Showcase
View all our products / services as a slide show.
|
|
Power Measurement & Control Instruments
|
|
We source a wide range of Power Measurement & Control Instruments that are mainly designed using high grade raw material, which is procured from our experienced vendor base. Furthermore, our instruments are excessively used in major industries due to their sturdy composition, long functional life, high performance and cost-effectiveness. This range of instruments consists of the following: |
| Microprocessor Multifunction Trms Power MeterItem Code: 7200A | UNIQUE FEATURES |
| | * 3 Displays at one time | 3V` 3A` W` Var` WH` VarH` PF` Hz | | * Applicable Standard | DIN-IEC 688 | | * Output/Display/Setting Range User Selectable | | * Suitable for | 1Φ 2W; 1Φ 3W; 3Φ 3W; 3Φ 4W. | | * 10 Years Power-Off Memory for WH & VarH | | * With RS-485 or RS 232 Communication Ports, Modbus RTU Output | | * Software for Load Analysis (optional). | | * User friendly programming. | | |
Microprocessor Trms Max. Demand ControllerItem Code: 7200B | UNIQUE FEATURES |
| | *3 Displays at one time | 3V, 3A, W, Var, WH, VarH, PF, Hz. | | * Applicable Standard | DIN-IEC 688 | | * Suitable for | 1Φ 2W; 1Φ 3W; 3Φ 3W; 3Φ 4W. | | * 10 Years Power-Off Memory for WH & VarH | | * With RS-485 or RS 232 Communication Ports, Modbus RTU Output | | * User friendly setting of Demand parameters | | * Demand Time interval setting (0-60 minutes) | | * Synchronising time with Electricity Board meter timing. | | * Maximum Demand (Sanctioned Demand) & Target Demand Setting. | | * Displays Demand forecast | | * Displays Remaining Time interval (of the demand period). | | * Displays Present Demand. | | * Displays usable remaining Demand. | | * Software for Load & Demand Analysis (optional). | | OUTPUT : | | 4 Relay outputs for Demand Control : In this instrument we can set the TARGET DEMAND (approx. 10%) below the SANCTIONED Demand. When the present Demand exceeds the target demand, the relay output switches ON. These relay outputs can be connected to least priority loads. When the relay turns on, the loads are switched off. When the present demand falls below the target demand, the relays switches ON the loads one by one. Delay time can be set for the relay control. Thus the present demand never exceeds the sanctioned demand & the customer is saved from paying penalty. This instrument displays the remaining usable Demand, so that the load schedule can be programmed accordingly. | | | |
| Microprocessor Multifunctions Trms Power MeterItem Code: 7200C | UNIQUE FEATURES |
| | *3 Displays at one time | 3V, 3A, W, Var, WH, VarH, PF, Hz. | | * Applicable Standard | DIN-IEC 688 | | * Suitable for | 1Φ 2W; 1Φ 3W; 3Φ 3W; 3Φ 4W. | | * 10 Years Power-Off Memory for WH & VarH | | * With RS-485 or RS 232 Communication Ports, Modbus RTU Output | | * User friendly setting of Demand parameters | * Harmonics : Analyses Voltage & Current Harmonics upto 31st Harmonics.
Displays Voltage & Current Harmonics upto 15th Harmonics. | | * Software for Load & Demand Analysis (optional). | | |
Multifunctional Trms Power MeterItem Code: KM6300 | UNIQUE FEATURES |
| * Measurement of current, voltage, active, reactive and apparent power, Power factor, line frequency, energy, harmonic and Maximum Demand.
| | * High-brightness LED display | | * Extreme accuracy up to 0.25% | | * Programmable adjustment for current and voltage transformers ratio | | * With RS485 or RS232 output | | * Neutral current can be indicated | | * Dual relay contacts for energy or alarm output | | * Optional Harmonic Display. | | * Optional dual current loop output. | | * Setting protected by password | | * Memory of all setting value and energy data over ten years. | | * Outside dimension compatible for DIN standard 144x144mm | | | |
| Multifunctional Power MeterItem Code: KM9600 | UNIQUE FEATURES |
| * Measurement of current, voltage, active, reactive and apparent power, power factor, line Frequency, energy, harmonic and MD.
| | * High-brightness LEDs display | | * Extreme accuracy up to 0.2% | | * Programmable adjustment for current and voltage transformers ratio | | * RS485 output (optional). | | * Indication of neutral current | | * Dual relay contact for energy or alarm output (option) | | *Dual analog output (option) | | * Setting protected by password | | * Memory of all setting values and energy data over ten years. | | * Memory of the Max. And Min. Values (V.A.W) | | * Outside dimension compatible for DIN standard 96 x 96 mm | | |
System Analyzer Software for Power Meter | FEATURES |
| | Smart Analyser is the most effective & Powerful Data Management Software available. It Monitors all Power Parameters including Demand & Harmonics. The Software can moniter data from KUSAM-MECO power meters (KM-PM-8100, KM-PM-7200,KM 6300, KM 9600). This software kit consists of CD, USB Hardware lock, RS485-RS232 converter, one meter length communication cable. On Installing the software using the CD, the PC will prompt the user forthe "Hardware Lock" . The hardware lock is to be connected to a USB port on the PC. After the RS 485 converter is connected to the meter & the PC, the communication is established. Transformer Testing : Feeder Monitoring in Steel / Power Plants. The data from the meter can be viewed on the PC in text as well as graphical form. The different types of screens available in the software are : - Realtime values display of all parameters measured by the power meters.
- RS485 communication status of all meters connected. (256 Nos. meters can be connected for monitoring data which can increase using repeaters.
- Real time graphical displays of all parameters with zoom facility
- Historical trend (graphical format) for all parameters
- Alarm report and indication for exceeded alarmed parameters
- Tariff ( for cross checking energy bills)
- KWH report in tabular format with total consumption for the selected period
- Bar graph and pie chart for KWH report
- Emailing alarmed parameters on exceeding alarm set limits
- PC base audio and visual alarm indication
- Backup, restore, delete facility for data
- User selectable data logging interval.
- Down loading of stored data (5000 readings ) form meter into software.
- Report Generation in Excel format of all stored data.
With help of the software we can : @ Do comparison of all parameters through graphical representation.
@ Do statistical analysis of parameters (i.e.max. / min. / average demand of a day / month).
@ Generate report of present & previous data. The Software can also be customised to display & generate reports to suit one's requirement.
e.g. Testing of Motors RS-485 CONNECTION
RS-485 communications allows multiple devices to be connected on the same bus. UP to 30 devices be connected on a single RS-485 bus, which consists of shield twisted pair cable. The overall length of the RS-485 cable connecting all devices cannot exceed 4000 ft (1219m). | | | |
| Intelligent Power Factor RegulatorItem Code: KMPFR | UNIQUE FEATURES |
| The pioneers & leaders in high quality power factor controllers & maximum demand controllers, now introduce 2 new economy models of power factor controllers. These controllers have microprocessors for automatic control of power factor. It has digital indication for power factor.
| | * Simple Operation. | | * Automatic self adjustment for C/K value. | | * Three different types of Operation sequence (1:1:1:1...) (1:2:2:2...) (1:2:4:4...). | | * The set data is preserved for atleast two months in the event of Power failure. | | |
Power Factor RegulatorItem Code: KM-PFR-S MODEL- KM-PFR-S-9-04, KM-PFR-S-9-08, KM-PFR-S-9-12 | UNIQUE FEATURES |
| | * Standard DIN size 144 x 144 mm for easy installation in control panels. | | * KVAR based power factor controller. | | * Precise compensation of reactive power with automatic calculation of C / K. | | * Calculate the throw-cutoff capacitance according to reactive power, high precise in compensation. | | * Friendly operation methods of human-machine interface. | | * All kinds of controlling parameter total digital directly adjustable, easily use. | | * Automatically operation and manual operation. | | * Over-voltage and low-voltage protection. | | * Protect from losing of unsaved data in case of power cutoff. | | * Automatic phase-detect function, auto cutoff the voltage signal & the current signal at the same section. | | * High sensitivity, operate under 100mA signal current. | | * Seek the best to throw-cutoff, prolong the life span of the equipment | | | |
| Digital Multifunction Power MeterItem Code: KM-5400 MODEL KM 5400 | KM 5400 Multifunction Power Meter is a special instrument for measuring electrical network parameters. The measured parameters are displayed on 5 rows of display, which can measure and manage more than 50 electrical networks parameters at the same time, KM 5400 provides the line voltage, phase voltage, active power, reactive power, apparent power, active kilowatt hour, reactive kilowatt hour and so on electrical network Parameters, at the same time, it provides the demand value of phase current, total current, total active power, reactive power and apparent power, KM 5400 has 485 communication interface, adjustable voltage, current transformer ratio and various voltages input mode to enable it to adapt to the electricity usage situation of many kinds of different voltages specification. | | | | FEATURES : |
| | • Measurement of Current, Voltage, Active Power, Reactive Power and Apparent Power, Power Factor etc. | | • High - brightness RED LED display. | | • High accuracy upto 0.5% | | • Programmable adjustment for current and voltage transformers ratio ( CT / PT ) ratio | | • With RS485 output (optional) | | • Indication of maximum and minimum value of Voltage and Current | | • Indication of Maximum demand current and power | | • High-brightness RED LED display. | | | | ELECTRICAL SPECIFICATION : | | * Accuracy | Class 0.5 | | * Input Current | 0-5 A AC | | * Input Voltage | 30-300 VAC (Phase line -Neutral )
30-500 VAC (Phase line -Phase line ) | | * Current Transformer Ratio | 5-9000/5A | | * Voltage Transformer Ratio | 1-2000 | | * Voltage Input Mode | 3 Phase 4 wire or 3 phase 3 wire. | | * Auxiliary Source | 100 VAC +20 % OR 220 V AC + 20 % | | * Working Frequency | 45 Hz 65 Hz, self adaption Measurement range | | * Communication Software Conventions | M0DBUS RTU | | * Communication Hardware Convention | RS 485 | | * Communication Speed | 4800, 9600, 19200, 38400, 115200 Bauds. | | * Communication Address | 1-255 | | * Power Consumption | Auxiliary Source <4 VA, Signal Sampling <0.5 VA | | * Average Demand Time | 15 min | | * Working Temperature | -10°C ~ + 50°C | | * Storage Temperature | -30°C ~ + 70°C | | * Protection Class | IEC 61010-1, IEC 61000-6, IEC 61000-4 | | * Panel Cutout Dimension | 90mm x 90mm | | * Installation Mode | Panel Flush type | | * Weight | 0.3 Kg. Approx. | | | |
|
