IndiaMART.com

Verified Supplier
Kolkata, West Bengal
ORCall:
Products & Services

Industrial Oils

We are leading Supplier & Manufacturer for the Industrial Oils which also includes Hypol Oils & Axel Oil Heavy since 2010

Hypol Oils

Hypol Oils

Hypol oils are premium quality hydraulic oils blended from highly refined base stocks and fortified with anti-oxidant, anti-rust, anti-wear & anti-foam additives. These outstanding quality Hydraulic Oils are recommended for sophisticated high performance Hydraulic Systems.

Axel Oil Heavy

Axel Oil Heavy

KPCC Axle oil primarily intended for use as a lubricant in plain bearing axles. Technical Specifications
Kinematic Viscosity at 60°C 98 CST
Pour Point -5°C
Pensky martens Flash Poit (Closed) 170°C
Asphaltene centene 0.01%
Acidity :- a) Inorganic b) Organic (mgk.H/g of the oil) Nil 0.3
Ash % 0.01
Copper Strip Corrosin Negative
Water Content Nil
Saponification Value 1
Viscosity Index 70

Quenching Oils

Quenching Oils

Technical Specifications :


Kinematic at 40 C 32CST
C. O. C. Flash Point 196°C
Viscosity Index 95
Saponification value 9

Super Gear Oils

Super Gear Oils

These type of gear oils are extreme pressure type industrial gear oils, which contain sulphur & phosphorous compounds and have better thermal stability and higher oxidation resistance. These oils have good demulsibility low foaming tendency and provide rust & corrosion protection to metal surface. These oils meet ZS-8406 of1977. These oils are recommended for all heavy duty enclose Gear drive with circulation of splash lubricating system operating under heavy or shock load conditions.

Neat Cutting Oil

Neat  Cutting  Oil

KPCC Neat Cutting oil is intended for Lubrication and cooling of metal surfaces during metal cutting operations.

TECHNICAL SPECIFICATIONS

 

 

Kinematic at 38°C

40CST

Pensky Marten (Closed) Flash Point

158°C

Ash %

0.001

Copper Strip corrosin

Negative

Saponification Value

6

Acidity organise mg/koh (per gm)

4

Low Temperature stability

Passes

Reacting Sulpher at 100°C % byweight

0.4

 

Soluble Cutting Oils

Soluble Cutting Oils

Technical Specifications :


Characterstics B. NO. KPI/0672000-2001 DT. 2000-2001 IS Specification
Ash, percent by mass, Max 1.8 3.5
Water, percent by mass, Max 2 10
Emulsion test 5:1 and 20:1 ratio in water of 400 ppm hardness (as CaC03) Passes 1 ml. oil and 0.2 ml.
Forthing test 5:1 and 20:1 ratio in 200 Passes                   No forth after 15 months
Cast iron corrosion test 20:1 ratio emulsion with 400 ppm hard water as CaC03 (max) Passes 01/01/12
Copper strip corrosion Test Passes Not worse than No.1
Tharmal Stability Test Passes Shall pass the Test
Flash point, COCC 160 150
Viscosity at 400C CST Min 25 20
Volatile matter at 1 we the 16 Hrs. 5 20

Gear Oils

Gear Oils

Gear Oils are hypoid gear oils blended with highly refined HVI oils and fortified with extreme pressure additives. These oil meet API service classification G.L. - 4 & MIL - L - 2105. These premium quality Gear Oils are recommended for hypoid spiral bevel or worm gear transmission systems of car, buses tracks etc.

Engine Oils

Engine Oils

This oil is a premium quality engine oil blended from flighty refined, high viscosity index base stocky fortified with carefully selected additive package. It gives excellent lubrication service for old seasons in petrol & naturally aspirated diesel engines. This oil possesses high oxidation stability & excellent thermal stability. It meets API SC.CD, MI-L-2104C performance level.

Product Code: Sae-d

To,Kundu Petro - Chem Corporation

Promote Your Business with IndiaMART
Enter Your Website URL
RELATED COMPANIES