K- Tek Level Engineering Private Limited

K-TEK KM26 magnetic liquid level gauges are fabricated from top
grades of material using innovative techniques. These can also be developed as
per the definite requirements of our esteemed clients. To ensure optimum performance in extreme temperature
environments, we furnish / fabricate KM26 MLG in our factory. This also offers heat tracing and high temperature
insulation. With assurance of high performance, we offer precision magnetic
coupled liquid level gauges with a 5
year warranty.

One of our most popular level measuring instruments, thermal
dispersion switches are used for flow, level and temperature. It comprises of 2
ratio-metrically matched temperature sensors. These sensors are of two types :
 

• Temperature sensors used on standard units


• Platinum RTD (Resistance Temperature Detectors) sensors used
  for high temperature applications

 
To ensure their optimum performance, the sensors are placed at
a short distance from each other. The selection of two sensors is done carefully
so as to enable tracking of each other with temperature. The resistance of
these sensors is proportional to its temperature and is appreciated for its
accuracy over a wide temperature range. These thermal dispersion switches come
with a 2 year warranty.

Magwave dual chamber level system is extremely easy to use and
handle. This durable level system is ideally used in insulation for high and
low temperature applications. Offered with 5
year warranty, it includes a clearly
visible level indicator, in addition to following :
 

Single Probe Guided Wave Radar Transmitters (No need for coaxial probes)	Compact Close-Coupled Chambers
Separate Chambers Provide Unobstructed Float Travel	Extruded Outlets and Smaller Chamber Sizes
Precision Fabricated Floats	Temperature Range - 60 F to 800 F (-51 C to 427 C)
Pressures to 3000 psi (207 bar)

 
In case of special requests from our customers, we can add
extra transmitters and switches for redundant measurement. Moreover, we also
provide vent, drain, and isolation valves, as optional accessories with our
dual chamber level system.

Marketed with a 2 year
warranty, our guided wave radar level transmitters have a graphic display
which is incorporated into a module of all digital electronics. Our radar level transmitters  are a new
format which allows us to add waveform screens to the modular electronics apart
from ensuring multiple choice setup menus that are extremely easy to follow.
These radar level transmitters are interchangeable in different languages that allow their simple commissioning
throughout the earth.
 
The MT5000 series of our guided wave radar transmitters provide
higher performance, even in tough applications. A flexible cable type probe or
a rigid rod is used to ensure proper direction of microwave energy pulses to
the product’s surface. As this assembly has no moving parts, there is
absolutely no loss of energy due to beam divergence.
 
We also offer multiple coupler & probe types which assist
in accommodating various applications such as :
 

• Knock out drums


• Feed water heaters


• Production vessels and separators

 
To ensure the high quality standards of our guided wave radar
level transmitters, we use 316L stainless steel as the standard probe material.
Though, for its use in caustic / acidic services, material such as Monel and Hastelloy
C- 276 are also available.

Our range of laser transmitters is used for level, distance
& positioning. These innovative level detection products possess a
first-all digital design which unites speed and accuracy for non-contact,
nonstop level measurements. Offered with a warranty
of 1 year, the applications of our laser transmitters includes :
 

• Pellets (converters)


• Slurries


• Opaque liquids


• Tall bin


• Silos

Ksonik ultrasonic level measurement instruments are used for
detection of liquid & solids ultrasonic levels. These instruments are based
on TOF or Time-of-Flight of a sonic signal. These signals are emitted and then
reflected by an object or measurable substance.
 
For precise and reliable level measurement instruments are
developed by using modern ultrasonic technology. This assists in finding and
tracking the sound echo. Our ultrasonic level transmitters analyses every shot
automatically and dynamically adjust the next one, on basis of tank or vessel
conditions.
 
To acquire an echo every time for optimal level measurement
& results, our unique KSONIK transmitter can increase:
 

• The signal gain


• Unit power


• And can shift the threshold

 
Ksonik ultrasonic level measurement instruments are marketed
with a warranty of 1 year.

We offer a range of mechanical level switches that find usage
in various applications in different industries. These switches have a rugged
as well as robust chamber design which ensures its high performance in
demanding applications. Offered in 8 standard designs and 6 compact switching
mechanisms, our range of mechanical level switches possesses following special
attributes :
 

• One step switch point adjust


• Precision fabricated floats and displacers


• Compact switching mechanism eliminates bulky housing
  


• Traditional bias springs


• Easily retrofitted to most competitor models

 
The range of precision mechanical level switches is offered
with a 5 year warranty.

We offer mechanical seal protection which is a seal protection
apparatus which is used for providing protection for main mechanical seal. It
comprises of :
 

• A seal ring, fast on the shaft of a pump


• Another seal ring, connected to the casing of the pump

 
The second seal in connected via a flexible & annular
diaphragm which is exposed on one side to the pumped product in the casing. One
end of the service liquid compartment is defined with a combination of seal
rings & diaphragm. Whereas, the another end is defined by the main seal.
 
With the flow of service water to the compartment, the seal
rings are forced apart by the pressure of water. The water is easily leaked
between the rings into the casing. This denies the pumped product access to the
main seal and compartment. In case of water shortage, the pumped product will
act on the diaphragm forcing the seal rings together. Again, the pumped product
is denied access to the main seal.

Leveraging on our huge industry experience, we offer rotary
paddle switches in standard and customer specific configurations. These
switches are ideally used for solids. Our durable switches have a rugged design
which is compatible with various :
 

• Bulk solids


• Pelletized applications


• Graunlar applications

 
The KP rotating paddle switches can also be used for level
indication of materials with densities of 10 lbs/ft³ and more. These are
suitable for use in various installations where different bulk material are
contained in hoppers, silos, bins and tanks. Some of the common applications of
our range includes :
 

• Sawdust


• Malt


• Oats


• Resin


• Flour


• Peanuts


• Feed

 
The KP rotating paddle switches are marketed with the warranty of 2 years.

We offer a range of plumb bob device which is ideally used for
various types of bulk solids. The KB bob is very easy to install and has a
simple start-up. It enables extremely accurate measurement and includes an
integrated internal tape cleaner (tape version).
 
We offer a variety of sensor weights. The KB has a robust die
cast housing & dual compartment enclosure. Rope and tape models are also
available with us. The KB bob is insensitive to :
 

• Changes in product density


• Dust in the silo


• Changes in moisture of the material


• Products that are inclined to stick

Marketed with a 2 year
warranty, our RF capacitance transmitters and switches possess following
attributes :
 

• One-step external calibration


• Immunity to material build-up


• Wide selection of probes for even the most challenging
  applications

 
Their main applications range includes low dielectric bulk
solids to sticky slurries. A highest collection of probe elements in these
transmitters and switches enables it to be used in following applications :
 

• Liquids


• Pellets


• Granules


• Powders


• Chips or Flakes and others

 
Moreover, absences of any moving part in our range assure no
breakage or wear out.

Our vibrating level switches make use of a piezoelectric-driven
tuning fork which shows a large change in resonant frequency upon the immersion
into a liquid or bulk solid process. A "Smart" Microprocessor-Based electronic
unit ascertains to keep the sensor in a resonant state as it changes from dry
to wet or wet to dry.
 
The foremost attribute of these switches is that their resonant
frequency is not considerably affected by the coating on fork, until the
bridging of space between the forks. Offered with a 1 year warranty, our vibrating level switches are used in various applications
such as redundant high/low process levels without concern for parameters such
as specific gravity, dielectric constant or mounting position of the sensor.