 

Jars are not a standard part of the equipment. Sold separately

Also available in 4 jars & 2 jars

Design & specifications subject to change without prior notice

Other Information

• Pay Mode Terms: L/C (Letter of Credit)

Dissolution Rate Test Equipment 6 Stage
Ki2341 plc dissolution rate test aparatus is designed to carry out simultaneously six tests of dissolution rate of tablets & capsules as per i. P. /b. P. /u. S. P. Standards. This unit consists of a microprocessor based circuitary, constant temp. Water bath made of transparent acrylic. Temp. Is controled by fully solid state controller within ± 0. 5º c. The round bottom polycarbonate vessels are placed equidistant inside the bath. The vessels have acrylic lids which allow passing of stirring shaft. The shafts are suspended from the top & are operated by the motor. The motor is programablly controlled to give precise rpm. The rpm is controlled digitally & is indicated on a lcd display. motor assembly can be lifted with auto lifting mechanism for easy operation. Added feature, digital timer comes with audio alarm.

Features:

• Microprocessor based controls.
• Brilliant 16 x2 lcd screen.
• Soft touch keyboard.
• 9 no. Routine test set in
  memory.
• 5 no. Sustain release test set
  in memory.
• Motorized stirrer platform for up / down movement.
• Programmable to meet all requirements.
• Printer compatible.
• Confirms to i. P. / b. P. / u. S. P. standards.

Specifications:

Number of test stations : 6
Vessels capacity : 1 litre.
Temp. Range (oc) : 0 - 50oc
Temp. Accuracy (oc) : ± 0. 5 oc
Stirrer speed (rpm) : 0 - 160
Stirrer speed accuracy
(rpm) : ± 1
Timer (hh:mm) : 00:00 - 99:59
Display : 16 x 2 lcd
Water bath (thickness) : 10 mm
Printer : compatible
Power supply^{^} : 220 v, 50 hz

^{^} 100 / 110 v ac , 60 hz (on request).

Design & specifications subject to change without notice.

Other Information

• Pay Mode Terms: L/C (Letter of Credit)
• Minimum Order Quantity: 1

KI2002d photoactometer is used to measure the
spontaneous or locomotive activity in MICE & RATS with the help of an advanced µcontroller System.

Features :-

•  µController Control

•  Programmable Timer upto 99’

•  5 Digit Digital Counter

•  Non-Visible Optical Sensors

Without µcontroller Models also available.

Specifications:

Timer            :    1 Min. To 99 Min.
   
Counter         :    1 to 99999

Sensors         :    Optical

Power          :   220 / 230V AC, 50 Hz

Waste Tray    :    Available

 

100 / 110 V AC , 60 Hz (On Request).

Design & Specifications Subject to Change Without Notice.

 

Other Information

• Pay Mode Terms: L/C (Letter of Credit)
• Minimum Order Quantity: 1

Dissolution Rate Test Equipment 6 Stage
Dissolution rate test apparatus is designed to carry out simultaneously SIX TESTS of dissolution rate of tablets & capsules as per USP standards. KI Dissolution Rate Test Apparatus consists of constant temp. water bath made of transparent acrylic. Temp. is controlled by fully solid state controller within +/- 0.5º C. The round bottom POLYCARBONATE jars are placed equidistant inside the bath. The jars have acrylic lids which allow  passing of stirring shaft. The shafts are suspended from the top & are operated by the motors. The motors are electronically controlled to give speed precisely within +/- 1 RPM. The RPM is controlled digitally & is indicated on a digital display.  Motor Assembly can be lifted with auto lifting mechanism for easy  operation. Added feature, it is a microprocessor based digital pre-set timer with audio alarm.

Specifications:

• Speed: Variable from 25 to 160 with accuracy of +/- 1 RPM.
• Temperature: Digital 5º C above amb. to 45º C,       accuracy +/- 0.5º C.
• Timer: µ processor based preset timer 00:01 to
• 99:59 Hrs. with alarm.
• Display: Digital 12 mm Red LED for Temp., Speed,Time.
• Bath: Made up of 10 mm thick clear acrylic.
• Heater: 1000 Watts Stainless Steel
• Sensor: PT-100
• Auto Lifting Assembly: Available
• Jars: Ploycarbonate clear jars (6 Nos.)
• Power:   220 / 230V AC, 50 Hz

 
^*Also available in 3 Stage & 8 Stage Versions with above specifications.
^#µ processor based with LCD Display Also available
   in 6 Stage version Only , For details check out
   the catalog.
^100 / 110 V AC , 60 Hz (On Request).

Design & Specifications Subject to Change Without Notice.

Other Information

• Pay Mode Terms: L/C (Letter of Credit)
• Minimum Order Quantity: 1

With rich industry knowledge and experience, we are able to manufacture and supply supreme quality centrifuge machine.  The offered machine is extensively used in various pharmaceutical industries due to its reliable performance, durable finish standards, dimensional accuracy and robust construction. This product is manufactured using class materials obtained from leading sources in the market.

 

Technical Specifications:

• Capacity: 6 tubes
• Lid lock
• Speed control: Analog
• Power requirements: 220V
• Plug and Power lead provided

 

3. Rotary Vacuum Film Evaporator (Buchi Type)

Our extensive range of Rotary Vacuum Film Evaporator (Buchi Type) is specifically designed to meet the various requirements of clients. To make sure of the finest quality and durability this machine is manufactured using advanced technology with latest machinery. This product is available in both standard as well as customized form at the most affordable prices.

 

Product Specifications:

 

• A.C. non-sparking geared drive unit
• Ball joint
• Feeding tube
• Vapor path tube’
• Thermostatically controlled stainless steel water bath
• Double coiled glass condenser with three opening for vacuum and cooling

 

Technical Specifications:

 

• Jack arrangement of stainless steel for positioning glass assembly
• Variable speed regulator
• Thermostatically controlled stainless steel water bath
• Double coiled glass condenser
• 3 openings for vacuum and cooling
• Pear shaped evaporating flask capacity: 800ml
• Receiver flask capacity: 1 liter
• All parts power coated with: Epoxy, Polyester hybrid, Siemens grey finish

Other Information

• Pay Mode Terms: L/C (Letter of Credit)
• Minimum Order Quantity: 1

With rich industry knowledge and experience, we are able to manufacture and supply supreme quality centrifuge machine.  The offered machine is extensively used in various pharmaceutical industries due to its reliable performance, durable finish standards, dimensional accuracy and robust construction. This product is manufactured using class materials obtained from leading sources in the market.

 

Technical Specifications:

 

• Capacity: 6 tubes
• Lid lock
• Speed control: Analog
• Power requirements: 220V
• Plug and Power lead provided

Electronic stimulator offered by us is well known for owing to the superior quality features like durable finish standards and high tensile strength. This product is extensively used in different industry for slaughtering purposes. Further, this product is manufactured using quality material as per defined industry standards to maintain its compliance with important international quality parameters.