We manufacture and export a qualitative range of Abrasives Medias & Shots. These are fabricated using quality raw materials and advanced production techniques. Our range also complies with the international quality standards and offers excellent performance. |
Abrasive Grits & Shots
The selection of abrasive and a particular Mesh size depends upon the process requirement like the Job hardness, surface finish required after blast cleaning and upon the blasting application. Abrasive media are available in different grain sizes according to respective mesh / Sieve sizes. Various abrasive medias most commonly used are available with kushal udyog. |
|
|
|
|
|
|
Steel Cut Wire Shots
We offer our clients with a qualitative range of Steel Cut Wire Shots. These are ideal for general purpose cleaning, de-scaling, de-burring, de-flashing, and shot peening on components of steel. Our range can also be used for commercial cleaning on casting of aluminum and zinc. These steel cut wire shots that we offer are hard, dense, pellet shape, lower breakage, produces low dust, longer recycle life and available in the following specifications : -
Mesh Size : CW 54 – 12 -
Size : 1.4 – 0.30 mm |
|
Steel Grit
We bring forth our clients with a qualitative range of Steel Grits. These are ideal for obtaining consistent surface roughness on ferrous castings, fabricated parts. Our range is not recommended for non-ferrous parts such as aluminum, brass, wood, and plastic. These steel grits that we offer are hard, dense, angular shape, lower breakage, produces low dust, longer recycle life and available in the following specifications : -
Mesh Size : 12 – 52 -
Size : 1.4 – 0.30 mm |
|
|
|
|
|
|
Chilled Iron Shots
We are engaged in offering our esteemed clients with a qualitative range of Chilled Iron Shots. These are widely used for general purpose cleaning, de-scaling, de-burring, de-flashing, shot peening on components and can be used for commercial cleaning on casting of aluminum and zinc. The chilled iron shots offered by us are hard, dense, spherical shape, lower breakage, produces low dust, longer recycle life and available in the following specifications : -
Mesh Size: 8 – 52 -
Size: 2.0 – 0.30 mm |
|
S.S. Shots
Our clients can avail from us a qualitative range of S.S. Shots. These are ideal for special purpose cleaning, de-scaling, de-burring, de-flashing, finishing, shot peening, on ferrous and non ferrous components without the fear of iron contamination on the treated surface. Our range of S.S. shots is hard, dense, spherical shape, lower breakage, produces low dust, longest recycle life and available in the following specifications : |
|
|
|
|
|
|
Aluminum Oxide Grit (Commercial & Virgin)
We offer our clients with a comprehensive range of Aluminum Oxide Shots. These are made available in both commercial and virgin (pure) grades and are ideal for both dry and wet blasting purposes. Our range is recommended for both ferrous and non ferrous components without the fear of iron contamination on the treated parts. These are hard, brittle, angular shape, high breakage, produces moderate dust, low recycle life and available in the following specifications : -
Mesh Size : 12 – 240 -
Size : 1.4 – 0.06 mm |
|
Silicon Carbide Grit
We manufacture and offer our clients with a qualitative range of Silicon Carbide Grits. These are ideal for both dry and wet blasting purposes and recommended for hardened components of steel alloys. Our range is not suited for parts of aluminum , zinc and brass. These are hard, brittle, angular shape, high breakage, produces moderate dust, low recycle life, and available in the following specifications. -
Mesh Size: 12 – 240 -
Size: 1.4 – 0.06 mm |
|
|
|
|
|
|
Glass Beads
Our repertoire also includes a qualitative range of Glass Beads. These are ideal for both dry and wet process to gently clean, de-scale, de-flash, de-burr or shot peen at low intensity on SS, alloy steel where material removal allowed is negligible. Our range of glass beads is spherical in shape and has low breakage that produces lowest dust with long recycle life. These are available in the following specifications : -
Mesh Size: 18 – 350 -
Size: 0.85 – 0.04 mm |
|
Plastic Grit (Paint - O - Clean Grit)
Our clients can avail from us a qualitative range of Plastic Grits. These plastic grits are ideal for precise de-scaling, de-burring, de-flashing, shining or removal of old paint, and varnish on precision components while keeping the dimensional tolerances and finish intact. Our range of Plastic grit / paint-o-clean grits is soft, low, density, angular shape, lowest breakage, produces lowest dust, and longer recycles time. We offer these in the following specifications : -
Mesh Size: 18 – 36 -
Size: 0.85 – 0.42 mm |
|
|
|
|
|
|
Walnut Shell Grit
We bring forth our clients a qualitative range of Walnut Shell Grit. These are widely used for precise de-scaling, de-burring, de-flashing, shining or removal of old paint, and varnish on precision components while keeping the dimensional tolerances and finish intact. Our range of walnut shell grits is soft, low, density, angular shape, lowest breakage, produces lowest dust, longer recycle time, and available in the following specifications. -
Mesh Size: 18 – 36 -
Size: 0.85 – 0.42 mm |
|
Steel Shots
We have in our repertoire Steel Shots that are manufactured using quality Stainless Steel. These are ideal for use in general purpose cleaning, de-scaling, de-burring, de-flashing, shot peening on components of steel. Our range can also be used in commercial cleaning on casting of aluminum and zinc. These steel shots offered by us are hard, dense, spherical shape, lower breakage, produces low dust, longer recycle life, and made available in the following specifications. -
Mesh Size : 8 – 52 -
Size : 2.0 – 0.30 mm. |
|
|
|
|
