FEATURES
	Digital Tachometer uses latest technology for accurate measurements. It has Exclusive one chip of Microcomputer LSI Circuit, It is housed in tough ABS case & has ergonomic design for easy holding in the hand.

Send Enquiry

Stroboscope

Item Code: KM-2239A

FEATURES

* Measuring TACH and vibratility by noncontact
* Large LCD display with backlight
* Digital Control adjust flash Frequency
*Low power consumption
* Measure range : 60 ~ 9999 RPM
* Measure range : 60 ~ 19,999 RPM(KM 2240)
* Coarse / Fine adjust amplitude :
   < 1000 RPM Coarse adjust : ± 10 RPM
                                Fine adjust : ± 0.1RPM
   > 1000 RPM Coarse adjust : ± 100 RPM
                                Fine adjust : ± 1RPM

Send Enquiry

Ultrasonic Distance Meter

Item Code: KM-972M

FEATURES

Measure Distance	:	upto 15 m
Torch / Flashlight
Add Calculation	:	upto 99.99m.
Laser Target Pointer
Area Calculation	:	upto 999.99m²
Volume Calculation	:	upto 999.99m³

Send Enquiry

Coating Thickness Gauge

Item Code: KM-117

INTRODUCTION

KM-117 is a portable easy to use 3½ digit, compact-sized digital coating thickness gauge sighting designed for simple one hand operation. Meter comes with Backlit LCD display, Auto-Hold function and Auto Power Off (15 seconds approx.) after releasing trigger to extend battery life.

FEATURES

* Measure magnetic and non-magnetic materials for all metals (KM 118)
* Measure magnetic coating (KM 117)
* Automatic substrate recognition for quick measurements (KM 118)
* Ideal for coating inspections, paint applications and automotive refinishers
* Portability and simplicity one hand operation
* Select the on-line display for one of MAX, MIN and MAx-MIN
* 2-point calibrations
* Auto-holding reading
* Auto-power off

Send Enquiry

Vibrometer/ Vibration Meter

Item Code: KM-63

INTRODUCTION

It’s a hand held, pocket vibration meter, used for measuring vibration acceleration, speed and displacement of rotating machine.

APPLICATIONS

* To check motors pumps heavy machinery etc.
* To check bearing condition
* To check the Lubrication machinery
* To check Contamination
* To check misalignment
* To check for looseness in Motors
* To check for in balance in machinery

Send Enquiry

Phase Sequence Meter

Item Code: KM-981M-K

FEATURES

Description : It is used to measure the opening phase condition and order through LED and Buzzer.

Operational Voltage	:	60~600V (3 phases AC)
Limit support Voltage	:	2000V/minute (impulse Voltage 4000V)
Measuring frequency range	:	20Hz~400Hz
Time limit for continuous measurement	:	60 minutes at 200V AC 4 minutes at 600V AC
Meter Size	:	85 x 64 x 23mm (exclude the measuring lead)
Meter Weight	:	Approximate 200g.

Send Enquiry

Network Cable Tester

Item Code: KM-36

FEATURES

* It can quickly test Ethernet 10Bose-T(TP/STP), AT & T258A, EIA/TIA 568A/B, 8-Position Token Ring, and
USOC4/6/8 modular cable.

* It does automatic test for open Circuits, Shorts, miswires, reversals.

* It’s main unit and remote unit allow One Person Testing.

* Size is 115(L) x 95(W) x 28(H)mm.

* It requires DC 9V battery.

* Accessories : Carring Case, Test Leads, manual,

Send Enquiry

Temperature Monitor & Controller

Item Code: TMC-3

FEATURES :

• Display Temperature 0 ~ 250°C

• Three phase coil / Average / Maximum Temperature

• Over-Temperature alarm / fans / trip

• Set time for fan to automatically operate / manual operation

• Drive two industrial fans directly

• Fuse protection.

• Broken-sensor alarm won’t cause misoperation affecting system.

• Built-in high decibel buzzer.

• RS-485 Modbus-RTU mode.

• With one additional analog output 4-20mA.

• With one additional input controlled independently by relay.

Send Enquiry

Contact us
Mr. Pradeep Goliya G-17, Bharat Industrial Estate, , Tokershi Jivraj Road Mumbai, Maharashtra - 400 015, India Telephone: +(91)-(22)-24181649/ 24124540/ 24156638		Contact via E-mail

Business Enquiry Form

Close(X)

Add More Products / Services

(* represents compulsory fields )

*Describe Your Requirements in Detail

Please Fill Your Contact Information

*Contact Person:

*Email:

Company:

Street Address:

*Country:

*Telephone:

Mobile:

Website:

*Enter the code:

Send me a copy of this enquiry